高强聚烯烃静态断裂过程银纹区的性能1.HDPE

为了观察分析高密度聚乙烯(HDPE)的银纹区性能,对两种HDPE全切痕试样分别进行了速率为0.1 mm/min,0.5 mm/min,1 mm/min,5 mm/min,20 mm/min和50 mm/min的拉伸测试。基于对静态断裂过程应力-位移数据的分析处理,结果表明,HDPE的屈服应力随着拉伸速率增大;高应力时两种HDPE均存在常临界位移控制其银纹断裂;HDPE2480银纹微纤的稳定性较大,材料韧性较好。HDPE静态拉伸断面显微结构显示,HDPE2480的银纹微纤尺寸大于HDPE4801,导致两者断面弧形巢尺寸和弧形巢内粗糙度的不同。     

数字波形记录仪测量控制系统研究

针对目前数字波形记录仪校准现状,利用多型标准可程控标准仪器搭建了自动测量控制系统,在VB6.0平台的基础上,开发了基于VISA COM函数库的自动测量软件。提出了"方案测试"的软件设计思想,将需要校准的功能或参数、设备的控制信息和校准点设置等编辑成测量控制方案,从而实现了测试的极大灵活性,在校准不同型号的数字波形记录仪时,无需改动软件平台就能达到测试目标。为开展此类仪器的自动校准提供了参考方法。     

采煤机大功率截割部加载试验的方法

介绍了采煤机大功率截割部加载试验的一种新的实现方法,同时阐述了加载试验的工作原理、主要组成部分和主要技术特点。     

合理选择施工方案修复采区煤仓

文章针对潘一矿采区煤仓损坏严重、修复难度大、工期紧的特点,认真选择方案,合理安排工序,采用顺序作业与平行作业相结合,成功地在规定检修期内完成煤仓修复和堵水任务。     

Image coding quality assessment using fuzzy integrals with a three-component image model

Based on importance measures and fuzzy integrals, a new assessment method for image coding quality is presented in this paper. The proposed assessment is based on two subevaluations. In the first subevaluation, errors on edges, textures, and flat regions are computed individually. The errors are then assessed using an assessment function. A global evaluation with Sugeno fuzzy integral is then obtained based on the importance measure of edge, texture, and flat region. In the second subevaluation, an importance measure is first established depending on the types of regions where errors occur, a subtle evaluation is then obtained using Sugeno fuzzy integral on all pixels of the image. A final evaluation is obtained based on the two subevaluations. Experimental results show that this new image quality assessment closely approximates human subjective tests such as mean opinion score with a high correlation coefficient of 0.963, which is a significant improvement over peak signal-to-noise ratio, picture quality scale, and weighted mean square error, three other image coding quality assessment methods, which have the correlation coefficients of 0.821, 0.875, and 0.716, respectively.     

企业文化建设与实践研究——以湖北白莲河抽水蓄能有限公司为例

在白莲河抽水蓄能电站建设中,重视企业文化建设来提高员工综合素质和凝聚力,促使企业各种要素和谐发展,取得了高的效益。     

压缩机厂房桥式起重机选型浅析

从工作环境、起升高度、额定起重量、工作级别、运行速度、跨度等方面论述了桥式起重机选型的国家标准、行业标准和运行参数;从起重机行程、操作方式和导电方式论述了桥式起重机的吊装方式以及吊装操作注意事项。     

Structure evolution,dielectric,and conductivity behavior of(K0.5Na0.5)NbO3-Bi(Zn2/3Nb1/3)O3 ceramics

(1-x)K0.5Na0.5NbO3-xBi(Zn2/3Nb1/3)O3 ((1-x)KNN-xBZN,x =0.010,0.015,0.020,0.025,and 0.030) lead-free ceramics were fabricated via a traditional solid-state metho...     

Investigation on the Transient Thermal Performance of a Mini-Channel Cold Plate for Battery Thermal Management

Cold plate is an important component for a liquid battery thermal management system.In order to study the transient thermal performance of the cold plate under ...     

Effects of Optimized Operating Parameters on Combustion Characteristics and NO_x Emissions of a Burner based on Orthogonal Analysis

To optimize the structure of the burner,improve the combustion performance,and reduce the emission of NO_x,a self-circulating low NO_x combustion technology was used to design a new type of flue gas self-circulating low NO_x burner.Based on previous research on the numerical model of combustion and the composition of mixed gas on combustion and NO_x emissions,the effect of various factors on the ejection coefficient of the flue gas self-circulating structure was analyzed using the orthogonal test method,and the burner operating parameters,such as preheating temperature and excess air coefficient,were deeply studied through the three-dimensional finite element numerical model in this paper.The results show that the diameter ratio of the nozzle and the length of the cylindrical section of the flue gas self-circulating structure have great influence on its ejection and mixing ability.The optimal ejection coefficient was 0.4829.Overall,the amount of NO_x emissions greatly increased from 6.23×10~(-6) (volume fraction) at the preheating temperature 973 K to 3.5×10~(-3) at preheating temperature 1573 K.When the excess air coefficient decreased from 1.2 to 1,the maximum combustion temperature decreased from 2036.3 K to 1954.22 K,and the NO_x emissions decreased from 352.29×10~(-6) to 159.73×10~(-6).