Characterization of emissions from burning incense

The primary objective of this study was to improve the characterization of particulate matter emissions from burning incense. Emissions of particulate matter were measured for 23 different types of incense using a cyclone/filter method. Emission rates for PM2.5 (particulate matter less than 2.5 microm in aerodynamic diameter) ranged from 7 to 202 mg/h, and PM2.5 emission factors ranged from 5 to 56 mg/g of incense burned. Emission rates were also determined using an electrical low pressure impactor (ELPI) and a small electrostatic precipitator (ESP), and emission rates were compared to those determined using the cyclone/filter method. Emission rates determined by the ELPI method were consistently lower than those determined by the cyclone/filter method, and a linear regression correlation was found between emission rates determined by the two methods. Emission rates determined by the ESP method were consistently higher than those determined by the cyclone/filter method, indicating that the ESP may be a more effective method for measuring semivolatile particle emissions. A linear regression correlation was also found between emission rates determined by the ESP and cyclone/filter methods. Particle size distributions were measured with the ELPI, and distributions were found to be similar for most types of incense that were tested. Size distributions by mass typically ranged from approximately 0.06 to 2.5 microm in aerodynamic diameter, with peak values between 0.26 and 0.65 microm. Results indicated that burning incense emits fine particulate matter in large quantities compared to other indoor sources. An indoor air quality model showed that indoor concentrations of PM25 can far exceed the outdoor concentrations specified by the US EPA's National Ambient Air Quality Standards (NAAQS), so incense smoke can pose a health risk to people due to inhalation exposure of particulate matter. Emissions of carbon monoxide (CO), nitric oxide (NO), and sulfur dioxide (SO2) were also measured for seven types of incense. Emission rates of the gaseous pollutants were sufficient to cause indoor concentrations, estimated using the indoor air quality model, to exceed the outdoor concentrations specified by the NAAQS under certain conditions. However, the incense samples that were tested would fill a room with thick smoke under these conditions.     

Distinguishing the influence of aluminium and vanadium additions on microstructural evolution and densification behaviour during the sintering of ti6Al,ti4V and ti6al4v

In this work, the influence of pure Al (Ti6Al) and V (Ti4?V) powder additions on the sintering behaviour of a coarse CP-Ti powder compact was investigated. Pure Al melts and spreads to form intermetallic layers at the CP-Ti surface, causing swelling and prevention of sintering and shrinkage below 1050°C. Ti4?V compacts do not swell and begin to sinter at 990°C. The sinter rate for both Ti4?V and Ti6Al are similar at 1200°C and higher than the CP-Ti compact alone. Aluminium melting distributes this element better than the dispersed V particles, leading to more rapid homogenisation. When both pure Al and V are present (Ti6Al4?V), the sintering rate at 1200°C is similar to that of Ti6Al and Ti4?V. However, swelling is increased and homogenisation is slower, resulting in a reduced sintering aid effect compared to Ti6Al and Ti4?V.     

Electroanalytical behavior of poly-L-lysine dendrigrafts at the interface between two immiscible electrolyte solutions

In this work, the electrochemical behavior of nonredox-active poly-L-lysine dendrigraft molecules of four different generations was investigated at the interface between two immiscible electrolyte solutions (ITIES). The influence of the dendrigraft generation on the electrochemical response, sensitivity of the calibration curves, and limit of detection was studied. Cyclic voltammetry at the ITIES revealed that the sensitivity increased (1840 to 25?800 nA μM(-1)) and the limit of detection decreased (11.10 to 0.65 μM) as the dendrigraft generation increased from generation G2 through to generation G5, respectively. The results are compared to those for protein voltammetry at the ITIES. Our studies suggest that the sensitivity expected for a synthetic ionized macromolecule can be predicted on the basis of its net charge and its diffusion coefficient. However, electrochemistry at the ITIES demonstrates a greater sensitivity toward proteins, which is attributed to their tertiary structure.     

An ecological analysis of research examining the experiences of students of color in graduate school.

This article critically reviews methodologies and theoretical orientations of 27 published empirical studies examining the graduate school experiences of students of color using Bronfenbrenner's (1979, 1994) bioecological model. Despite the urgent need for evidence-based approaches to increase the number of scholars of color, the findings in this review indicate an inadequate number of studies explaining how to realize that goal. Furthermore, much of the existing literature examined individual-level characteristics rather than how environmental factors benefit students. Specific recommendations for future ecological research are provided. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Mushroom Hunting by Using Bioinformatics: Application of a Predictive Framework Facilitates the Selective Identification of Sesquiterpene Synthases in Basidiomycota

The Basidiomycota fungi represent a diverse source of natural products, particularly the sesquiterpenoids. Recently, genome sequencing, genome mining, and the subsequent discovery of a suite of sesquiterpene synthases in Omphalotus olearius was described. A predictive framework was developed to facilitate the discovery of sesquiterpene synthases in Basidiomycota. Phylogenetic analyses indicated a conservation of both sequence and initial cyclization mechanisms used. Here, the first robust application of this predictive framework is reported. It was used to selectively identify sesquiterpene synthases that follow 1,6‐, 1,10‐, and 1,11‐cyclization mechanisms in the crust fungus Stereum hirsutum. The successful identification and characterization of a 1,6‐ and a 1,10‐cyclizing sesquiterpene synthase, as well as three 1,11‐cyclizing Δ⁶‐protoilludene synthases, is described. This study verifies the accuracy and utility of the predictive framework as a roadmap for the discovery of specific sesquiterpene synthases from Basidiomycota, and thus represents an important step forward in natural product discovery.     

