Nonstationary processes in a controlled electric drive with a high-voltage frequency converter intended for a mainline pump of a heat-supply station

Results of the studies of nonstationary electromagnetic and electromechanical processes that develop during the start-up (restart) of a frequency-controlled electric drive of a mainline pump as result of perturbation in the electric supply system are presented.     

Hydrogen reduction kinetics of electrometallurgical slime

The interaction of hydrogen with the zinc-containing electrometallurgical slime of the Severstal’ metallurgical works has been studied. The sequence of transformations in the slime heated to 1100°C in hydrogen or air has been established. The experimental and calculated weight losses coincide. Some of the carbonates are shown to decompose in the temperature range 300–700°C, and most iron and zinc oxides are reduced to a metal. In the temperature range 650–850°C, zinc is almost completely sublimated. At temperatures above 800°C, complex oxides are reduced and calcium and magnesium carbonates and sulfates are likely to decompose. Experimental digital data on the zinc sublimation rate are processed by the least squares method with approximating equations used in thermal analysis. The kinetics of nonisothermal zinc sublimation is comprehensively analyzed using a unique procedure developed for taking into account the background of a peak and the effect of accompanying processes. An equation for the calculation of the zinc sublimation rate under experimental conditions (fluidized bed) is given and tested.     

Calcium and phosphorus levels as indices of textured milk proteins being substituted for meat proteins

Textured milk proteins were tested in a meat model system with an exchange level of 34-87% of the meat proteins. The correlation between the substitution index and the calcium and phosphorus content was statistically significant.     

From practical methods to theoretical foundations

The year 2006 marks the ninetieth anniversary of the air navigation (later called navigation) service of the Air Forces of this country. The history of air navigation is investigated, and an opinion about its modern state and directions of further development is presented.     

Change in computer hardware and software paradigms

The change in the paradigm of the development of processors and software for the processors is considered. This change is caused by the continuous progress in the technology of semiconductor microchips that is described by Moore’s law.     

Harmonic passive mode-locking with active loss and refractive index modulation

Passive mode-locking with equidistant ultrashort pulses in the laser cavity due to additional weak modulation of the losses or the refractive index is analyzed. The velocity of the relative pulse motion and the time of establishing the harmonic passive mode-locking mode are analytically estimated. Original Russian Text ￠ A.K. Komarov, 2007, published in Avtometriya, 2007, Vol. 43, No. 3, pp. 100–104.     

Influence of phosphorus element on direct laser sintering of multicomponent Cu-based metal powder

This article presents a detailed investigation on the influence of the phosphorus element upon the laser sintering of a multicomponent Cu-based metal powder system consisting of Cu, Cu-10Sn, and Cu-8.4P. Powder systems containing 0, 10, 15, and 20 wt pct CuP were sintered in atmosphere at room temperature using the following optimal processing parameters: laser power of 350 W, scan speed of 0.04 m/s, scan line spacing of 0.15 mm, and layer thickness of 0.25 mm. It was found that the relative density of the sintered sample with 15 wt pct CuP increased by 24,4 pct as compared with the sample without phosphorus addition. A further increase in the CuP content (≥20 wt pct), however, resulted in a poor densification with a serious delamination. The exact metallurgical roles of the phosphorus element in the laser sintering process were addressed as follows. First, the phosphorus could prevent the sintering system from oxidation by forming CuPO₃, thereby improving the wetting characteristics and the sintering kinetics. Second, the phosphorus could decrease the surface tension of molten materials, leading to a successive transition from highly discontinuous sintered tracks to fairly coherent ones with increasing the phosphorus content. Third, the phosphorus could lower the melt viscosity, thereby improving the microstructural homogeneity of the laser-sintered samples.