DAWL: A Delayed-ACK Scheme for MAC-Level Performance Enhancement of Wireless LANs

The IEEE 802.11 MAC protocol provides a reliable link layer using Stop & Wait ARQ. The cost for high reliability is the overhead due to acknowledgement packets in the direction opposite to the actual data flow. In this paper, the design of a new protocol as an enhancement of IEEE 802.11 is proposed, with the aim of reducing supplementary traffic overhead and increasing the bandwidth available for actual data transmission. The performance of the proposed protocol is evaluated through comparison with IEEE 802.11 as well as with a SSCOP-based protocol. Results underline significant advantages of the proposed protocol against existing ones, thus confirming the value and potentiality of the approach.Dzmitry Kliazovich received his Masters degree in telecommunication science from Belarusian State University of Informatics and Radioelectronics in 2002. He is currently working towards the Ph.D. degree in University of Trento, Italy. His main research interest lies in wireless networking field with a focus on performance optimization and cross-layer design.Fabrizio Granelli was born in Genoa in 1972. He received the “Laurea” (M.Sc.) degree in Electronic Engineering from the University of Genoa, Italy, in 1997, with a thesis on video coding, awarded with the TELECOM Italy prize, and the Ph.D. degree in Electronic Engineering and Computer Science from the same university in 2001. Since 2000 he is carrying on his teaching activity as Assistant Professor at the Dept. of Information and Communication Technologies (DIT) of the University of Trento (Italy) within the B.Sc. and M.Sc. Degrees in Telecommunications Engineering.The research interests of Dr. Granelli are mainly focused on networking, with particular attention to network modeling and performance evaluation, wireless networks, access control, and next-generation telecommunication networks.He is author of more than 30 refereed papers, published in several international journals and conferences.Dr. Granelli is member of the IEEE Committee on “Communication Systems Integration and Modeling” (CSIM) and of the Technical Programme Committee of the “QoS and Performance Evaluation Symposium” of the International Conference on Communications (ICC 2003 and ICC 2004).     

Effect of Synthesis and Sintering Conditions on the Thermoelectric Properties of n-Doped Mg2Si

Magnesium silicide (Mg₂Si)-based alloys are promising candidates for thermoelectric (TE) energy conversion in the middle–high temperature range. The detrimental effect of the presence of MgO on the TE properties of Mg₂Si based materials is widely known. For this reason, the conditions used for synthesis and sintering were optimized to limit oxygen contamination. The effect of Bi doping on the TE performance of dense Mg₂Si materials was also investigated. Synthesis was performed by ball milling in an inert atmosphere starting from commercial Mg₂Si powder and Bi powder. The samples were consolidated, by spark plasma sintering, to a density >95%. The morphology, and the composition and crystal structure of samples were characterized by field-emission scanning electronic microscopy and x-ray diffraction, respectively. Moreover, determination of Seebeck coefficients and measurement of electrical and thermal conductivity were performed for all the samples. Mg₂Si with 0.1 mol% Bi doping had a ZT value of 0.81, indicative of the potential of this method for fabrication of n-type bulk material with good TE performance.     

An Adaptive Control System to Deliver Interactive Virtual Environment Content to Handheld Devices

Wireless communication advances have enabled emerging video streaming applications to mobile handheld devices. For example, it is possible to display and interact with complex 3D virtual environments on mobile devices that don’t have enough computational and storage capabilities (e.g. smart phones, PDAs) through remote rendering techniques, where a server renders 3D data and streams the corresponding image flow to the client. However, due to fluctuations in bandwidth characteristics and limited mobile device CPU capabilities, it is extremely challenging to design effective systems for streaming interactive multimedia over wireless networks. This paper presents a novel approach based on a controller that can automatically adjust streaming parameters basing on feedback measures from the client device. Experimental results prove the effectiveness of the proposed solution in coping with bandwidth changes, thus providing high Quality of Service (QoS) in remote visualizations.     

Double actuation architectures for rendering variable impedance in compliant robots: A review

Novel compliant actuation systems have been developed in recent years for a variety of possible advantages, such as establishing a safe human–robot interaction, increasing energy efficiency, reducing the effects of impacts and even for the development of neuro-inspired robotic platforms to be used in human motor control studies.In this rapidly growing and transversal research field, systems involving more than one active element (typically motors) for each actuated degree of freedom are being investigated to allow separate position and impedance regulations. Considering the wide range of applications and the large number of different arrangements deriving from the combination of two active elements and passive elastic components, several actuation architectures have been devised.This paper reviews state-of-the-art rotary variable impedance units incorporating two separate motors. Existing devices are grouped in three main categories. A critical and comparative analysis of the most relevant features is carried out, also based on most representative prototypes. Recently proposed methodologies and evaluation criteria for design optimization are illustrated and perspectives on potential applications of double actuation systems are presented.     

