Electrical linewidth test structures fabricated in monocrystallinefilms for reference-material applications

The physical widths of reference features incorporated into electrical linewidth test structures patterned in films of monocrystalline silicon have been determined from Kelvin voltage measurements. The films in which the test structures are patterned are electrically insulated from the bulk-silicon substrate by a layer of silicon dioxide provided by SIMOX (Separation by the IMplantation of OXygen) processing. The motivation is to facilitate the development of linewidth reference materials for critical-dimension (CD) metrology-instrument calibration. The selection of the (110) orientation of the starting silicon and the orientation of the structures' features relative to the crystal lattice enable a lattice-plane-selective etch to generate reference-feature properties of rectangular cross section and atomically planar sidewalls. These properties are highly desirable for CD applications in which feature widths are certified with nanometer-level uncertainty for use by a diverse range of CD instruments. End applications include the development and calibration of new generations of CD instruments directed at controlling processes for manufacturing devices having sub-quarter-micrometer features     

Cholesterol and vascular disease. Study of pravastatin

Variations in lipid profile and incidence of vascular events were evaluated. Group 1 had a 29.3% reduction of total and a 38.3% reduction of LDL cholesterol as against reductions of 9% and 9.6% respectively in group 2. No significant difference was observed between the two groups as far as the vascular events considered were concerned. Pravastatin is an effective and safe drug. The lack of influence on the evolution of vascular disease would appear to be correlated to the small number of subjects studied and the short follow-up.     

Genetic aspects of Crohn disease and ulcerative colitis. Empirical risk of recurrence and case presentation

Nutrient uptake by the hindlimb was investigated utilising the arteriovenous difference technique in 5 Thoroughbred horses fed to maintenance a diet of 100% roughage or 52% oat grain and 48% roughage. Arterial blood was obtained from a catheter inserted into the carotid artery while venous blood was simultaneously collected from a catheter placed into the iliac vein via the medial saphenous vein. The arteriovenous difference for glucose was significant and represented a mean extraction of 10 +/- 1% with no effect of diet. If fully oxidised, glucose uptake (corrected for lactate and pyruvate arteriovenous difference) was sufficient to account for 78 +/- 13% or 107 +/- 15% of the oxygen consumed by the hindlimb in horses fed a roughage or 52% oat grain diet respectively. Acetate was also a major metabolite of the hindlimb, showing a 39 +/- 5% extraction with no effect of diet. However, the 52% oat grain diet did induce a significant decline in the concentration of acetate in arterial blood. The potential contribution to oxidation in the hindlimb was significantly reduced from 32 +/- 4% in horses fed roughage to 21 +/- 3% when fed 52% oat grain. D-3-Hydroxybutyrate uptake could account for 9 +/- 1% of the oxidation by the hindlimb with no effect of diet. The technique for measuring nutrient uptake across the hindlimb using the arteriovenous difference is relatively simple and would be valuable in investigating fuel use by muscle during exercise.     

Effect of Freezer Programs on Real-Time Storage Results of Dissolution Profiles

Carstensen and Rhodes¹ have suggested that when, in stability programs, assays cannot be performed immediately after the protocol-designated storage time, then freezing them until such a time when assays can be performed would be a reasonable manner to retain the protocol schedule. They caution, however, that such a procedure may not be valid for dissolution data. The article to follow deals with real-time data showing that such a process is feasible for Nalidixic Acid tablets (and presumably for other tablets as well), and that, furthermore, the dissolution pattern would seem to be “frozen” as well.     

Monitoring systems and determination of actual fatigue usage

At GKN, fatigue monitoring of important components has been conducted since 1979. The monitoring methods depend on the mechanisms of damage; quasi-static loads are regarded as well as dynamic loads. The components were selected for monitoring on the basis of a system analysis. The data resulting from monitoring are used to optimise operation mode steadily. Experience shows that the use of monitoring data as input for fatigue assessment is the most realistic and cost-effective way. This fatigue assessment uses global and local sensitivity studies to evaluate the load-stress relation for each component. These relations can be programmed to produce stress vs. time curves. These are processed according to ASME rules to give a realistic fatigue usage.     

Nitric oxide reduction and carbon monoxide oxidation over carbon-supported copper-chromium catalysts

Carbon supported copper-chromium catalysts are shown to be very active for both the reduction of nitric oxide with carbon monoxide and the oxidation of carbon monoxide with oxygen. Mixed copper-chromium oxide active phases have good activity in the simultaneous removal of nitric oxide and carbon monoxide from exhaust gases. The influence of several catalyst variables has been investigated. The activity per volume of catalyst increases with increasing loading, while the intrinsic activity shows a maximum around C/M=100−50. An optimum catalyst for nitric oxide reduction and carbon monoxide oxidation has a copper/chromium ratio of 2/1. The apparent activation energy for the carbon monoxide oxidation over carbon supported copper-chromium catalysts is 77 kJ/mol, suggesting that the Cu---O bond rupture is the rate-limiting process. The reduction of nitric oxide takes place at higher temperatures. Since all catalysts have a low selectivity for molecular nitrogen formation at lower temperatures, the dissociation of nitric oxide is probably rate determining, resulting in a slightly reduced catalyst system. In an excess of carbon monoxide the reaction is first-order in nitric oxide and zero-order in carbon monoxide. Moisture inhibits the reaction by reversible competitive adsorption, whereas carbon dioxide does not. Oxygen completely inhibits the reduction of nitric oxide due to the more rapid reoxidation of the catalytic sites compared to nitric oxide. Therefore, the reduction of nitric oxide takes place only when all oxygen has been converted and, hence, is shifted to higher temperatures. As a possible consequence, the production of nitrous oxide is reduced. Nitric oxide and molecular oxygen react preferentially with carbon monoxide, so, in an excess of oxidizing component, gasification of the carbon support occurs at higher temperatures after carbon monoxide has been completely consumed.