Quantitative Determination of Cellular Farnesyltransferase Activity: Towards Defining the Minimum Substrate Reactivity for Biologically Relevant Protein Farnesylation

Prenylation is a post‐translational modification wherein an isoprenoid group is attached to a protein substrate by a protein prenyltransferase. Hundreds of peptide sequences are in vitro substrates for protein farnesyltransferase (FTase), but it remains unknown which of these sequences can successfully compete for in vivo prenylation. Translating in vitro studies to predict in vivo protein farnesylation requires determining the minimum reactivity needed for modification by FTase within the cell. Towards this goal, we developed a reporter protein series spanning several orders of magnitude in FTase reactivity as a calibrated sensor for endogenous FTase activity. Our approach provides a minimally invasive method to monitor changes in cellular FTase activity in response to environmental or genetic factors. Determining the reactivity “threshold” for in vivo prenylation will help define the prenylated proteome and identify prenylation‐dependent pathways for therapeutic targeting.     

Protective Performance of Environmentally Stressed Fabrics Containing Melamine Fiber Blends

In this study, the mechanical properties critical to the protective performance of firefighter turnout gear were evaluated for environmentally stressed outer shell (OS) fabrics containing melamine fiber blends. Environmental stress factors that affect the durability of turnout gear include temperature, ultraviolet (UV) radiation, moisture, abrasion, and laundering. The effect of fiber blend, fabric construction, and finishing processes including water repellent coatings and pigmented melamine-containing OS fabrics were also studied. Melamine-containing OS fabrics show comparable thermal protective performance and have superior tear resistance when compared to the traditionally used polyaramid blends. This study reveals that the thermal protective protection (TPP) rating of fabric assemblies incorporating environmentally stressed OS fabrics containing melamine fiber blends is well above the NFPA minimum TPP requirement of 35 cal/cm². However, the tear strength (measured using ASTM D 5587 standard test method) of all melamine-containing OS fabrics exposed to environmental stresses was observed to have significantly deteriorated, and most OS fabrics, depending on fiber blend and fabric structure, would fail to meet requirements of NFPA 1971 standard. The study thus suggests that environmental stressing has a more detrimental impact on the tear strength than the thermal protective performance of OS fabrics. Deterioration in tear strength of all UV exposed OS fabrics is largely due to photodegradation of constituent fibers. Changes in tear strength of OS fabrics subjected to thermal exposures and laundering is cumulative effect of loss in tensile strength of single yarns and dimensional stability of the fabric itself. Furthermore, finishing treatments affect performance properties of fabric by increasing fiber packing factor in yarn, changing yarn crimp and yarn spacing thereby making dimensional changes to the fabric. Surface coatings alter tear resistance of fabric by influencing yarn slippage and fabric rigidity. Fabrics dyed with black and dark blue dyes cause less UV degradation of fibers than bright yellow and brown dyes.     

Binding of zinc to bovine and human milk proteins

Zn binding by whole bovine and human casein and by purified bovine caseins and whey proteins was investigated by equilibrium dialysis. Bovine alpha s1-casein had the greatest Zn-binding capacity (approximately 11 atoms Zn/mol). Protein aggregation was observed as Zn concentration was increased and the protein precipitated at a free Zn concentration of 1.7 mM. Zn binding increased with increasing pH in the range 5.4-7.0 and decreased with increasing ionic strength. Competition between Zn and Ca was observed for binding to alpha s1-casein indicating common binding sites for these two metals. Bovine beta-casein bound up to 8 atoms Zn/mol and precipitated at a free Zn concentration of approximately 2.5 mM, while kappa-casein bound 1-2 atoms Zn/mol. Whole bovine and human casein bound 5-8 atoms Zn/mol and precipitated at a free Zn concentration of approximately 2.0 mM. Scatchard plots for Zn binding to caseins showed upward convexity, possibly due to Zn-induced association of caseins. Apparent average association constants (Kapp) for all caseins were similar (log Kapp 3.0-3.2). Enzymic dephosphorylation of alpha s1- or whole bovine casein markedly reduced, but did not eliminate, Zn binding. Thus, phosphoserine residues appeared to be the primary Zn-binding sites in caseins. With the exception of bovine serum albumin, which bound over 8 atoms Zn/mol, the bovine whey proteins, beta-lactoglobulin, alpha-lactalbumin and lactotransferrin, had little capacity for Zn binding.     

The natural food grade inhibitor, lacticin 3147, reduced the incidence of mastitis after experimental challenge with Streptococcus dysgalactiae in nonlactating dairy cows.

Lacticin 3147 is a broad-spectrum bacteriocin produced by the food-grade organism Lactococcus lactis. Lacticin 3147 is active at a neutral pH and has been shown to be bactericidal to streptococci and staphylococci in vitro. The effectiveness of an intramammary teat seal formulation, and a teat seal containing lacticin 3147 was evaluated at drying off in 68 uninfected quarters of 18 cows. Following infusion of either teat seal or lacticin 3147 combined with teat seal, a deliberate infection challenge of Streptococcus dysgalactiae (approximately equal to 1.5 x 10(4) cfu per teat) was administered by direct inoculation into the teat sinus. During an 8-d experimental period following inoculation, 61% of control quarters and 6% of the treatment quarters either developed clinical mastitis or were shedding the challenge organism. Randomly amplified polymorphic DNA polymerase chain reaction genetic typing was used to confirm that both the new infections and the bacteria surviving in the teats at the end of the experiment were the challenge strain. The combination of teat seal and lacticin 3147 was well tolerated within the udder and elicited only a temporary increase in somatic cell count to 5.7 x 10(5)/ml (88 h after infusion) in a previously uninfected lactating udder quarter. Therefore, we concluded that this nonantibiotic approach to mastitis prevention may contribute to a reduction in the routine application of antibiotics at drying off in the future.