Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Rapid synthesis of new block copolyurethanes derived from L‐leucine‐PEG in ionic liquids under microwave irradiation

This study concerns the synthesis of novel multi block polyurethane (PU) copolymers containing eco‐friendly segments, taking the advantage of ionic liquids (IL)s under microwave irradiation. For this, L ‐leucine anhydride cyclodipeptide (LAC) was prepared and then a new class of poly(ether‐urethane‐urea)s (PEUUs) was synthesized with two types of ILs, including room temperature imidazolium (RTIL)s and molten ammonium type ILs. ILs were used as reaction media and PUs were prepared via two‐step polymerization method. Polymerization reaction was also conducted under conventional heating method in N‐methyl pyrrolidone (NMP) as reaction solvent. In the first step, 4,4′‐methylene‐bis(4‐phenylisocyanate) (MDI) was reacted with LAC to produce isocyanate‐terminated poly(imide‐urea) oligomers as hard segment. Chain extension of the resulting prepolymer with polyethyleneglycol (PEG) of molecular weights of 400 (PEG‐400) was the second step to furnish a series of new PEUUs. These multiblock copolymers are optically active, thermally stable and soluble in amide‐type solvents. PEUUs prepared in ILs under microwave irradiation showed more phase separation and crystallinity than PEUU prepared under conventional method. Some structural characterization and physical properties of these PEUUs, prepared under different methods, are reported and compared. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

High yield gold nanoparticle‐based DNA isolation method for human papillomaviruses genotypes from cervical cancer tissue samples

Gold nanoparticles (AuNPs) are commonly used in biosensors of various kinds. However, its application to extract DNA from cancer tissues has not been extensively studied. The purification of DNA from cancer tissues is an important step in diagnostic and therapeutic development. Almost, all cervical cancer cases are associated with high‐risk human papillomavirus (HR‐HPV) infection. Accurate viral diagnosis has so far relied on the extraction of adequate amounts of DNA from formalin‐fixed, paraffin‐embedded (FFPE) tissue samples. Till now, no specific and sensitive DNA purification method has been introduced for the extraction of HR‐HPV from FFPE tissue. Since the commercially available purification kits are not sensitive and specific enough for HR‐HPV DNA targets, in this study, a DNA purification method was designed based on AuNPs to purify sufficient amounts of HR‐HPV DNA from cervical cancer tissue samples. AuNPs were coated with a series of oligonucleotide probes to hybridize to specific DNA sequences of HR‐HPV genotypes. Results showed that 733 out of 800 copies of type‐specific HPV DNA were recovered with complete specificity, compared to 36 copies with a standard commercial kit (Qiagen FFPE). The high yield of DNA (91.6%) is the main advantage of the AuNPs‐probe purification method.Inspec keywords: cancer, biological tissues, microorganisms, gold, DNA, lab‐on‐a‐chip, gynaecology, purification, biochemistry, molecular biophysics, nanoparticles, nanomedicine, cellular biophysicsOther keywords: specific extraction method, cervical cancer tissue samples, high‐risk human papillomavirus infection, paraffin‐embedded tissue samples, specific DNA purification method, sensitive DNA purification method, FFPE tissue, HR‐HPV DNA targets, specific DNA sequences, HR‐HPV genotypes, type‐specific HPV DNA, AuNP‐probe purification method, gold nanoparticle‐based DNA isolation method, oligonucleotide, human papillomaviruse genotypes, clinical samples, Au     

Refractive index determination in fuel cells using high-resolution laser heterodyne interferometer

In this paper, we present an interferometry method for refractive index determination in membranes of fuel cells. This technique is based on the use of an improved laser heterodyne interferometer. The photocurrents of the avalanche photodiodes, resulting from reflected beams of the optical head, are led to the signal conditioner and digital signal processing sections. The optical path difference between the target and reference paths is fixed, and as a result, the phase shift is calculated in terms of the refractive index shift. In addition, nonlinearity of this system is analyzed and modeled with different neural networks and adaptive filter algorithms. For neural networks, the radial basis function (RBF), the multi-layer perceptron (MLP), and the stacked generalization method are simulated. In adaptive filter algorithms, the least mean square (LMS), the normalized least mean square (NLMS), the recursive least squares (RLS), and the affine projection algorithm (APA) are applied. The simulation results indicate that the RLS method is faster and contains minimum mean square error (MSE) compared to the other approaches. Also, comparison between two main approaches shows that the nonlinearity of refractive index determination can be effectively modeled with adaptive filter algorithms.     

Study of macromolecular interactions in low‐fat brined cheese modified with Zedu gum

The functionality of Zedu gum as a fat mimetic in low‐fat brined cheese was studied. The physicochemical, textural, rheological, microstructural and sensory properties of cheese samples modified with 0.1% and 0.25% of Zedu gum were compared to those of control cheeses (low‐fat and full‐fat cheeses with no fat mimetic) during ripening. To obtain further information about the cheeses' structure and interactions between macromolecules (casein protein and Zedu gum), other parameters were analysed by differential scanning calorimetry and Fourier transform infrared (FTIR) spectroscopy. Incorporation of Zedu gum into low‐fat cheese caused an open microstructure and softer texture in comparison with the control low‐fat cheese. The thermal properties and FTIR spectra of the cheeses were influenced by both fat mimetic and ripening time. On days 1 and 60 of ripening time, the lower value of enthalpy of the low‐fat cheese with 0.25 g of Zedu gum/kg of milk (AS 0.25) in comparison with control low‐fat cheese could have been due to the electrostatic nature of the interactions between Zedu gum and casein protein. On both days, the FTIR spectrum of AS 0.25 showed a well separated absorption at 1746 cm^?1 possibly due to the formation of ester groups as a result of the interaction of the carbonyl groups in Zedu gum with the hydroxyl groups of some amino acids in casein.     

AMBO: All Members-Based Optimizer for Solving Optimization Problems

There are many optimization problems in different branches of science that should be solved using an appropriate methodology. Population-based optimization algorithms are one of the most efficient approaches to solve this type of problems. In this paper, a new optimization algorithm called All Members-Based Optimizer (AMBO) is introduced to solve various optimization problems. The main idea in designing the proposed AMBO algorithm is to use more information from the population members of the algorithm instead of just a few specific members (such as best member and worst member) to update the population matrix. Therefore, in AMBO, any member of the population can play a role in updating the population matrix. The theory of AMBO is described and then mathematically modeled for implementation on optimization problems. The performance of the proposed algorithm is evaluated on a set of twenty-three standard objective functions, which belong to three different categories: unimodal, high-dimensional multimodal, and fixed-dimensional multimodal functions. In order to analyze and compare the optimization results for the mentioned objective functions obtained by AMBO, eight other well-known algorithms have been also implemented. The optimization results demonstrate the ability of AMBO to solve various optimization problems. Also, comparison and analysis of the results show that AMBO is superior and more competitive than the other mentioned algorithms in providing suitable solution.     

Barium cobaltite nanoparticles: Sol-gel synthesis and characterization and their electrochemical hydrogen storage properties

The study of the effect of different chelating agents in the Pechini method on the morphology has been a promising strategy that can be used for practical tuning of the nanoparticle's morphology and hence the electrochemical hydrogen storage capacity. In the current study, the conventional Pechini sol-gel approach was used to prepare the Ba₂Co₉O₁₄ nanoparticles as a novel hydrogen storage material. The X-ray diffraction investigation approved the formation of Ba₂Co₉O₁₄ with a Hexagonal crystal structure for all of the synthesized samples. The scanning electron microscopy (SEM) revealed when citric acid was used as a chelating agent, nanoparticles with finer and more uniform morphology were obtained rather than other chelating sources. The transmission electron microscopy (TEM) showed in the presence of citric acid; the size of the synthesized nanoparticles was between 14 and 24 nm. According to the Diffuse Reflectance Spectroscopy (DRS) analysis, the calculated bandgap of synthesized nanoparticles was approximately 3.2 eV, which indicates that synthesized nanoparticles were semiconductors in essence. The electrochemical hydrogen adsorption/desorption results showed that the sample synthesized by the citric acid has an enhancement in electrochemical hydrogen storage of approximately 800 mAh/g after 15 cycles.