Ti/Al Interaction and Austenite Grain Control in Crankshaft Manufacturing with 38MnSiVS5 Steel

38MnSiVS5 steel is similar to 38MnVS6 steel (EN), the difference being the addition of a small Ti content. Typical Ti and Al contents in the chemical composition of 38MnSiVS5 steel are Ti=0.020 and Al=0.035 mass%. Both elements combine easily with nitrogen, especially Ti, and it has been observed that relatively high Al levels are harmful for austenite grain size control at reheating temperatures. In this work 38MnSiVS5 steel is used to manufacture a large number of castings, varying only the Ti and Al contents and obtaining ingots with a different Ti/Al ratio in each case. The results show that abnormal growth of the austenitic grain occurs irrespective of the Ti and Al contents, due fundamentally to the partial dissolution and coarsening of TiN precipitates. However, the steels with high Al contents present worse behaviour due to the formation of a second type of precipitates, namely AIN, which quickly dissolve between 1000 and 1100°C, causing a drastic decline in local pinning forces that gives rise to more pronounced abnormal growth of the affected grains.     

An Eshelbian approach to the nonlinear mechanics of constrained solid-fluid mixtures

Summary.  Looking at rational mixture theories within the context of a new perspective, this work aims to put forward a proposal for an Eshelbian approach to the nonlinear mechanics of a constrained solid-fluid mixture, made up of an inhomogeneous poroelastic solid and an inviscid compressible fluid, which do not undergo any chemical reaction. Received July 26, 2001; revised May 15, 2002 Published online: January 16, 2003     

A comparative study of the electrochemical behaviour of Algerian zinc and a zinc from a commercial sacrificial anode

Zinc is used in the oil industry as a sacrificial anode for protecting steel storage tanks from corrosion. The behaviour of a sample of zinc from the Algerian metallurgy industry (zinc A) and a commercially available zinc (zinc B) was compared in an electrolyte from storage tank drainage water. The corrosion potential measurements for zinc A confirmed that this material could be used as a sacrificial anode. The polarization curves of the two materials (zinc A and zinc B) were different, zinc A being the least polarized. Thus, the same corrosion protection could be obtained with a lower surface ratio (S _Zn/S _Fe) for Zinc A. Cyclic voltammetry curves provided evidence of a surface layer formed by dissolution products. To provide protection over extended periods of time, the zinc anode must be oversized. The two types of zinc tested were comparable.The results of the impedance spectroscopy study confirmed the previous results. The corrosion layer formed on zinc A was not prejudicial to dissolution. Hence, the properties of this zinc were found to be satisfactory for its use as a sacrificial anode.     

New insights into the relation between channel hot carrier degradation and oxide breakdown short channel nMOSFETs

In this letter, we report new findings in the relation between channel hot-carrier (CHC) degradation and gate-oxide breakdown (BD) in short-channel nMOSFETS biased at V/sub G/>V/sub D/. We observe that the time-to-BD is strongly reduced in the hot carrier regime and that although the channel hot-electron injection into the oxide occurs mainly at the drain side, stress-induced leakage current (SILC) generation and oxide BD always occur at the source side. The results of these measurements indicate that not solely the energy of the injected electrons but also the oxide electric field is determinant in the oxide BD process.     

The Effect of Moisture Content on the Conversion of Ergosterol to Vitamin D in Shiitake Mushrooms

The distribution of ergosterol in different parts of shiitake mushrooms was studied in order to optimize the conversion of ergosterol to vitamin D₂ during drying. The effect of moisture on the conversion of ergosterol to vitamin D₂ was also investigated by adjusting the moisture content of fresh mushrooms to different levels in a large vacuum desiccator and subjecting them to UV irradiation at 290-320 nm wavelength, for 2 h. The moisture, ergosterol and vitamin D₂ contents were determined using standard procedures. It was found that the ergosterol content on a dry matter basis of fresh shiitake mushroom was highest in the gills (10.6 ± 0.99 mg/g DM), followed by the cap or pileus (5.34 ± 0.64 mg/g DM) and was least in the stalk or stipe (2.97 ± 0.56). The moisture content had a marked influence on the conversion of ergosterol to vitamin D₂, the best conversion taking place at a moisture content of about 70% on a wet basis.     

Querying distributed multimedia databases and data sources for sensor data fusion

Sensor data fusion imposes a number of novel requirements on query languages and query processing techniques. A spatial/temporal query language called /spl Sigma/QL has been proposed to support the retrieval and fusion of multimedia information from multiple sources and databases. In this paper we investigate fusion techniques, multimedia data transformations and /spl Sigma/QL query processing techniques for sensor data fusion. Fusion techniques including fusion by the merge operation, the detection of moving objects, and the incorporation of belief values, have been developed. An experimental prototype has been implemented and tested to demonstrate the feasibility of these techniques.     

Web service conversation modeling: a cornerstone for e-business automation

Web services are emerging as a promising technology for effectively automating interorganizational interactions. However, despite the growing interest, several issues remain to be addressed to provide Web services with benefits similar to what traditional middleware brings to intraorganizational application integration. We identify a framework that builds on current standards to help developers define extended service models and richer Web service abstractions. The framework's main feature is a conversation metamodel derived from our analysis of e-commerce portal sites.