Synthesis of sulfur-doped carbon nanotubes from sulfur powder using chemical vapor deposition

Sulfur-doped carbon nanotubes (SCNT) with high sulfur contents have been prepared using chemical vapor deposition (CVD) from sulfur powder, acetylene gas and Fe/CaCO₃ (as catalyst). In this regard, various growth's temperatures were examined to investigate its effects on the structure and the sulfur content of prepared SCNT. The best condition was obtained at 700°C and using 4 g of sulfur powder. The product was characterized using FE-SEM and EDS, which showed rode-like SCNT with about 40 nm diameter and 10.75% sulfur content. Moreover, TEM, Raman and XPS analyses were employed to obtain more details related to the product. The XPS results confirmed the presence of sulfur atoms, which covalently incorporated in the carbon framework. Finally, the catalytic ability of the product in oxygen evolution reaction was examined and the results showed high stability and low oxygen production rate for this product.     

Output consensus control of multi-agent systems with nonlinear non-minimum phase dynamics

This paper considers the output consensus problem in non-minimum phase nonlinear multi-agent systems. The main contribution of the paper is to guarantee achieving consensus in the presence of unstable zero dynamics. To achieve this goal, a consensus protocol consisting of two terms is proposed. The first term is a linear function of the states of each agent employed in order to overcome the non-minimum phase dynamics, and the second term is a function of the output of neighbouring agents which provides coupling among agents and guarantees output consensus in the network. The asymptotic stability of output consensus errors and the boundedness of the states of agents are also studied. A numerical example is presented to show the effectiveness of the proposed approach.     

Evaluation of PCL/chitosan electrospun nanofibers for liver tissue engineering

In this investigation, a nanofibrous scaffold was fabricated through electrospinning of polycaprolactone (PCL) and chitosan (CS) using a novel collector to make better orientation and pore size for cell infiltration. PCL/CS nanofibers with 90-rpm collector speed and 40° angle between collector wires of the new collector have fewer diameters with better pore, size and nanofibers orientation. Mechanical properties, roughness parameters, topology, structure, hydrophilicity, and cell growing were considered for liver tissue engineering. The cell culture was done using epithelial liver mouse cells. The developed electrospun PCL/CS scaffold using novel collector would be an excellent matrix for biomedical applications especially liver tissue engineering.     

Remarkable electrocatalytic activity of Ni-nanoparticles on MOF-derived ZrO2-porous carbon/reduced graphene oxide towards methanol oxidation

In the present work, a porous carbonaceous platform containing zirconium oxide was used for spreading Ni nanoparticles, and applied to methanol oxidation. The platform was obtained by calcination of a metal-organic framework (MOF) attached to graphene oxide. Nickel nanoparticles were then deposited on the nanocomposite by chemical reduction from a Ni²⁺ solution. The obtained electrocatalyst was characterized by different methods. An excellent electrocatalytic behavior was observed towards methanol oxidation in alkaline medium (j ~ 240 mA cm^?2 or ~ 626 mA mg^?1 in 1.0 M methanol). The results of methanol oxidation by various electrochemical studies (cyclic voltammetry, electrochemical impedance spectroscopy, chronoamperometry and chronopotentiometry) revealed the effective synergy between reduced graphene oxide, porous carbon material, ZrO₂ metal oxide and Ni nanoparticles. Good durability and stability of the proposed electrocatalyst and significantly increased current density of methanol oxidation suggest it as a potential alternative for Pt-based electrocatalysts in direct methanol fuel cells.     

Optimal replacement policy and inspection interval for condition-based maintenance

In condition-based maintenance (CBM), replacement policy is often defined as a rule for replacement or leaving an item (or a system) in operation until the next inspection, depending on monitoring results. The criterion for determining the optimal threshold for replacement, also known as optimal control limit, is to minimise the average maintenance costs per unit time due to preventive and failure replacements over a long time horizon. On the one hand, higher frequency of inspections provides more information about the condition of the system and, thus, maintenance actions are performed more effectively, namely, unnecessary preventive replacements are avoided and the number of replacements due to failure is reduced. Consequently, the cost associated to failure and preventive replacements are decreased. On the other hand, in many real cases, inspections require labour, specific test devices, and sometimes suspension of the operations and, thus, as the number of inspections increase, the inspection cost also increases. In this paper, preventive and failure replacement costs as well as inspection cost are taken into account to determine the optimal control limit and the optimal inspection interval simultaneously. The proposed approach is illustrated through a numerical example.     

Synthesis of polypropylene/clay nanocomposites using bisupported Ziegler‐Natta catalyst

In this article, preparation of polypropylene/clay nanocomposites (PPCNC) via in situ polymerization is investigated. MgCl₂/montmorillonite bisupported Ziegler‐Natta catalyst was used to prepare PPCNC samples. Montmorillonite (MMT) was used as an inert support and reinforcement agent. The nanostructure of the composites was characterized by X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy techniques. Obtained results showed that silica layers of the MMT in these PPCNC were intercalated, partially exfoliated, and uniformly dispersed in the polypropylene matrix. Thermogravimetric analysis showed good thermal stability for the prepared PPCNC. Differential scanning calorimetric was used to investigate both melting and crystallization temperatures, as well as the crystallinity of the PPCNC samples. Results of permeability analysis showed significant increase in barrier properties of PPCNC films. Effective parameters on molecular weight and flow ability of produced samples such as Al/Ti molar ratio and H₂ concentration were also investigated. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Engineering Climate-Change-Resilient Crops: New Tools and Approaches

Environmental adversities, particularly drought and nutrient limitation, are among the major causes of crop losses worldwide. Due to the rapid increase of the world’s population, there is an urgent need to combine knowledge of plant science with innovative applications in agriculture to protect plant growth and thus enhance crop yield. In recent decades, engineering strategies have been successfully developed with the aim to improve growth and stress tolerance in plants. Most strategies applied so far have relied on transgenic approaches and/or chemical treatments. However, to cope with rapid climate change and the need to secure sustainable agriculture and biomass production, innovative approaches need to be developed to effectively meet these challenges and demands. In this review, we summarize recent and advanced strategies that involve the use of plant-related cyanobacterial proteins, macro- and micronutrient management, nutrient-coated nanoparticles, and phytopathogenic organisms, all of which offer promise as protective resources to shield plants from climate challenges and to boost stress tolerance in crops.