A comparative study on citrate sol-gel and combustion synthesis methods of CoAl2O4 spinel

CoAl₂O₄ spinel was successfully synthesized by combustion synthesis method using glycine and urea by 1:1 molar ratio as fuels and sol-gel process using citric acid as a chelating agent. The as-synthesized powders were calcined at desired temperatures to obtain CoAl₂O₄ spinel as a single phase. X-ray diffraction, thermogravimetric, and differential thermal analysis results revealed that the formation of CoAl₂O₄ spinel in combustion method needs 300°C higher temperatures than those of sol-gel. Scanning electron microscopy and transmission electron microscopy analysis results revealed that “sol-gel spinel” had nanometric particle size which was smaller than those of “combustion spinel.” Temperature programed reduction with hydrogen and Fourier transform infrared spectroscopy results declared that there was a little residual cobalt oxide in combustion spinel while there is no oxide resided in “sol-gel spinel.” Consequently, the sol-gel method has more benefit in synthesizing spinel with sulfate precursors than combustion.     

Agitation of Herschel–Bulkley fluids with the Scaba–anchor coaxial mixers

The design of the coaxial mixers depends on many interrelated parameters including the geometry and dimensions of the mixing vessel, the location and type of the impellers, speed ratio, impeller diameter, rotation mode, and fluid rheology. No study has been reported in the literature regarding the mixing performance of the coaxial mixers in the agitation of yield-pseudoplastic fluids. Thus, the main objective of this study was to evaluate the performance of a Scaba–anchor coaxial mixer (a novel configuration) in the mixing of xanthan gum solutions (yield-pseudoplastic fluids). The Herschel–Bulkley model was used to describe the rheological behavior of the xanthan gum solutions. To develop new correlations for the generalized Reynolds and power numbers of the coaxial mixers employed in the agitation of this class of non-Newtonian fluids, we utilized numerous experimental and computational fluid dynamics (CFD) data. The new correlations were tested successfully at different operating conditions (e.g. speed ratio, fluid rheology, and operation mode).     

Characterization of the continuous-flow mixing of non-Newtonian fluids using the ratio of residence time to batch mixing time

Continuous-flow mixing of pseudoplastic fluids possessing yield stress is a complex phenomenon exhibiting non-ideal flows within the stirred vessels. Electrical resistance tomography (ERT), a non-intrusive technique, was employed to measure the mixing time in the batch mode while dynamic tests were performed to study the mixing system in the continuous mode. This study attempts to explore the effects of the operating conditions and design parameters on the ratio of the residence time (τ) to the mixing time (θ) for the continuous-flow mixing of non-Newtonian fluids. To achieve these objectives, the effects of impeller types (four axial-flow impellers: A310, A315, 3AH, and 3AM; and three radial-flow impellers: RSB, RT, and Scaba), impeller speed (290–754 rpm), fluid rheology (0.5–1.5%, w/v), impeller off-bottom clearance (H/2.7–H/2.1, where H is the fluid height in the vessel), locations of inlet and outlet (configurations: top inlet-bottom outlet and bottom inlet-top outlet), pumping directions of an axial-flow impeller (up-pumping and down-pumping), fluid height in the vessel (T/1.06–T/0.83, where T is the tank diameter), residence time (257–328 s), and jet velocity (0.317–1.66 ms⁻¹) on the ratio of τ to θ were investigated. The results showed that the extent of the non-ideal flows (channeling and dead volume) in the continuous-flow mixing approached zero when the value of τ/θ varied from 8.2 to 24.5 depending on the operating conditions and design parameters. Thus, to design an efficient continuous-flow mixing system for non-Newtonian fluids, the ratio of the residence time to the mixing time should be at least 8.2 or higher.     

Fe3O4@MCM-41@NH-SO3H: an Efficient Magnetically Reusable Nano-Catalyst for the Formylation of Amines and Alcohols

Silicon - In this article the preparation of Fe3O4@MCM-41@NH-SO3H, a new sulfonated magnetic mesoporous nanocomposite, is reported. The introduced catalyst is structurally based on MCM-41 as the...     

