Rheological and extrusion characteristics of glass fiber-reinforced polycarbonate

An experimental investigation of the rheological properties of glass fiber-reinforced polycarbonate melts and the extrusion of such compounds through capillary and slit dies is presented. The viscosity–shear rate function seems independent of instrument for cone-plate and capillary investigations. The presence of fibers increases the level of the viscosity. Normal stresses at fixed shear stress are also increased by the presence of fibers. The extrudate swell is decreased by the presence of fibers and surface roughness is increased. Fiber orientation increases and surface roughness decreases with increasing extrusion rate.     

Oxidative stability of soybean oils with altered fatty acid compositions

The oxidative stabilities of one canola oil and six soybean oils of various fatty acid compositions were compared in terms of peroxide values, conjugated dienoic acid values and sensory evaluations. Two of the soybean oils (Hardin and BSR 101) were from common commercial varieties. The other four soybean oils were from experimental lines developed in a mutation breeding program at Iowa State University that included A17 with 1.5% linolenate and 15.2% palmitate; A16 with 2% linolenate and 10.8% palmitate; A87-191039 with 2% linolenate and 29.6% oleate; and A6 with 27.5% stearate. Seed from the soybean genotypes was cold pressed. Crude canola oil was obtained without additives. All oils were refined, bleached and deodorized under laboratory conditions with no additives and stored at 60°C for 15 days. The A17, A16, A87-191039 and A6 oils were generally more stable to oxidation than the commercial soybean varieties and canola oil as evaluated by chemical and sensory tests. Canola oil was much less stable than Hardin and BSR 101 oils by both chemical and sensory tests. The peroxide values and flavor scores of oils were highly correlated with the initial amounts of linolenate (r=0.95, P=0.001). Flavor quality and flavor intensity had negative correlations with linolenate, (r=−0.89, P=0.007) and (r=−0.86, P=0.013), respectively.     

Continuous polymerization of lactam–lactone block copolymers in a twin‐screw extruder

Continuous copolymerizations of ?‐caprolactone with ?‐caprolactam and ω‐lauryl lactam were carried out in a modular intermeshing corotating twin‐screw extruder. Sodium hydride (initiator) and N‐acetyl caprolactam (coinitiator) were used to synthesize lactam–lactone copolymers in a twin‐screw extruder. We consider the variables of feeding order and feed rate of comonomers on the reactive extrusion of lactam–lactone copolymers. It was observed that simultaneous feeding of both monomers with initiator and coinitiator in the first hopper produced a mixture of homopolymers. When we fed the lactam into the first hopper and caprolactone sequentially into the second hopper, we obtained the lactam–caprolactone block copolymers. However, when we fed caprolactone first into the first hopper and the lactam into the second hopper, the extruded product was a mixture of poly(?‐caprolactone) and lactam monomer. We synthesized high molecular weight copolymers of poly(caprolactam‐b‐caprolactone) and poly(lauryl lactam‐b‐caprolactone) with different block lengths by sequential feeding of monomers. The block length of the block copolymer could be adjusted by controlling the feed rate of each monomer during reactive extrusion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1429–1437, 2003     

Development and evaluation of terminally epoxidized triglycerides for coatings applications

Epoxidized 10-undecenoic acid triglyceride, an experimental seed oil derivative that has a terminal epoxy group on each of the three acyl glyceride segments, has been found to have good reactivity with amine curatives and allows room temperature cures to be obtained. Coatings based on epoxidized 10-undercenoic acid triglyceride have also shown excellent UV stability. As an example, coatings samples placed in a QUVA chamber exhibit no loss in gloss after 3000 hr of a cycled exposure to high intensity UV lamps and moisture at temperatures of 50–60°C. In comparison, coatings based on standard liquid epoxy resins (LERs) and commercially available hydrogenated LERs lose gloss due to chalking/decomposition within 200–800 hr. Presented at the 81 st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Propene Oxidation on Ag(111): Spectroscopic Evidence of Facile Abstraction of Methyl Hydrogen

Reactions of propene on an oxygen-modified Ag(111) surface were investigated by means of temperature-programmed reaction spectra and reflection--adsorption infrared spectroscopy (RAIRS) at 100 K. In the presence of oxygen adatoms, interactions of propene with the substrate are strengthened. The reaction between propene and oxygen adatoms (0.086 monolayer) produces not only total oxidation products (CO₂ and H₂O), but also partial oxidation products (CO and acetone). The formation of chemisorbed hydroxyl groups is identified by RAIRS when coadsorbed propene and oxygen adatoms are annealed to 200 K. The formation of hydroxyl is ascribed to the abstraction of methyl hydrogen by oxygen adatoms.     

