On-line 3-D system for the inspection of deformable parts

In spite of the development of automated tolerance inspection systems for manufactured parts over the years, there are still processes that inevitably require manual intervention making full automation impossible in most cases; in particular when dealing with deformable parts. In most current industrial inspection systems, a deformable part under inspection must first be mechanically constrained on a rigid support or jig so as to be able to compare it with its nominal shape. This paper presents a new system to perform real-time surface inspection of deformable parts that does not require fixturing. Instead, the proposed system applies virtual forces to the part??s CAD model as if the part was installed in the fixturing device. Normally, a precise finite element method (FEM) simulation should be used to approximate the deformation that appends when the part is installed in the device. Even with a fast parallel computer, FEM is far from being real-time and cannot be used for on-line inspection. In the proposed system, a radial basis function approximation of the FEM simulation is trained off-line and used to speed-up the simulation by an order of magnitude. Experimental evaluation of the proposed system is presented for three plastic parts. Using the proposed scheme, an approximation of 0.25?mm compared with the real deformation was obtained. In this paper, statistical results are presented such as the average deviation, standard deviation, and processing time between the approximations obtained with the proposed method and with the finite element method applied to the full CAD model.     

Analysis and behavior of steel storage drive-in racks

This work presents a general analysis of drive-in racks, evaluating the influence of each of their components on global stability. In this study, a full-scale test of a drive-in system was carried out. Finite element models were also developed to evaluate global structural stability and component influence on system behavior. The experimental and numerical results show that the connections and base plates have the most significant influence on the system's behavior. This influence is analyzed, an equation that predicts base plate resistance is then proposed, and its results are compared with experimental and numerical results.     

Squalenoyl nanomedicines as potential therapeutics

Nucleoside analogues display significant anticancer or antiviral activity by interfering with DNA synthesis. However, there are some serious restrictions to their use, including their rapid metabolism and the induction of resistance. We have discovered that the linkage of nucleoside analogues to squalene leads to amphiphilic molecules that self-organize in water as nanoassemblies of 100-300 nm, irrespective of the nucleoside analogue used. The squalenoyl gemcitabine exhibited superior anticancer activity in vitro in human cancer cells and gemcitabine-resistant murine leukemia cells, and in vivo in experimental leukemia both after intravenous and oral administration. The squalenoylation of other antiretroviral nucleosides also led to more potent drugs when tested in primary cultures of HIV-infected lymphocytes. Thus, the squalenoylation is an original technology platform for generating more potent anticancer and antiviral nanomedicines.     

Modeling failure of heterogeneous viscoelastic solids under dynamic/impact loading due to multiple evolving cracks using a two-way coupled multiscale model

This paper presents a model for predicting damage evolution in heterogeneous viscoelastic solids under dynamic/impact loading. Some theoretical developments associated with the model have been previously reported. These are reviewed briefly, with the main focus of this paper on new developments and applications. A two-way coupled multiscale approach is employed and damage is considered in the form of multiple cracks evolving in the local (micro) scale. The objective of such a model is to develop the ability to consider energy dissipation due to both bulk dissipation and the development of multiple cracks occurring on multiple length and time scales. While predictions of these events may seem extraordinarily costly and complex, there are multiple structural applications where effective models would save considerable expense. In some applications, such as protective devices, viscoelastic materials may be preferred because of the considerable amount of energy dissipated in the bulk as well as in the fracture process. In such applications, experimentally based design methodologies are extremely costly, therefore suggesting the need for improved models. In this paper, the authors focus on the application of the newly developed multiscale model to the solution of some example problems involving dynamic and impact loading of viscoelastic heterogeneous materials with growing cracks at the local scale.     

A two-way coupled multiscale model for predicting damage-associated performance of asphaltic roadways

This paper presents a quasi-static multiscale computational model with its verification and rational applications to mechanical behavior predictions of asphaltic roadways that are subject to viscoelastic deformation and fracture damage. The multiscale model is based on continuum thermo-mechanics and is implemented using a finite element formulation. Two length scales (global and local) are two-way coupled in the model framework by linking a homogenized global scale to a heterogeneous local scale representative volume element. With the unique multiscaling and the use of the finite element technique, it is possible to take into account the effect of material heterogeneity, viscoelasticity, and anisotropic damage accumulation in the small scale on the overall performance of larger scale structures. Along with the theoretical model formulation, two example problems are shown: one to verify the model and its computational benefits through comparisons with analytical solutions and single-scale simulation results, and the other to demonstrate the applicability of the approach to model general roadway structures where material viscoelasticity and cohesive zone fracture are involved.     

High Spatial Resolution Mapping of Localized Surface Plasmon Resonances in Single Gallium Nanoparticles

Plasmonics has emerged as an attractive field driving the development of optical systems in order to control and exploit light–matter interactions. The increasing interest around plasmonic systems is pushing the research of alternative plasmonic materials, spreading the operability range from IR to UV. Within this context, gallium appears as an ideal candidate, potentially active within a broad spectral range (UV–VIS–IR), whose optical properties are scarcely reported. Importantly, the smart design of active plasmonic materials requires their characterization at high spatial and spectral resolution to access the optical fingerprint of individual nanostructures, attainable by transmission electron microscopy techniques (i.e., by means of electron energy‐loss spectroscopy, EELS). Therefore, the optical response of individual Ga nanoparticles (NPs) by means of EELS measurements is analyzed, in order to spread the understanding of the plasmonic response of Ga NPs. The results show that single Ga NPs may support several plasmon modes, whose nature is extensively discussed.     

Identification of elastic, dielectric, and piezoelectric constants in piezoceramic disks

Three-dimensional modeling of piezoelectric devices requires a precise knowledge of piezoelectric material parameters. The commonly used piezoelectric materials belong to the 6mm symmetry class, which have ten independent constants. In this work, a methodology to obtain precise material constants over a wide frequency band through finite element analysis of a piezoceramic disk is presented. Given an experimental electrical impedance curve and a first estimate for the piezoelectric material properties, the objective is to find the material properties that minimize the difference between the electrical impedance calculated by the finite element method and that obtained experimentally by an electrical impedance analyzer. The methodology consists of four basic steps: experimental measurement, identification of vibration modes and their sensitivity to material constants, a preliminary identification algorithm, and final refinement of the material constants using an optimization algorithm. The application of the methodology is exemplified using a hard lead zirconate titanate piezoceramic. The same methodology is applied to a soft piezoceramic. The errors in the identification of each parameter are statistically estimated in both cases, and are less than 0.6% for elastic constants, and less than 6.3% for dielectric and piezoelectric constants.