Driving Mechanisms of Delamination Related Reliability Problems in Exposed Pad Packages

Exposed pad packages were introduced in the late 1980s and early 1990s because of their excellent thermal and electrical performance. Despite these advantages, the exposed pad packages experience a lot of thermo-hygro-mechanical related reliability problems during qualification and testing. Examples are die lift, which occurs predominantly after moisture sensitivity level conditions, and die-attach to leadframe delamination leading to downbond stitch breaks during temperature cycling. In this chapter, nonlinear finite element (FE) models using fracture mechanics based J-integral calculations are used to assess the reliability problems of the exposed pad package family. Using the parametric FE models any geometrical and material effects can be explored to their impact on the occurrence diepad delamination, and dielift. For instance the impact of diepad size is found to be of much less importance as the impact of die thickness is. Using the fracture mechanics approach, the starting location for the delamination from thermo-hygro-mechanical point of view is deducted. The results indicate that when diepad delamination is present, cracks are likely to grow beneath the die and dielift will occur. The interaction between dielift and other failure modes, such as lifted ball bonds, are not found to be very significant. The FE models are combined with simulation-based optimization methods to deduct design guidelines for optimal reliability of the exposed pad family.     

Optimal transfer trees and distinguishing trees for testing observable nondeterministic finite-state machines

The fault-state detection approach for blackbox testing consists of two phases. The first is to bring the system under test (SUT) from its initial state to a targeted state t and the second is to check various specified properties of the SUT at t. This paper investigates the first phase for testing systems specified as observable nondeterministic finite-state machines with probabilistic and weighted transitions. This phase involves two steps. The first step transfers the SUT to some state t' and the second step identifies whether t' is indeed the targeted state t or not. State transfer is achieved by moving the SUT along one of the paths of a transfer tree (TT) and state identification is realized by using diagnosis trees (DT). A theoretical foundation for the existence and characterization of TT and DT with minimum weighted height or minimum average weight is presented. Algorithms for their computation are proposed.     

β″－Al_2O_3陶瓷的强化和韧化

研究了稳定ＺｒＯ＿２和部份稳定ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的强化和韧化作用，观察了不同种类、不同含量的ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的显微结构、力学性能和电导率的影响，探讨了β″－Ａｌ＿２Ｏ＿３的韧化机理。     

电子表格EXCEL5.0在选煤线性规划问题中的应用

采用电子表格软件ＥＸＣＥＬ５．０可以方便地解决许多选煤生产中的线性规划问题。本文通过选煤过程线性规划实例介绍ＥＸＣＥＬ５．０在此领域的应用方法。     

粉尘薄膜爆轰

与普通爆轰不同，粉尘薄膜爆轰波前氧化剂与燃料处于分离状态．由于激波作用下壁面燃料的注入才于壁面附近形成燃烧的粉尘云，燃烧释放的热使激波自持形成粉尘薄膜爆轰。本文在长2、8m，横截面20mm×20mm的方型水平激波管中对此类爆轰进行了实验研究．并根据作者建立的模型对其二维结构进行了数值模拟。     

Oxygen absorption kinetics in YBa2Cu3Ox

The oxygen absorption process in highly aligned YBa₂Cu₃O_x samples in air and in pure oxygen was studied at several constant temperatures. The process can be expressed in two steps, a chemical reaction controlled step and a diffusion controlled step. The kinetic equations are as follows respectively:

(1 − a_t) ln(1 − a_t) + a_t = k_Dt

The activation energy was calculated using an Arrhenius equation. The technical conditions of heat treatment for oxygen absorption of highly aligned YBa₂Cu₃O_x crystals are discussed.     

强度调制／直接检测（IM／DD）光纤通信系统色散限制的研究

通过引入归一化脉宽Ｐ和相对脉冲展宽因子ｑ，提出了一个适用于ＩＭ／ＤＤ系统中各种眼图恶化量ｘ和归一化脉宽Ｐ的色散限制改进公式。通过与其它理论的比较、计算机仿真和对实验数据的分析，验证了该公式的正确性，并给出了其它结果的限制条件。研究表明：当眼图恶化量ｘ为１ｄＢ左右时，对２．５Ｇｂ／；外调制信号（α＝０）而言，非色散位移光纤ＩＭ／ＤＤ系统的色散因子γ约等于０．７９，所对应的系统再生中继距离约为９００余公里。     

一种新型的节能空调装置--介绍复合末端机组(FC+UWSHP)与空气热源热泵冷/热水机组(ASHP)合并运行的系统

本文所介绍的新型空调系统是一种想法很巧妙的节能空调系统。它由单元式水热源热泵机组(ＵｎｉｔａｒｙＷａｔｅｒＳｏｕｒｃｅＨｅａｔＰｕｍｐ)与风机盘管二者组合而成的末端装置和空气热源热泵冷 /热水机组、蓄热槽等构成。本系统由高砂热学公司开发 ,已完成这方面的实验验证 ,并在东京电力公司的暖通空调技术展示中心展出。经过进一步的技术完善以后 ,可以成为一种有竞争力的空调系统。1　单元式水热源热泵机组 (ＵＷＳＨＰ)的原理单元式水热源热泵是一种房间空调器。可做成窗台下立式和吊顶式 (图 1 )等。它是一种整体型机组 ,制冷机在…     

多时滞Lotka-Volterra互惠系统周期正解的存在性

用重合度理论研究具时滞非自治Lotka-Volterra互惠系统，获得了周期正解的存在性，推广了Gopalsamy及He(1997)的结果。     

聚苯乙烯溴代并接技聚二甲基硅氧烷

聚苯乙烯（PS）在苯溶液中与溴代丁二酰亚胺（NBS）反应，经分离提纯得到了固体溴代聚苯乙烯（PSB）。将所得PSB溶于苯并与低分子量的聚二甲基硅氧烷硅醇锂（PDMSOLi）反应，经分离提纯得到固体的溴代聚苯乙烯接枝聚二甲基硅氧烷（PSB－g-PDMSO),所得PSB-g-PDMSO的结构经^1H-NMR、IR及TEM表征。