Thermal evaluation of the use of porous ceramic plates on ventilated façades—part II: Thermal behavior

The effects of porous ceramic plates on the thermal behavior of ventilated façades were evaluated, and the results are presented herein. Thermal behavior in a ventilated façade of specimens containing 40 wt% of lime mud and a firing temperature of 1100°C was evaluated and compared with a commercial porcelain ceramic tile, which was the reference material. An experimental apparatus was designed to evaluate the thermal performance of the studied ventilated façades. The results revealed that the ventilated façade composed of the studied porous ceramic tiles produced a greater reduction in temperature between the external environmental and the interior of a box representing a building (ΔT5) of 65.7°C, compared with the façade composed of the commercial porcelain ceramic tiles (ΔT5 = 56.0°C) and even the traditional façade (ΔT5 = 49.1°C). Thus, porous ceramic tiles based on byproducts are promising candidates for ventilated façade systems.     

NO reduction by CH4 over Pd/Co-sulfated zirconia catalysts

A series of sulfated zirconia supported Pd/Co catalysts was synthesized by the sol–gel method and examined for NO_x reduction by methane. The NO conversion increased up to a Co/S ratio of 0.43, and then decreased at a higher Co loading (Co/S = 0.95). Sulfate content was also essential for obtaining high selectivity to molecular nitrogen. A catalyst loaded with 0.06 wt.% Pd, 2.1 wt.% Co and 2.1 wt.% S (Pd/Co-SZ-2) exhibited remarkable performance under lean conditions and displayed stability in a long-term durability test using a synthetic reaction mixture containing 10% water vapor. This catalyst exhibited the highest sulfur retention most probably as cobalt sulfide. Besides, the catalytic oxidation of NO to NO_y groups was confirmed by FT-IR, in agreement with the general mechanism for the SCR of NO by hydrocarbons. In the absence of oxygen in the feed stream, the catalyst was highly active for NO reduction with methane. IR stretching bands assigned to N₂O and adsorbed nitro groups were identified upon adsorbing NO on Pd/Co-SZ-2. This indicates that under rich conditions disproportionation of NO to N₂O and NO₂ occurs and confirms that the formation of NO₂ species is an essential step for NO reduction by CH₄.     

HEAT TRANSFER IN PARTIALLY MISCIBLE TERNARY SYSTEMS

In the study of mass transfer between partially miscible liquids, temperature perturbations have been found to have an important effect in the generation of interfacial activity. Micro- and macro-generated interfacial convection usually occurs in combination with one another even in fairly simple heat or mass transfer events. These combinations are responsible for the enhancement of mass transfer rates. In an effort to acquire a better understanding of the heat transfer effects in ternary liquid-liquid systems, temperature difference profiles were measured when contacting two partially miscible phases. A vertical and a rotational transfer cell were designed to contact the partially miscible phases without inducing external disturbances. Five thermocouples were immersed in the bottom liquid phase at predetermined positions below the interface. In order to understand the influence of the convection generated, the vertical cell was designed to hinder convection in one phase, while the rotational cell permits convection in both phases. The experimental results showed larger temperature differences in the rotational cell after the contact of the phases. Also, systems which were initially unsaturated presented larger heat effects than those in which the partially miscible solvents were initially saturated. Several parameters indicating the importance of heat effects in the ternary systems studied are reported.     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

Improving process models by mining mappings of low-level events to high-level activities

While it is possible to analyze the run-time behavior of a business process through process mining techniques, in practice there is often a gap between the low-level nature of the events recorded in an event log and the high-level of abstraction at which the process is modeled. This makes it difficult to understand the recorded behavior in terms of the high-level activities in the process model. Also, it makes it difficult to improve the model based on run-time data about the process. In this work we present an approach to mine mappings between the events in the log and the activities in the model. These mappings can be used to generate suggestions of how the process model can be extended in order to capture the behavior recorded in the event log. Using a real-world and publicly available event log, we show how the approach can improve the model in a stepwise manner, until it covers all the behavior recorded in the event log.     

Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

The toughness of copolymers of polypropylene

A series of fracture mechanics tests of a set of random and impact copolymers of polypropylene, in which the ethylene content was varied, is described. The plane strain toughness is found to change from the homopolymer value, but thereafter to be independent of ethylene content. The yield stress of the impact copolymers decreases markedly with ethylene content, while that for random copolymers increases only slightly. This is reflected in toughness values in tension. A comparison with the behavior of other rubber-modified materials is made and it is concluded that crazing is an important mechanism in polypropylene and is perhaps more rate and temperature sensitive than in acrylonitrile-butadiene-styrene (ABS).     

Design and development of low‐cost optical‐fiber sensors for temperature metrology: Process monitoring of an epoxy resin system

This article reports the design and deployment of two optical‐fiber temperature sensors based on the fiber Fabry–Perot etalon. The first involved the use of an extrinsic fiber Fabry–Perot sensor, but in this instance, the coefficient of thermal expansion of the reflector and/or capillary was chosen to offer a mismatch. Hence, the cavity length could increase or decrease according to the coefficient of thermal expansion of the fiber and/or capillary. For comparison, single‐mode and multimode optical‐fiber Bragg gratings were also used as temperature sensors. The Fabry–Perot sensors operated from ?50 to 410°C. The accuracy of the measurements was up to ±0.5°C with a low‐cost charged‐coupling‐device spectrometer. The sensors also worked effectively in a microwave oven and in a composite panel in an autoclave. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 83–95, 2004     

Catalytic combustion of trichloroethene over Ru/Al2O3: Reaction mechanism and kinetic study

The performance of 0.5% Ru/Al₂O₃ for the deep oxidation of trichloroethene (1000–2500 ppmV, WHSV = 55 h⁻¹) in air was studied in this work. Experiments were carried out both at dry and wet (20,000 ppmV of H₂O) conditions. Catalytic performance was studied in terms of activity and selectivity for the different reaction products (CO₂, HCl, Cl₂, C₂Cl₄, CCl₄ and CHCl₃). Both the activity and the selectivity for total combustion are higher than other catalysts suggested in the literature for this process (especially Pd and Pt).The main organic by-products are CCl₄ and CHCl₃, whereas in all the other catalysts tested in the literature, tetrachloroethene is the main organic by-product. This fact suggests that the mechanism of the combustion reaction, involving a double-bond scission, is essentially specific for this catalyst.Kinetic data was fit to a pseudo-first order kinetic expression, providing fairly good fit.     

Theory of asymmetric organocatalysis of Aldol and related reactions: rationalizations and predictions

Computational studies have led to models to understand some classic and contemporary asymmetric reactions involving organocatalysts. The Hajos-Parrish-Eder-Sauer-Wiechert reaction and intermolecular aldol reactions as well as Mannich reactions and oxyaminations catalyzed by proline and other amino acids, and Diels-Alder reactions catalyzed by MacMillan's chiral amine organocatalysts have been studied with density functional theory. Quantitative predictions for several new catalysts and reactions are provided.