Multiple Abiotic Stresses Applied Simultaneously Elicit Distinct Responses in Two Contrasting Rice Cultivars

Rice crops are often subject to multiple abiotic stresses simultaneously in both natural and cultivated environments, resulting in yield reductions beyond those expected from single stress. We report physiological changes after a 4 day exposure to combined drought, salt and extreme temperature treatments, following a 2 day salinity pre-treatment in two rice genotypes—Nipponbare (a paddy rice) and IAC1131 (an upland landrace). Stomata closed after two days of combined stresses, causing intercellular CO2 concentrations and assimilation rates to diminish rapidly. Abscisic acid (ABA) levels increased at least five-fold but did not differ significantly between the genotypes. Tandem Mass Tag isotopic labelling quantitative proteomics revealed 6215 reproducibly identified proteins in mature leaves across the two genotypes and three time points (0, 2 and 4 days of stress). Of these, 987 were differentially expressed due to stress (cf. control plants), including 41 proteins that changed significantly in abundance in all stressed plants. Heat shock proteins, late embryogenesis abundant proteins and photosynthesis-related proteins were consistently responsive to stress in both Nipponbare and IAC1131. Remarkably, even after 2 days of stress there were almost six times fewer proteins differentially expressed in IAC1131 than Nipponbare. This contrast in the translational response to multiple stresses is consistent with the known tolerance of IAC1131 to dryland conditions.     

Synthesis and characterization of poly(ethylene tetrasulfide)/graphene oxide nanocomposites by in situ polymerization method

Poly(ethylene tetrasulfide) (PSP) is synthesized via interfacial polycondensation of 1,2 dichloroethane and sodium tetrasulfide, in the presence of graphene oxide (GO). This process resulted in homogeneously dispersed PSP/GO nanocomposites. Nanocomposites of 0.3 and 0.5?wt% of GO are synthesized and their morphology, chemical characteristics behavior are studied employing field emission scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction techniques. Thermal characterization of composites is performed by differential scanning calorimetry and thermogravimetry analysis. Results indicate that the addition of only small amounts (0.5?wt%) of well-dispersed GO can increase the melting point more than 16°C resulting in better thermal properties for the composite. The solubility of nanocomposite is also studied and results show that the solubility depends on solvent concentration in addition to reinforcement (GO) deals.     

Mathematical Modeling of Coke Formation and Deposition due to Thermal Cracking of Petroleum Fluids

A two‐dimensional mathematical dynamics model is presented to predict coke formation due to thermal cracking inside the tubes of fired heaters on two types of petroleum fluid. The laminar and turbulent flows are analyzed for both petroleum fluids. The second‐order k‐? standard model is adopted to make this mathematical model more accurate than previous models of coke formation. The radial and axial variations for temperature, velocity, and concentration due to the high temperature gradients inside the tubes are considered in the model equations. The finite volume method is the numerical model used to discretize the conservation equations. The proposed model is suitable to predict coke formation inside heater tubes since it indicates operational conditions where coke formation is minimized.     

Optimization of hole-making operations: a tabu-search approach

This paper reports a tabu-search approach to minimize the total processing cost for hole-making operations. Four issues, namely, tool travel scheduling, tool switch scheduling, tool selection, and machining speed specification have been simultaneously addressed in this study. The total processing cost consists of tooling cost, machining cost, non-productive tool travelling cost, and tool switching cost. This problem has a structure similar to the Travelling Salesman Problem (TSP) and hence is NP-complete. In addition, the problem under consideration is more complex since the cost associated with each operation is both sequence-dependent and position-dependent. To provide an efficient solution procedure, a tabu search approach is used. To improve the search performance two new neighbourhood generation and move selection policies have been proposed and tested. The decisions on the above issues can be made simultaneously based on the output of the proposed algorithm. The results obtained from computational experiments show that the total processing cost can be significantly reduced within a reasonable search time. The effects of some search parameters and diversification strategies on the search performance have also been investigated.     

Study of crystal structure of (polyvinylidene fluoride/clay) nanocomposite films: Effect of process conditions and clay type

Three Polyvinylidene fluoride (PVDF) different in molecular structure were used to produce nanocomposities films by cast extrusion with a particular emphasis on maximizing the β crystal phase content. The PVDF/clay compounding followed by cast film production was carried out through melt extrusion using a twin screw extruder equipped with a slit die. X‐ray diffraction (XRD) results showed that clay melt intercalation is almost similar for all three PVDFs. The XRD results also revealed that nanocomposite films from PVDF with branched chain structure (PVDFB) generated the greatest amount of β phase. FTIR spectroscopy measurements confirmed the XRD results but also revealed that significant stretching of the melt films at the die or rapid cooling would adversely affect the formation of β phase. The amount of β phase obtained based on nanoclay compounding was compared with that obtained from conventional method: stretching of molded PVDF film with initial α phase. Stretching of PVDF film at 60°C yielded pure β phase that means complete transformation of α to β. From mechanical properties, tensile tests were carried out on PVDF nanocomposite films to evaluate mechanical strength. PVDF with low molecular weight exhibited a very low strain at break while branched PVDF and high molecular weight PVDF could sustain more strain. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers