In Situ Attenuated Total Reflection (ATR/FT-IR) Tribometry: A Powerful Tool for Investigating Tribochemistry at the Lubricant–Substrate Interface

To investigate the chemical changes occurring at metal/lubricant interfaces under tribological conditions in the boundary-lubrication regime, an in situ system for conducting quantitative tribological measurements has been constructed by combining an attenuated total reflection Fourier-transform infrared (ATR/FT-IR) spectrometer with a reciprocating tribometer. By periodically acquiring ATR/FT-IR spectra during sliding, spectroscopic changes due to thermal and/or tribochemical reactions occurring at the metal/oil interface can be monitored and correlated with friction measurements. The usefulness of this tribological test system has been demonstrated by performing ATR tribological experiments in the presence of a poly-α-olefin base oil at high temperature (423 K) on iron-coated germanium ATR crystals.     

Two-points-based receptance coupling method for tool-tip dynamics prediction

Tool-tip frequency response function (FRF) is essential to predict chatter vibration in milling. This key input can be acquired by experimental tests, but a new test has to be performed for every tool clamped on the machine. To avoid such time-consuming procedures, receptance coupling methods have been developed, allowing coupling of the experimental dynamic response of the machine to the numerical model of the tool. Such techniques require joint rotation response, which is hard to experimentally identify. Inversion of receptance coupling technique is usually performed on additional experimental measurements to overcome this issue. This procedure amplifies measurement uncertainties, reducing accuracy of the coupling approach. In this article, a novel receptance coupling technique is presented. Machine and toolkit are connected through two distinct points, eliminating the experimental phase and computation of rotational degrees of freedom (DOFs). Only translation responses are required, acquired by a single test setup. Proposed technique was experimentally validated on different case studies.     

Cooperative caging and transport using autonomous aquatic surface vehicles

We present a study on the cooperative control of two autonomous surface vehicles performing a caging and transport mission on the water surface. The two vehicles, connected to each other by means of a floating flexible rope, are required to capture a floating target from a given location, and transport it to a designated position. We focus on the coordination and control strategy to meet these requirements, and on its implementation on two under-actuated vehicles. We describe a multi-layered control architecture which achieves the goal, followed by simulation studies and field experiments with the two vehicles caging and transporting a floating target on the surface of a lake.     

Vitamin E acetate addition to poly(d,l)lactic acid modifies its mechanical behavior without affecting biocompatibility

Mechanical properties of poly(d,l )lactic acid films enriched with Vitamin E and Vitamin E Acetate (5–40% w/w) were investigated. The addition of both formulations resulted in increased polymer Young's modulus and tensile strength. Human foreskin fibroblasts and murine pre‐osteoblasts were used to assess the biocompatibility of polymers. Pre‐osteoblasts adhesion and proliferation were strongly decreased by Vitamin E, whereas Vitamin E Acetate did not alter cell proliferation. Collagen deposition was lower onto Vitamin E blended polymers than onto native and Vitamin E Acetate blended ones. Fibroblasts adhesion and proliferation were increased by both Vitamin E and Vitamin E Acetate addition. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39970.     

3D Bioprinting of Gelatin–Xanthan Gum Composite Hydrogels for Growth of Human Skin Cells

In recent years, bioprinting has attracted much attention as a potential tool for generating complex 3D biological constructs capable of mimicking the native tissue microenvironment and promoting physiologically relevant cell–cell and cell–matrix interactions. The aim of the present study was to develop a crosslinked 3D printable hydrogel based on biocompatible natural polymers, gelatin and xanthan gum at different percentages to be used both as a scaffold for cell growth and as a wound dressing. The CellInk Inkredible 3D printer was used for the 3D printing of hydrogels, and a glutaraldehyde solution was tested for the crosslinking process. We were able to obtain two kinds of printable hydrogels with different porosity, swelling and degradation time. Subsequently, the printed hydrogels were characterized from the point of view of biocompatibility. Our results showed that gelatin/xanthan-gum bioprinted hydrogels were biocompatible materials, as they allowed both human keratinocyte and fibroblast in vitro growth for 14 days. These two bioprintable hydrogels could be also used as a helpful dressing material.     

