Assessment of the load-carrying capacity of multi-span masonry arch bridges using fibre beam elements

An approach that makes use of non-linear beam elements with fibre cross-section has been used for modelling the ultimate behaviour of multi-span masonry arch bridges. The proposed approach proves able to take into account the interaction among the spans and the non-linear material behaviour with low computational effort. In order to validate the use of the model for the assessment of masonry arch bridges, the load-carrying capacity for typical multi-span railway bridges has been evaluated and the results compared to experimental results and to currently used limit analysis methods. It is shown that, by parity of constitutive assumption, the method provides the same results as limit analysis, both in terms of maximum load prediction and hinges position at collapse; however, taking the effective ductility capacity into account, a strong reduction in load-carrying capacity with respect to classical limit analysis was found, depending on rise-to-span arch ratio, piers slenderness and backfill height. The approach is then applied to a seven span viaduct of the Italian railway network, for which the effective mechanical properties of masonry were identified through an experimental campaign on brickwork samples according to the effective material properties surveyed on site.     

Reversing the Psychiatric Effects of Neurodevelopmental Cannabinoid Exposure: Exploring Pharmacotherapeutic Interventions for Symptom Improvement

Neurodevelopmental exposure to psychoactive compounds in cannabis, specifically THC, is associated with a variety of long-term psychopathological outcomes. This increased risk includes a higher prevalence of schizophrenia, mood and anxiety disorders, and cognitive impairments. Clinical and pre-clinical research continues to identify a wide array of underlying neuropathophysiological sequelae and mechanisms that may underlie THC-related psychiatric risk vulnerability, particularly following adolescent cannabis exposure. A common theme among these studies is the ability of developmental THC exposure to induce long-term adaptations in the mesocorticolimbic system which resemble pathological endophenotypes associated with these disorders. This narrative review will summarize recent clinical and pre-clinical evidence that has elucidated these THC-induced developmental risk factors and examine how specific pharmacotherapeutic interventions may serve to reverse or perhaps prevent these cannabis-related risk outcomes.     

Amorphous silicon-based guided-wave passive and active devices forsilicon integrated optoelectronics

Waveguides and interferometric light amplitude modulators for application at the 1.3- and 1.55-μm fiber communication wavelengths have been fabricated with thin-film hydrogenated amorphous silicon and its related alloys. The technique adopted for the thin-film growth is the plasma- enhanced chemical vapor deposition, which has been shown to give the lowest defect concentration in the film. Consequently the proposed waveguiding structures take advantage of the low optical absorption shown by a-Si:H at photon energies below the energy gap. In addition a good radiation confinement can be obtained thanks to the bandgap tailoring opportunity offered by this simple and inexpensive technology. In particular rib waveguides, based on a a-SiC:H/a-Si:H stack, have been realized on crystal silicon, showing low propagation losses. Recently, however, a new interest as low as 0.7 dB/cm. The same structure has been utilized for the fabrication of thermooptic Fabry-Perot modulators with switching times of 10 μs. Modulators based on the alternative waveguiding configuration ZnO/a-Si:H, giving comparable results, are also presented     

Preliminary diagnostic evaluation of submucosal myoma using operative hysteroscopy

BACKGROUND AND AIM: The authors aim to underline the importance of preliminary diagnostic evaluation in the treatment of submucous leiomyoma using hysteroscopy. MATERIALS AND METHODS: The study examined 18 patients monitored at the Institute of Obstetrics and Gynecology of "La Sapienza" University of Rome between January and December 1995 in whom it was possible to make a correct definition of the lesion to be treated (number, site, size, etc.) using 3 different diagnostic methods: hysteroscopy (HS), transvaginal scan (TSV) and transvaginal echohysterography (TVHS) The authors focused attention on three different parameters: leiomyoma size, extension (intracavity/intramural portion) and evaluation of the residual leiomyoma, which are essential for optimal endoscopic resection. RESULTS: HS enabled the number, size, site, origin, base, submucous portion and relations with tube operings to be evaluated, but did not allow the myometrial part of the lesion to be examined. CONCLUSIONS: Integration with TSV, even if this does not allow a precise definition of the extension, highlights the size, site, involvement of myometrial structure and relations with the perimetrium, thus allowing the possibility of evaluating the residual myometrium. Compared to the above methods, TVHS highlights the effective extension (namely the submucous/intramural portion) and localization of the neoformation.     

