转速对6061-T6铝合金搅拌摩擦搭接焊接头力学性能的影响(英文)

采用场发射扫描电子显微镜(FE-SEM),研究转速对厚度为5 mm的6061-T6铝合金搅拌摩擦搭接焊接头的宏观和微观组织、硬度、搭接头剪切性能和失效模式的影响。结果表明:在最低的转速度下,上模板和下模板具有十分相似的硬度分布。采用EDX分析发现,焊核区的断裂面中含有Fe的化合物。     

A review of the photovoltaic industry and its development in Africa

This article presents an overview of the commercialisation experiences of photovoltaics and draws some conclusion from the past and applies them to the future. In particular, the development for this industry in Africa is examined to identify the areas of strength and potential as well as the necessary infrastructure—for production, distribution and installation in order to support its growth. The question of capital requirement versus the efficiency of photovoltaics is highlighted and the reliabilty factor is analysed. As a result of examining the past, three issues seem crucial for the future development of photovoltaics, especially in Africa: (1) technology development; (2) education; (3) finance. These issues are addressed and their interdependence and impact on the use of photovoltaics are explored. The success stories of several photovoltaic companies in Africa, in spite of their problems, can be a source of optimism for the future contribution of this industry to the improved quality of life and economic growth as well as the employment opportunities on this continent. Finally, a method of co-operation between research in photovoltaics at the universities and local industry is proposed as part of the Research and Development (R&D) infrastructure necessary for the technical support of this field.     

Identification of channelling and recirculation parameters of agitated pulp stock chests

This paper describes a mechanism for identifying the dynamics of non-ideal mixing processes. The object is to study two of the non-ideal behaviours of agitated pulp stock chests: recirculation and channelling. An initial continuous-time model, which contains physically relevant parameters, is transformed into its discrete-time counterpart. This transformation introduces some challenging identification problems, as the discrete-time parameters become a non-linear combination of the original continuous-time parameters. A system identification methodology that addresses these challenges is developed and demonstrated by means of computer simulation. The analysis of data collected from experiments on a laboratory scale model of an industrial chest shows the potential of the techniques developed in this paper.     

Constitutive Relationships for Steel Fibre Reinforced Concrete at Elevated Temperatures

Steel fibre reinforced concrete (SFRC) is an advanced cementitious composite where fibres can act as a profitable replacement for diffused reinforcement, like welded steel mesh, especially for thin cross sections. In this case fire becomes a very important condition in the design. Previous experimental research has shown the benefits in fire resistance of steel fibres, when structural elements are bent. The proper understanding of the effects of elevated temperatures on the properties of SFRC is necessary. In this study, constitutive relationships are developed for high-strength FRSC subjected to fire, with the purpose of given that capable modelling and to specify the fire-performance criteria for concrete structures. They are developed for unconfined FRSC specimens that include compressive and tensile strengths, modulus of elasticity, modulus of rupture, strain at peak stress, and compressive stress–strain relationships at elevated temperatures. The proposed relationships at elevated temperature are compared with experimental results. These results are used to establish compressive stress–strain relationships. Further experimental results for tension and the other main parameters at elevated temperature are needed in order to establish well-founded models and to improve the proposed constitutive relationships, which are general, rational, and fit well with the experimental results.     

High Strength Polypropylene Fibre Reinforcement Concrete at High Temperature

Concrete is an inherently brittle material with a relatively low tensile strength compared to compressive strength. Reinforcement with randomly distributed short fibres presents an effective approach to the stabilization of the crack and improving the ductility and tensile strength of concrete. A variety of fibre types, including steel, synthetics, and natural fibres, have been applied to concrete. Polypropylene (PP) fibre reinforcement is considered to be an effective method for improving the shrinkage cracking characteristics, toughness, and impact resistance of concrete materials. Also, the use of PP fibre has been recommended by all of the researchers to reduce and eliminate the risk of the explosive spalling in high strength concrete at elevated temperatures. In this study, constitutive relationships are developed for normal and high-strength PP fibre reinforcement concrete (PPFRC) subjected to high temperatures to provide efficient modelling and specify the fire-performance criteria for concrete structures. They are developed for unconfined PPFRC specimens that include compressive and tensile strengths, elastic modulus, modulus of rupture, strain at peak stress as well as compressive stress–strain relationships at elevated temperatures. The proposed relationships at elevated temperature are compared with experimental results. These results are used to establish more accurate and general compressive stress–strain relationships prediction. Further experimental results for tension and the other main parameters at elevated temperature are needed in order to establish well-founded models and to improve the proposed constitutive relationships, which are general, rational, and fit well with the experimental results.     