Validation of a Cleanroom Compliant Sonication-Based Decellularization Technique: A New Concept in Nerve Allograft Production

Defects of the peripheral nervous system are extremely frequent in trauma and surgeries and have high socioeconomic costs. If the direct suture of a lesion is not possible, i.e., nerve gap > 2 cm, it is necessary to use grafts. While the gold standard is the autograft, it has disadvantages related to its harvesting, with an inevitable functional deficit and further morbidity. An alternative to autografting is represented by the acellular nerve allograft (ANA), which avoids disadvantages of autograft harvesting and fresh allograft rejection. In this research, the authors intend to transfer to human nerves a novel technique, previously implemented in animal models, to decellularize nerves. The new method is based on soaking the nerve tissues in decellularizing solutions while associating ultrasounds and freeze–thaw cycles. It is performed without interrupting the sterility chain, so that the new graft may not require post-production γ-ray irradiation, which is suspected to affect the structural and functional quality of tissues. The new method is rapid, safe, and inexpensive if compared with available commercial ANAs. Histology and immunohistochemistry have been adopted to evaluate the new decellularized nerves. The study shows that the new method can be applied to human nerve samples, obtaining similar, and, sometimes better, results compared with the chosen control method, the Hudson technique.     

Diagnostic Accuracy of CT Texture Analysis in Adrenal Masses: A Systematic Review

Adrenal incidentalomas (AIs) are incidentally discovered adrenal neoplasms. Overt endocrine secretion (glucocorticoids, mineralocorticoids, and catecholamines) and malignancy (primary or metastatic disease) are assessed at baseline evaluation. Size, lipid content, and washout characterise benign AIs (respectively, <4 cm, <10 Hounsfield unit, and rapid release); nonetheless, 30% of adrenal lesions are not correctly indicated. Recently, image-based texture analysis from computed tomography (CT) may be useful to assess the behaviour of indeterminate adrenal lesions. We performed a systematic review to provide the state-of-the-art of texture analysis in patients with AI. We considered 9 papers (from 70 selected), with a median of 125 patients (range 20–356). Histological confirmation was the most used criteria to differentiate benign from the malignant adrenal mass. Unenhanced or contrast-enhanced data were available in all papers; TexRAD and PyRadiomics were the most used software. Four papers analysed the whole volume, and five considered a region of interest. Different texture features were reported, considering first- and second-order statistics. The pooled median area under the ROC curve in all studies was 0.85, depicting a high diagnostic accuracy, up to 93% in differentiating adrenal adenoma from adrenocortical carcinomas. Despite heterogeneous methodology, texture analysis is a promising diagnostic tool in the first assessment of patients with adrenal lesions.     

Survey of 1,2-dicarbonyl compounds in commercial honey of different floral origin

In this study we conducted a survey of the concentrations of the major 1,2-dicarbonyl compounds in 40 commercial honey samples from 12 different floral origins. 3-Deoxyglucosone (3-DG), glyoxal (GO), and methylglyoxal (MGO) were measured, using their corresponding quinoxaline derivatives, by high-performance liquid chromatography (HPLC). The analytical performance of the HPLC method for the analysis of 1,2-dicarbonyl compounds was evaluated in terms of linearity, limits of detection (LODs), limits of quantification (LOQs), and precision. Linearity over 2 orders of magnitude, LODs (0.01-0.04 mg/kg), and LOQs (0.03-0.12 mg/kg) were calculated. Instrumental precision, as measured by the repeatability relative standard deviation% (RSDr%), was found to be between 0.22% and 0.55%. Furthermore, the concentrations of factors GO and MGO with respect to 3-DG were also calculated for rapid quantification in honey. In honey samples, the concentrations of 3-DG ranged from 75.9 to 808.6 mg/kg and were significantly higher (up to 100-fold) than those of 5-hydroxymethylfurfural (HMF). Values for GO and MGO were 0.1-10.9 and 0.2-2.9 mg/kg, respectively. The chemical characteristics that most influenced the levels of 1,2-dicarbonyl compounds in honey were found to be pH and total phenols. This was supported by multivariate analysis used to classify different honey types with respect to their chemical characteristics. In addition, both dicarbonyls and phenols are believed to contribute to the development of the final color of honey.     