Neural-fuzzy optimization of thick composites curing process

This article addresses the optimization of curing process for thick composite laminates. The proposed methodology aims at the evaluation of the thermal cycle promoting a desired evolution of the degree of cure inside the material. At the same time, temperature overshooting as well as excessive temperature and cure degree gradient through the thickness of the material are prevented. The developed approach is based on the integrated application of artificial neural networks and a fuzzy logic controller. The neural networks promptly predict the behavior of composite material during curing process, while the fuzzy logic controller continuously and opportunely adjusts the proper variations on the imposed thermal cycle. The results highlighted the efficiency of the method in comparison with the cure profiles dictated by the material suppliers. For thick laminates, a reduction of 35% of cure time and improvements of approximately 10% of temperature overshooting was obtained compared to conventional curing cycles. The method was validated by experimental tests.     

Dynamics of SiO2 Buried Layer Removal from Si-SiO2-Si and Si-SiO2-SiC Bonded Substrates by Annealing in Ar

Silicon-on-silicon-carbide substrates could be ideal for high-power and radiofrequency silicon devices. Such hybrid wafers, when made by wafer bonding, contain an intermediate silicon dioxide layer with poor thermal characteristics, which can be removed by high-temperature annealing in an inert atmosphere. To understand the dynamics of this process, removal of 2.4-nm-thick SiO₂ layers from Si-SiO₂-Si and Si-SiO₂-SiC substrates has been studied at temperatures ranging from 1100°C to 1200°C. The substrates were analyzed by transmission electron microscopy, electron energy-loss spectroscopy, secondary-ion mass spectroscopy, and ellipsometry, before and after annealing. For oxide thickness less than 2.4 nm, the activation energy for oxide removal was estimated to be 6.4 eV, being larger than the activation energy reported for removal of thicker oxides (4.1 eV). Under the same conditions, the SiO₂ layer became discontinuous. In the time domain, three steps could be distinguished: bulk diffusion, bulk diffusion with void formation, and bulk diffusion with disintegration. The void formation, predominant here, has an energetic cost that could explain the larger activation energy. The oxide remaining after prolonged annealing corresponds to one layer of oxygen atoms.     

Development of smooth finishes in electrostatic fluidized bed (EFB) coating process of high-performance thermoplastic powders (PPA 571 H)

This paper deals with the analysis of the evolution of the surface morphology of metal substrates coated with high-performance thermoplastic powders, namely PPA 571 H, by using electrostatic fluidized bed (EFB) process. Attention has been particularly focused on the relationship between baking time and temperature of EFB coated substrates and the morphological characteristics of the resulting polymeric films.

First, thermal behaviour of PPA 571 H polymeric powders was characterized by using standard calorimetric techniques. Accordingly, PPA 571 H melting kinetic was experimentally deduced. Based upon experimental findings, predictive analytical model was also developed and employed to trace ‘iso-conversion’ curves out.

Second, metal substrates, made from low carbon steel (AISI 1040), were EFB coated and baked at several baking time and temperatures. Combined analyses of scanning electron and confocal microscopes were led to measure the evolution of the films surface morphology under different baking conditions. Accordingly, a relationship between film morphologies and melting degree was sought. Consistent trends of roughness parameters versus baking parameters were found, with smoother finishes of the polymeric films being achieved for higher degrees of melting, that is, for higher baking temperature and time. Full maps and related analytical models of the finishing levels according to baking parameters were also built up, hence providing first useful indications to powder coaters on how to best deal with their settings.     

Re-electrospraying splash-landed proteins and nanoparticles

FITC-albumin, Lsr-F, or fluorescent polystyrene latex particles were electrosprayed from aqueous buffer and subjected to dispersion by differential electrical mobility at atmospheric pressure. A resulting narrow size cut of singly charged molecular ions or particles was passed through a condensation growth tube collector to create a flow stream of small water droplets, each carrying a single ion or particle. The droplets were splash landed (impacted) onto a solid or liquid temperature controlled surface. Small pools of droplets containing size-selected particles, FITC-albumin, or Lsr-F were recovered, re-electrosprayed, and, when analyzed a second time by differential electrical mobility, showed increased homogeneity. Transmission electron microscopy (TEM) analysis of the size-selected Lsr-F sample corroborated the mobility observation.