Physical workload on neck and upper limb using two CAD applications

The aim was to evaluate (1) the physical workload on neck and upper limb in computer-aided design (CAD) work; (2) the impact of two applications (PROFESSIONAL-CADAM and PRO/Engineering) and (3) two input devices (computer mouse and keyboard), as well as (4) sitting and standing work positions. Fifteen CAD operators were interviewed and examined physically. For nine subjects, the physical workload was measured: electromyography (EMG) of trapezius and forearm extensor muscles, inclinometry of the head, the upper back and upper arms, as well as wrist goniometry. The muscular load was low in CAD work, but the inter-individual variation was considerable. Neither the positions were extreme, nor the movements. The applications, per se, did not have a large impact on the workload, but because of the need for different input devices the effect was strong. Using a keyboard meant higher angular velocities than using a mouse. Hence, when choosing a new software, which requires mainly a mouse as input device, this has to be balanced against the risk of disorders.     

Effective Sample Size in Diffuse Reflectance Near-IR Spectrometry

Two independent methods for determination of the effectively sampled mass per unit area are presented and compared. The first method combines directional-hemispherical transmittance and reflectance measurements. A three-flux approximation of the equation of radiative transfer is used, to separately determine the specific absorption and scattering coefficients of the powder material, which subsequently are used to determine the effective sample size. The second method uses a number of diffuse reflectance measurements on layers of controlled powder thickness in an empirical approach. The two methods are shown to agree well and thus confirm each other. From the determination of the effective sample size at each measured wavelength in the visible-NIR region for two different model powder materials, large differences was found, both between the two analyzed powders and between different wavelengths. As an example, the effective sample size ranges between 15 and 70 mg/cm(2) for microcrystalline cellulose and between 70 and 300 mg/cm(2) for film-coated pellets. However, the contribution to the spectral information obtained from a certain layer decreases rapidly with increasing distance from the powder surface. With both methods, the extent of contribution from various depths of a powder sample to the visible-NIR diffuse reflection signal is characterized. This information is valuable for validation of analytical applications of diffuse reflectance visible-NIR spectrometry.     

Miniaturized and automated sample pretreatment for determination of PCBs in environmental aqueous samples using an on-line microporous membrane liquid-liquid extraction-gas chromatography system

A new, fast, and automated sample pretreatment technique for determination of lipophilic organic compounds in aqueous samples has been developed and applied to the determination of polychlorinated biphenyls (PCBs) in environmental river water. It is based on miniaturized microporous membrane liquid-liquid extraction coupled on-line to gas chromatography (GC) with electron capture detection. The heart of the system that simultaneously connects the sample pretreatment step to the final GC analysis has been named the extracting syringe (ESy). The ESy carries a miniaturized membrane extraction card attached to an electrically and mechanically designed installment and is mounted directly over a GC injector for fully automated injection of the extract. A method was developed to extract 10 PCB congeners from 1-mL water samples (after addition of 40% acetonitrile) with an extraction time of 10 min. The optimized methodology showed good linearity (in the dynamic concentration range of 5 ng L(-)(1)-1 microg L(-)(1)), enrichment factors of 33-40 times, repeatable extractions (RSD 2-5%, n = 4), and low detection limits (2-3 ng L(-)(1)). Acetonitrile had to be added to the samples in order to overcome the influence of PCB adsorption on the repeatability of extraction and enrichment and to minimize the overall memory effect (OME). OME and carryover depended not only on the concentration of the organic solvent added to the sample and that used in the washing procedure but also on whether the extracting card was changed or not. When an optimized washing procedure was applied, the OME was approximately 0.2% at high concentrations (i.e., 1 microg L(-)(1)). When each extraction took place in a new extraction card, no OME was detected. Additionally, no significant adsorption onto glass surfaces or a matrix effect on extraction was noticed. The main features of this methodology are good extraction repeatability, low detection limits at short extraction time, and the unsurpassed characteristic of no detectable OME in the entire system when each sample is processed in a new card. The total consumption of organic (nonchlorinated) solvents is less than 5 mL per sample.     