Investigation in Mathematical Models of Chloride Diffusion Coefficient in Concrete Exposed to Marine Environment

Degradation of RC （reinforced concrete） in maritime structures has become a worldwide problem due to its excessive costs of maintenance, repair and replacement in addition to its environmental impacts and safety issues. Degradation of both concrete and steel which is the main reason of reduction in the service life of RC structures strongly depends on the diffusion process of moisture and aggressive species. In this paper, the major and popular mathematical models of diffusion process in concrete are surveyed and investigated. Predominantly in these models, the coefficient of chloride diffusion into the concrete is assumed to be constant. Whereas, experimental records indicate that diffusion coefficient is a function of time. Subsequently, data analysis and comparisons between the existing analytical models for predicting the diffusion coefficient with the existing experimental database are carried out in this study. Clearly, these comparisons reveal that there are gaps between the existing mathematical models and previously recorded experimental results. Perhaps, these gaps may be interpreted as influence of the other affecting parameters on the diffusion coefficient such as temperature, aggregate size and relative humidity in addition to the water cement ratio. Accordingly, the existing mathematical models are not adequate enough to predict the diffusion coefficient precisely and further studies need to be performed.     

Performance Evaluation of Cost-Effective Multicast–Unicast Key Management Method

Group key management is one of the key security issues in multicast networks. The main challenge is to provide a secure group key management method which avoids high key update cost in terms of the number of transmitted keys. In order to achieve low key update cost for group key management, most of the existing methods increase their encryption/decryption cycles which requires a strong cryptographic function. In this paper, a cost-effective key management method is proposed to address the problem of high key update cost without increasing the encryption/decryption cycles. We evaluated our proposed method with existing tree-based methods by using Markov chain and Poisson Arrival Process. Results indicate the efficiency of our proposed method in reducing the key update cost significantly compared to the existing tree-based key management methods.     

Fault detection in analogue circuits using hybrid evolutionary algorithm and neural network

With the development of analog integrated circuits technology and due to the complexity, and various types of faults that occur in analog integrated circuits, fault detection is a new idea, has been studied in recent decades. In this paper a three amplifier state variable filter is used as circuit under test (CUT) and, a hybrid neural network is proposed for soft fault diagnosis of the CUT. Genetic algorithm (GA) has the powerful ability of searching the global optimal solution, and back propagation (BP) algorithm has the feature of rapid convergence on the local optima. The hybrid of two algorithm will improve the evolving speed of neural network. GA-BP scheme adopts GA to search the optimal combination of weights in the solution space, and then uses BP algorithm to obtain the accurate optimal solution quickly. Experiment results show that the proposed GA-BP scheme is more efficient and effective than BP algorithm.     

Impact of renewable energy on rural electrification in Malaysia: a review

Malaysia is rich in renewable energy (RE) resources. Hybrid systems of these resources can contribute strongly to the electrification and sustainable development of rural areas that do not have access to electricity grids. The integration of the generation of hybrid renewable power in remote and rural areas supplies the required power demand and mitigates emissions. Thus, this study reviews the latest literature (theses, journals articles, and conference proceedings) on the need for electricity in remote rural communities, on hybrid RE systems, on environmental impact, and on economic regulation in Malaysia. Power in this country is mainly generated by fossil fuels that emit high concentrations of greenhouse gases. Thus, RE is a potential alternative for to electrify rural areas, to meet current and future energy demands, and to mitigate emissions. Moreover, Malaysia has pledged to reduce its carbon-emission intensity by a maximum of 40 % (2005 level) by the year 2020. Therefore, the implementation of RE technologies in this country is significantly aided by RE projects, research and development activities, technologies, energy policies, and future direction. This review concludes that solar, wind, hydro, and biomass energy, as well as a hybrid of these, can effectively electrify rural areas.     

Natural and artificial radioactivity distribution in soil of Fars Province, Iran

Fars province is a large populated large province located in the southwest of Iran. This work presents a study of natural and radioactivity levels in soil samples of this province. For this purpose, 126 samples were gathered from different regions of the province and analysed by gamma spectroscopy to quantify radioactivity concentrations of radionuclides using a high-purity germanium detector and spectroscopy system. The results of this investigation show the average concentrations of 271 ± 28 Bq kg(-1), 6.37 ± 0.5 Bq kg(-1), 14.9 ± 0.9 Bq kg(-1) and 26.3 ± 1.9 Bq kg(-1) for (40)K, (137)Cs, (232)Th and (238)U in soil, respectively. Finally, baseline maps were established for the concentrations of each of the radionuclides in different regions. The absorbed dose rate and the annual effective dose (AED) were also calculated for the radionuclides according to the guidelines of UNSCEAR 2000. The average AED from the radioactivity content of soil in this province was found to be 39.9 ± 1.8 μSv.