Design of bandpass–bandpass diplexers using rectangular-, T-, and L-shaped resonators for hybrid power amplifier and 5G applications

Analog Integrated Circuits and Signal Processing - In this paper, two bandpass–bandpass diplexers, based on L-, T- and rectangular-shaped resonators are designed and analyzed, which are used...     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

Introduction

The Journal of Supercomputing -     

Photographing impact of molten molybdenum particles in a plasma spray

Plasma-sprayed molten molybdenum particles (∼40 μm in diameter) were photographed impinging at high velocity (∼140 m/s) on a glass substrate at room temperature. An optical sensor detected thermal radiation emitted by a droplet as it approached the substrate and activated a time delay unit. After a selected time interval, an Nd:YAG laser was triggered, emitting a 5 ns pulse that provided illumination for a charge-coupled device (CCD) camera to photograph the impacting droplet through a long-range microscope. By varying the delay before pulsing the laser, different stages of droplet deformation were recorded. Impacting droplets spread into a thin circular film that ruptured and broke into small fragments. An optical detector recording thermal radiation from the impacting droplet gave a signal that increased as the droplet spread out, reached a maximum when the liquid film began to rupture, and decreased as portions of the droplet recoiled because of surface tension and then flew out of view of the photodetector.     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

X-ray Photoelectron Spectroscopy of Cadmium Tin Oxide Ceramics in As-Fired and Electrochemically Reduced Forms

X-ray photoelectron spectroscopy (XPS) has been employed to investigate the chemical nature of samples of dicadmium stannate (Cd₂SnO₄) in the as-fired, electrochemically reduced, and reoxidized states. The reduction of Cd₂SnO₄ was found to be associated with a dramatic color change from bright yellow to dark green, a phenomenon commonly known as the electrochromic effect. Both quantitative XPS results and binding energy measurements proved that, upon exposure of the reduced ceramic bodies to air, the Sn²⁺ to Sn⁴⁺ transition readily took place to produce the intermediate compound, Cd₂SnO₃ with divalent tin. Prolonged exposure to the atmosphere did not result in further progress of reoxidation extending to monovalent cadmium. However, complete reoxidation of the reduced samples was possible by annealing in air at 350°C for a short period of time, e.g., 3 h, by which the original features of the as-fired state such as color and electrical conductivity were restored. The results also showed that reoxidized samples at high temperature assume the same XPS characteristics as those of as-fired ceramics.     

EVALUATION OF SURFACE FORCE-PORE FLOW AND MODIFIED SURFACE FORCE-PORE FLOW MODELS FOR REVERSE OSMOSIS TRANSPORT

The surface force-pore flow (SF-PF) model of reverse osmosis transport and the extended and modified form (the MD-SF-PF model) have been employed to predict the performance of four aromatic polyamide (FilmTec, FT30)reverse osmosis membranes. The evaluation is based on a comparison of model predictions with experimental data. Dilute sodium chloride-water solution experimental data were used to estimate model parameters. The models are then used to predict flux and separation at various operating pressures and concentrations. Membrane performance (i.e., separation and permeate flux) can be well predicted by the MD-SF-PF model while the SF-PF model predicts the performance for the sodium chloride system less satisfactorily.     

An architecture framework for an adaptive extensible processor

To improve the performance of embedded processors, an effective technique is collapsing critical computation subgraphs as application-specific instruction set extensions and executing them on custom functional units. The problem with this approach is the immense cost and the long times required to design a new processor for each application. As a solution to this issue, we propose an adaptive extensible processor in which custom instructions (CIs) are generated and added after chip-fabrication. To support this feature, custom functional units are replaced by a reconfigurable matrix of functional units (FUs). A systematic quantitative approach is used for determining the appropriate structure of the reconfigurable functional unit (RFU). We also introduce an integrated framework for generating mappable CIs on the RFU. Using this architecture, performance is improved by up to 1.33, with an average improvement of 1.16, compared to a 4-issue in-order RISC processor. By partitioning the configuration memory, detecting similar/subset CIs and merging small CIs, the size of the configuration memory is reduced by 40%.     

Human-centered design of a wearable kinesthetic haptic device for surgical teleoperation

Artificial Life and Robotics - This paper describes the design and performance evaluation of a flexible wearable haptic device that aims to realize full kinesthetic haptic feedback for application...     

A hybrid OBL-based firefly algorithm with symbiotic organisms search algorithm for solving continuous optimization problems

The metaheuristic optimization algorithms are relatively new optimization algorithms introduced to solve optimization problems in recent years. For example, the firefly algorithm (FA) is one of the metaheuristic algorithms inspired by the fireflies' flashing behavior. However, its weakness in terms of exploration and early convergence has been pointed out. In this paper, two approaches were proposed to improve the FA. In the first proposed approach, a new improved opposition-based learning FA (IOFA) method was presented to accelerate the convergence and improve the FA's exploration capability. In the second proposed approach, a symbiotic organisms search (SOS) algorithm improved the exploration and exploitation of the first approach; two new parameters set these two goals, and the second approach was named IOFASOS. The purpose of the second method is that in the process of the SOS algorithm, the whole population is effective in the IOFA method to find solutions in the early stages of implementation, and with each iteration, fewer solutions are affected in the population. The experiments on 24 standard benchmark functions were conducted, and the first proposed approach showed a better performance in the small and medium dimensions and exhibited a relatively moderate performance in the higher dimensions. In contrast, the second proposed approach was better in increasing dimensions. In general, the empirical results showed that the two new approaches outperform other algorithms in most mathematical benchmarking functions. Thus, The IOFASOS model has more efficient solutions.