Comparison of prolonged antibacterial activity and release profile of propolis‐incorporated PVA nanofibrous mat,microfibrous mat,and film

Propolis as a natural antibacterial agent was incorporated into the poly(vinyl alcohol) (PVA) in different forms of nanofiber, microfiber, and film. The successful fabrication of uniform nanofibers with 85–314 nm diameters and microfibers with 2.02 μm diameter was proved by scanning electron microscopy. Structural analysis by Fourier transform infrared spectroscopy and X‐ray diffraction and swelling properties confirmed the formation PVA hydrogel and its H‐bonding to the propolis. Evaluation and comparison of antimicrobial properties of produced samples against Staphylococcus aureus strains revealed that nanofiber mat with 19 mm inhibition zone has 11.76 and 26.67% higher efficiency against bacteria than microfiber mat and film with 17 and 15 mm inhibition zone, respectively. Nanofibrous mat showed sustained release during 96 h by maintaining full antibacterial activity up to 51 h which is of great importance in burn wounds. These results confirm the advanced performance of natural propolis in the form of nanofiber substrate as wound dressing. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45794.     

High‐performance carboxylate superplasticizers for concretes: Interplay between the polymerization temperature and properties

Polycarboxylate superplasticizers based on acrylic acid (AA) and maleic anhydride (MAn) were synthesized via free‐radical copolymerization with an ethylene glycol monomer and characterized. The copolymerization temperature (ranging from 50 to 90 °C) appeared to be the key operating factor governing the chemical structure of the superplasticizers. The chemical structures of the products were analyzed by gel permeation chromatography, whereas an optimized sample was further analyzed by Fourier transform infrared spectroscopy and ¹H‐NMR. Superplasticizers of the AA and MAn classes were then incorporated into concrete, and their performances were measured by slump and slump loss tests, where a large dependency of the microstructure on the synthesis temperature was recognized. The optimum temperatures were found to be 50 and 80 °C for the AA and MAn modifiers, respectively. At their own optimum temperatures, the AA and MAn superplasticizer revealed slump losses from 23 to 4 cm and 15 to 5 cm, respectively, after 45 min. The chemical structures of the plasticizers were patterned illustratively to speculate the performance of each superplasticizer according to changes that took place in the backbone length and side‐chain density. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44908.     

Polyamide/Carbon Nanoparticles Nanocomposites: A Review

This review is designed to be a comprehensive source for polyamide (PA) nanocomposite research, including fundamental structure/property relationships, manufacturing techniques, and applications of these materials. This work presents the scientific framework for the advances in PA nanocomposite containing carbon nanofiller, and different methods applied in order to synthesis them. This review focuses on the scientific principles and mechanisms in relation to the methods of processing and manufacturing. A comprehensive discussion on technology, modeling, characterization, processing, manufacturing, and applications have been done. The processing and properties of PA nanocomposites with carbon nanofillers are investigated. In addition, the mechanical properties and morphology changes of PA with the incorporation of nanoparticles are described. POLYM. ENG. SCI., 57:475–494, 2017. © 2016 Society of Plastics Engineers     

Growth of corrosion-resistant manganese oxide coatings on an aluminum alloy

Data are presented on the nucleation and growth of corrosion-resistant manganese-oxide-based films on the surface of aluminum alloy 2024 in an alkaline KMnO₄ solution at room temperature and elevated temperatures, which accelerate film growth. We consider the morphological evolution of the films and secondphase particles present on the alloy surface, which impair the corrosion resistance of the alloy. Also addressed are the feasibility of MnO ₄ ^? incorporation into the growing film and the associated ability of the coating to selfheal when slightly damaged. Such coatings are a viable alternative to chromate-based coatings, which are currently in wide use.     

Low temperature and moisture effects on polarization and depolarization currents of oil-paper insulation

In the last decades, dielectric testing techniques are being used and investigated as potential tools for condition assessment of oil-paper insulation. From fields and laboratory investigations these techniques were found to be highly operating conditions (moisture, ageing, temperature, etc.) dependant. Because field measurements (generally performed after de-energizing the transformer), last hours after de-energizing the transformer, the ambient temperature may affect the results. Especially in cold regions of the world, extreme care is required to interpret the results when performing tests at surrounding low temperatures. A better understanding and analysis of the dielectric test results are therefore only possible with a clear understanding of the physical behaviour of the insulation system in response to the ambient conditions. In the current research project, a series of experiments have been performed under controlled laboratory conditions with preset moisture content inside the insulation. This paper reports the effects of low temperature on the time domain dielectric response of oil impregnated paper insulation.     

Determination of 4-nonylphenol and 4-tert-octylphenol compounds in various types of wastewater and their removal rates in different treatment processes in nine wastewater treatment plants of Iran

Alkylphenols(APs), considered as xenoestrogenic compounds, mainly exist as 4-nonylphenol(4-NP) and 4-tertoctylphenol(4-t-OP) in environments. The high stability and accumulation of APs in aquatic systems have caused endocrine disruption. In this study we measured APs in the wastewater influent and effluent samples, from the urban, rural, livestock, commercial and hospital wastewater treatment plants(WWTPs) in Iran. Dispersive liquid–liquid microextraction(DLLME) combined with gas chromatography–mass spectrometry(GC–MS) was used for the extraction and determination of 4-NP and 4-t-OP. In these treatment plants, various processes such as activated sludge, aerated lagoon, moving bed biofilm reactor and activated sludge along with wetland were applied. The highest concentration of 4-NP and 4-t-OP was observed in commercial and livestock sewages. The activated sludge along with wetland and then the MBBR process showed the highest removal rates of pollutants. The rates of biodegradability and accumulation in sludge were determined and also the specific adsorption coefficient Kdand the organic carbon–water partition coefficient kOCof the sludge for APs were calculated.     

Biodegradation of natural and synthetic estrogens in moving bed bioreactor

Estrogen hormones as a group of endocrine disruptive compounds(EDC) can interfere with endocrine system in humans and animals. The goal of this study was to investigate the elimination rate of Estrone(El), 17β-estradiol(E2) and 17α-ethinyl estradiol(EE2) in Moving Bed Bioreactor(MBBR). These analytes extracted by Dispersive Liquid-Liquid Microextraction(DLLME) technique, followed by derivatization, and detected by GC/MS. Estrogen removal efficiency in MBBR improved at high solid retention times(SRTs), which notion is owing to development of nitrification. Estrogen specific removal rate was between 0.22-1.45 μg·(g VSS)~(-1)·d~(-1) for natural and synthetic hormones. The adsorption rate was 0.9%-3.2%, 0-1.3%, and 0.7%-5.7% for El, E2, and EE2, respectively. In addition, the biodegradation rates were more than 95% for these compounds. These results illustrated that in MBBR,the biodegradation and the adsorption to biomass are considered as two significant routes for elimination of estrogenic compounds. As a whole, the deterioration rate of estrogens enhanced by MBBR compared to other biological wastewater treatment processes such as conventional activated sludge.