Miscibility in poly-p-phenylene terephthalamide/nylon 6 and nylon 66 molecular composites

Miscibility and crystallization of poly-p-phenylene terephthalamide (PPTA)/nylon 6 and nylon 66 composites prepared by coagulation of isotropic ternary sulfuric acid solutions were studied. The apparent crystallinity of nylon 6 and nylon 66 in molecular composites was investigated by differential scanning calorimetry and Fourier transform infrared spectroscopy. The solvation of nylon 6 crystals in PPTA matrix was observed when the PPTA content exceeds 70 wt%. Cross-hydrogen bonding seems to be responsible for the virtual disappearance of nylon 6 crystals. Specific interaction between PPTA and nylon 6 macromolecules and phase separation during thermal treatment has been discussed.     

Evaluation and testing of a fracture critical bridge

The I-40 bridges over the Rio Grande in Albuquerque, New Mexico were due to be razed in the fall of 1993 due to geometry and traffic safety considerations, thus providing a unique opportunity for testing them. These medium span steel bridges represent a common design in the US and are classified by AASHTO as non-redundant ‘fracture critical’ two girder steel bridges (fracture critical classification means that failure of a primary member would probably cause collapse of the bridge). The subject bridge, built in 1963, is a 1275 foot (600m) bridge, and consists of three medium span continuous units with spans of 131′-163'−131′ each. The bridge was field tested to determine the impact of a near full depth girder fracture on the redistribution of loads, the load capacity, and the potential for collapse. Four levels of damage were introduced in the middle span of the north plate girder by making various cuts in the web and the flange of the girder. The final cut resulted in a six foot deep crack in the 10ft deep girder, extending from the bottom flange to the floor beam to girder connection. Data was taken under dead load and under a static live load consisting of an 82 000 lb truck. The after fracture response and the load redistribution in the fractured bridge were evaluated. The contribution of the different members to the redundancy of the structure was assessed.     

Cross-national differences in individual knowledge-seeking patterns: a climato-economic contextualization

Electronic Knowledge Repository (EKR) is one of the most commonly deployed knowledge management technologies, yet its success hinges upon employees’ continued use and is further complicated in today’s multinational context. We integrate multiple theoretical linkages into a research model, conceptualizing knowledge-seeking as an instrumental behavior, adopting the technology acceptance model to characterize the individual-level continued EKR knowledge-seeking behavioral model, and drawing on the climato-economic theory to explain cross-national behavioral differences. Using hierarchical linear modeling (HLM), we test the model with data from 1352 randomly sampled knowledge workers across 30 nations. We find that two national-level factors, climate harshness and national wealth, interactively moderate the individual-level relationship between perceived usefulness (PU) and behavioral intention (BI) to continue seeking knowledge from EKR, such that the difference in the strength of this relationship is larger between poor-harsh and poor-temperate nations than between rich-harsh and rich-temperate nations. We find similar cross-level cross-national differences for the link between perceived ease of use (PEOU) and PU but not for the link between PEOU and BI. Implications for research and practice are discussed.     

An approach using Dempster–Shafer theory to fuse spatial data and satellite image derived crown metrics for estimation of forest stand leading species

Leading species at the forest stand level is a required forest inventory attribute. Information regarding leading species enables the calculation of volume and biomass in support of forest monitoring and reporting activities. In this study, approaches for leading species estimation based upon very high spatial resolution (pixel sided <1 m) have been developed and implemented, with opportunities for improving attribute accuracy using data fusion methods. Over a study region located in the Yukon Territory, Canada, we apply the Dempster–Shafer Theory (DST) to integrate multiple resolutions of satellite imagery (including spatial and spectral), topographic information, and fire disturbance history records for the estimation of leading species.Among the data source combinations tested in the study, the QuickBird panchromatic combined with selected optical channels from Landsat-5 Thematic Mapper (TM) imagery provided the highest overall accuracy (70.4%) for identifying leading species and improved the accuracy by 3.1% over a baseline from a classification-tree based method applied on all data sources. Additional insights to the application of DST to fuse satellite imagery with ancillary data sources to map leading stand species in a boreal environment are also elaborated upon, including the range and distribution of training data and DST mass function establishment.