Healing DNA Self-Assemblies Using Punctures

In self-assembly, individual components (commonly referred to as tiles) have sufficient infor mation to build templates for structures such as lat tices for two-dimensional scaffolds. Tile sets that can heal (fully or partially) an erroneous DNA assembly have been proposed. Healing requires growth to be restarted such that erroneous tiles can be removed and the correct tiles can bind to the aggregate. Punctures have been proposed for this purpose; in this paper, a puncture is intentionally induced in the self-assembly to restart the growth process. The goal of this paper is to characterize an intentionally induced puncture (and its relevant properties) on an erroneous tile site in the grown crystal as part of a healing process. This allows to propagate any newly generated error away from the source of growth (i.e. the seed tile), such that self-assembly can continue along specific directions. Different types of puncture are considered with respect to healing and related features, such as growth direction, error and aggregate types. Punctures are analyzed using a new characterization and metric; different tile sets are investigated in detail for healing of a DNA self-assembly.

Fracture toughness characterisation of a glass fibre‐reinforced plastic composite

By examining the state of the art, it can be realised that few research works have been done on the fracture behaviour of plastic composites reinforced with continuous glass fibres. Therefore, the present paper deals with the fracture toughness of a unidirectional glass fibre‐reinforced plastic (GFRP), such a parameter being analytically determined by means of the modified two‐parameter model (MTPM). The input data of the MTPM are obtained from an experimental campaign related to three‐point bending tests on single edge‐notched specimens characterised by different sizes. The novelty of this research work is that the MTPM, originally proposed for isotropic materials, is here employed to estimate the fracture toughness of GFRPs characterised by orthotropic mechanical properties.     

Porcine Small Intestinal Submucosa (SIS) as a Suitable Scaffold for the Creation of a Tissue-Engineered Urinary Conduit: Decellularization,Biomechanical and Biocompatibility Characterization Using New Approaches

Bladder cancer (BC) is among the most common malignancies in the world and a relevant cause of cancer mortality. BC is one of the most frequent causes for bladder removal through radical cystectomy, the gold-standard treatment for localized muscle-invasive and some cases of high-risk, non-muscle-invasive bladder cancer. In order to restore urinary functionality, an autologous intestinal segment has to be used to create a urinary diversion. However, several complications are associated with bowel-tract removal, affecting patients’ quality of life. The present study project aims to develop a bio-engineered material to simplify this surgical procedure, avoiding related surgical complications and improving patients’ quality of life. The main novelty of such a therapeutic approach is the decellularization of a porcine small intestinal submucosa (SIS) conduit to replace the autologous intestinal segment currently used as urinary diversion after radical cystectomy, while avoiding an immune rejection. Here, we performed a preliminary evaluation of this acellular product by developing a novel decellularization process based on an environmentally friendly, mild detergent, i.e., Tergitol, to replace the recently declared toxic Triton X-100. Treatment efficacy was evaluated through histology, DNA, hydroxyproline and elastin quantification, mechanical and insufflation tests, two-photon microscopy, FTIR analysis, and cytocompatibility tests. The optimized decellularization protocol is effective in removing cells, including DNA content, from the porcine SIS, while preserving the integrity of the extracellular matrix despite an increase in stiffness. An effective sterilization protocol was found, and cytocompatibility of treated SIS was demonstrated from day 1 to day 7, during which human fibroblasts were able to increase in number and strongly organize along tissue fibres. Taken together, this in vitro study suggests that SIS is a suitable candidate for use in urinary diversions in place of autologous intestinal segments, considering the optimal results of decellularization and cell proliferation. Further efforts should be undertaken in order to improve SIS conduit patency and impermeability to realize a future viable substitute.     

Sustainable Bioactive Packaging Based on Thermoplastic Starch and Microalgae

This study combines the use of corn starch and Tetradesmus obliquus microalgae for the production of antioxidant starch films as flexible packaging material. Starch was plasticized with glycerol and blended with 1 w% polyallylamine chosen as an agent to modify the film physical properties. The addition of polyallylamine improved film water stability and water vapor transmission rate as well as mechanical stiffness and tenacity. The dried Tetradesmus obliquus microalgae, which showed an EC₅₀ value of 2.8 mg/mg DPPH (2.2-Diphenyl-1-picrylhydrazyl radical), was then used as antioxidant filler. The addition of microalgae provided the films with good antioxidant activity, which increased with microalgae content increasing. To our knowledge, this is the first study reporting the development of sustainable bioactive packaging films composed of almost 100% starch, and follows the European union’s goals on plastics strategy concerning the promotion of bio-based, compostable plastics and the setting up of approaches to prevent food waste with a simple plastic packaging.