Co-development and composite clusters--the secular strength of Nordic telecommunications

During the 1980s and 1990s Finland and Sweden were on the internationalfrontier in telecommunications, pioneering the first-generationcellular system and leading in the development of the secondgeneration. This strength in telecommunications has developedunder various regulatory regimes in a complex industrial history,going back to the nineteenth century. To account for this Fenno-Swedishtelecom trajectory, the article starts out with Porter's modelof industrial competitiveness and theories of public procurement,and then focus the attention and analysis in two directions:(i) the historical role of advanced, research-intensive usersand competitive public–private development pairs; and(ii) the emergence and significance of a composite binationalclusters and their local agglomerations in the accelerated industrygrowth in the 1990s.     

A brief history of mobile communication in Europe

Since the introduction of mobile telephony in the early 1950s in Europe, US and Japan the demand for this service exploded. It seems that the latent demand for mobile telecommunication services for decade’s continued to be very strong. After the introduction of cellular technology the capacity of the services became able to meet the massive demand. Next and future generations of mobile telecommunication technologies bring increased transmission speed and more versatile services. This forces network operators to organise multi sourced information flows supplied by service providers to increase the network effect of the system instead of providing the network infrastructure and leave the content to the users as in pure voice telephony. The drivers and inhibitors behind the emergence and recent developments of mobile telecommunications systems in Europe, are highlighted in this paper. Liberalisation of the telecom markets in Europe drove new entrants to the market and curbed excessive pricing. However, in recent years the lack of challenging service is the main cause for the wavering development of newer generations of mobile telecommunication services.     

Weldability Aspects of a Newly Developed Duplex Stainless Steel LDX 2101

Duplex grades have, due to balanced chemical compositions of both filler and base metals, a weldability that allows for successful welding using a majority of the technically relevant techniques of today. In order to fulfil the performance requirements several aspects must be considered. In the heat affected zone (HAZ) the austenite reformation must be reasonably high and in the weld metal the microstructure must be stable so that e.g. high productivity welding and multi‐pass welding are possible, without precipitation of detrimental phases in previous passes. This paper addresses the effect of alloying elements and thermal cycles on phase balance in the high temperature HAZ (HTHAZ) of the newly developed lean duplex grade LDX 2101 (EN 1.4162, UNS S32101). Bead‐on‐plate welds and simulated weld structures have been produced and investigated using metallography, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results are analysed using the thermodynamic database Thermo‐Calc and a model for phase transformation based on a paraequilibrium assumption for ferrite‐austenite transformation. In the temperature region outside the paraequilibrium domain, growth controlled by diffusion of substitutional elements was considered. The analysis follows a model by Cahn regarding grain boundary nucleated growth and the Hillert‐Engberg model on kinetics of spherical and planar growth.     

Zeugung, Entwicklung, Evolution

Ohne Zusammenfassung     

Phase-Field Modeling of Sigma-Phase Precipitation in 25Cr7Ni4Mo Duplex Stainless Steel

Phase-field modeling is used to simulate the formation of sigma phase in a model alloy mimicking a commercial super duplex stainless steel (SDSS) alloy, in order to study precipitation and growth of sigma phase under linear continuous cooling. The so-called Warren–Boettinger–McFadden (WBM) model is used to build the basis of the multiphase and multicomponent phase-field model. The thermodynamic inconsistency at the multiple junctions associated with the multiphase formulation of the WBM model is resolved by means of a numerical Cut-off algorithm. To make realistic simulations, all the kinetic and the thermodynamic quantities are derived from the CALPHAD databases at each numerical time step, using Thermo-Calc and TQ-Interface. The credibility of the phase-field model is verified by comparing the results from the phase-field simulations with the corresponding DICTRA simulations and also with the empirical data. 2D phase-field simulations are performed for three different cooling rates in two different initial microstructures. A simple model for the nucleation of sigma phase is also implemented in the first case. Simulation results show that the precipitation of sigma phase is characterized by the accumulation of Cr and Mo at the austenite-ferrite and the ferrite-ferrite boundaries. Moreover, it is observed that a slow cooling rate promotes the growth of sigma phase, while a higher cooling rate restricts it, eventually preserving the duplex structure in the SDSS alloy. Results from the phase-field simulations are also compared quantitatively with the experiments, performed on a commercial 2507 SDSS alloy. It is found that overall, the predicted morphological features of the transformation and the composition profiles show good conformity with the empirical data.