APOB CRISPR-Cas9 Engineering in Hypobetalipoproteinemia: A Promising Tool for Functional Studies of Novel Variants

Hypobetalipoproteinemia is characterized by LDL-cholesterol and apolipoprotein B (apoB) plasma levels below the fifth percentile for age and sex. Familial hypobetalipoproteinemia (FHBL) is mostly caused by premature termination codons in the APOB gene, a condition associated with fatty liver and steatohepatitis. Nevertheless, many families with a FHBL phenotype carry APOB missense variants of uncertain significance (VUS). We here aimed to develop a proof-of-principle experiment to assess the pathogenicity of VUS using the genome editing of human liver cells. We identified a novel heterozygous APOB-VUS (p.Leu351Arg), in a FHBL family. We generated APOB knock-out (KO) and APOB-p.Leu351Arg knock-in Huh7 cells using CRISPR-Cas9 technology and studied the APOB expression, synthesis and secretion by digital droplet PCR and ELISA quantification. The APOB expression was decreased by 70% in the heterozygous APOB-KO cells and almost abolished in the homozygous-KO cells, with a consistent decrease in apoB production and secretion. The APOB-p.Leu351Arg homozygous cells presented with a 40% decreased APOB expression and undetectable apoB levels in cellular extracts and supernatant. Thus, the p.Leu351Arg affected the apoB secretion, which led us to classify this new variant as likely pathogenic and to set up a hepatic follow-up in this family. Therefore, the functional assessment of APOB-missense variants, using gene-editing technologies, will lead to improvements in the molecular diagnosis of FHBL and the personalized follow-up of these patients.     

Role of brown adipose tissue in thermogenesis induced by overfeeding a diet containing medium chain triglyceride

The role of brown adipose tissue in the mechanism of medium chain triglyceride (MCT)-induced thermogenesis was investigated. Under anesthesia, the interscapular brown adipose tissue (IBAT) was excised in male Sprague-Dawley rats, and the animals were fitted with gastrostomy tubes. After a 10-day recovery period, the animals were divided into two groups: one group received a diet containing MCT as 50% of calories, and the other group received an isocaloric diet containing long chain triglyceride (LCT). The diets were fed for 6 wk at a level of calorie intake that was 150% of the ad libitum intake of a parallel control group. During the last week of the study, resting and norepinephrine (NE)-stimulated O₂ consumption and CO₂ production were measured in a Noyons diaferometer. At the end of 6 wk, the animals were weighed and killed. The individual fat pads were dissected and weighed, and an aliquot of the right retroperitoneal fat pad was used to measure adipocyte size and number. The results showed that body weight and adipocyte size (but not adipocyte number) were significantly smaller in the MCT-fed compared to the LCT-fed animals. Resting as well as maximal NE-stimulated oxygen consumption values were significantly higher in the MCT-fed than the LCT-fed rats. It is concluded that the enhanced thermogenesis induced by MCT persists despite the absence of IBAT and that the phenomenon is likely related to more extensive oxidation of MCT-in contrast to LCT-derived fatty acids, thus leading to increased oxygen consumption, enhanced dissipation of energy as heat and diminished efficiency of weight gain and deposition of body fat. Presented at the symposium on “Specialty Lipids and Their Biofunctionality” at the annual meeting of the American Oil Chemists' Society, Philadelphia, May 1985.