Ammonia emissions after application of human urine to a clay soil for barley growth

Important amounts of plant nutrients excreted by humans are found in human urine. This provides the motivation for separating urine and recycling it, as fertiliser, back to agricultural land for food or fodder production. There are some housing estates in Sweden, both blocks of flats and separate houses, in which urine-separating toilets have been installed. The urine is stored in covered basins and spread on agricultural land. The objective of the present study was to evaluate the influence of application rate, application techniques and time on NH₃ emissions after application of source-separated human urine. Human urine was spread at different application rates (10, 20 and 60 Mg ha^–1) before sowing (year 1 to 3) and when the barley crop was 20-30 cm high (year 2). Urine was spread with a plot spreader using two band-application techniques (with bands 0.25 m apart): trailing hoses and trailing shoes. In spring, band-spread urine with trailing hoses was incorporated with a harrow four hours after application. The four (year 1 and 3) or six (year 2) treatments were organised into a randomised block design with three replicates. An equilibrium concentration method was used for measuring ammonia emissions directly after application. After spring application with trailing hoses and harrowing after four hours, the nitrogen [N] loss as ammonia [NH₃], average over 3 years, was 5% of the applied N, irrespective of the application rate. The largest loss (10% of the applied N) was measured after application of 60 t of urine per hectare in spring. Hardly any NH₃ loss occurred after incorporation with a harrow, with the exception of the highest application rate. Loss of NH₃ was very low, close to 1% of the applied N, when the urine was incorporated directly into the soil in spring by band application with trailing shoes. Virtually no emissions were detected when the urine was applied to the growing crop, neither by trailing hoses nor by trailing shoes. This study shows that it is possible to apply human urine on bare soil or in growing barley crop with very low losses of N as NH₃. Together with careful handling and the use of covered storage, nutrients in human urine could be recycled from households to agricultural land with low NH₃ emissions.     

Monoclonal behavior of molecularly imprinted polymer nanoparticles in capillary electrochromatography

A new approach based on miniemulsion polymerization is demonstrated for synthesis of molecularly imprinted nanoparticles (MIP-NP; 30-150 nm) with "monoclonal" binding behavior. The performance of the MIP nanoparticles is characterized with partial filling capillary electrochromatography, for the analysis of rac-propranolol, where (S)-propranolol is used as a template. In contrast to previous HPLC and CEC methods based on the use of MIPs, there is no apparent tailing for the enantiomer peaks, and baseline separation with 25,000-60,000 plate number is achieved. These effects are attributed to reduction of the MIP site heterogeneity by means of peripheral location of the core cross-linked NP and to MIP-binding sites with the same ordered radial orientation. This new MIP approach is based on the substitution of the functional monomers with a surfactant monomer, sodium N-undecenoyl glycinate (SUG) for improved inclusion in the MIP-NP structure and to the use of a miniemulsion in the MIP-NP synthesis. The feasibility of working primarily with aqueous electrolytes (10 mM phosphate with a 20% acetonitrile at pH 7) is attributable to the micellar character of the MIP-NPs, provided by the inclusion of the SUG monomers in the structure. To our knowledge this is the first example of "monoclonal" MIP-NPs incorporated in CEC separations of drug enantiomers.     

Assessment of the mean and variance of the random regular transmittance through a dispersion of large cylinders using numerical simulations

In two previous papers [J. Opt. Soc. Am. A15, 1698 (1998)JOAOD60740-323210.1364/JOSAA.15.001698; J. Opt. Soc. Am. A16, 2737 (1999)JOAOD60740-323210.1364/JOSAA.16.002737] the theory of fluctuations in the regular transmittance T through a flowing dispersion of large slender cylindrical particles was presented. The theory covers, among other things, expressions for the expected value muT and the variance sigma(T)(2) of T in the two extreme cases when the cylinders are much shorter or much longer than the diameter of the optical beam used. Intermediate lengths were not treated. Numerical simulation is used to demonstrate the random behavior of T for intermediate cylinder lengths. The simulation results are consistent with the theory and provide a reliable estimate of the measurements produced by this analysis process. The result of the simulation is summarized as a fitted Bézier function model. The advantage of the simulation lies primarily in estimating measurement errors caused by the presence of intermediate length particles in measurement applications.     

Dissolution and precipitation behavior of ternary solid dispersions of ezetimibe in biorelevant media

Abstract

The effects of different formulations and processes on inducing and maintaining the supersaturation of ternary solid dispersions of ezetimibe (EZ) in two biorelevant media fasted-state simulated intestinal fluid (FaSSIF) and fasted-state simulated gastric fluid (FaSSGF) at different temperatures (25?°C and 37?°C) were investigated in this work.

Ternary solid dispersions of EZ were prepared by adding polymer PVP-K30 and surfactant poloxamer 188 using melt-quenching and spray-drying methods. The resulting solid dispersions were characterized using scanning electron microscopy, differential scanning calorimetry (DSC), modulated DSC, powder X-ray diffraction and Fourier transformation infrared spectroscopy. The dissolution of all the ternary solid dispersions was tested in vitro under non-sink conditions.

All the prepared solid dispersions were amorphous in nature. In FaSSIF at 25?°C, the melt-quenched (MQ) solid dispersions of EZ were more soluble than the spray-dried (SD) solid dispersions and supersaturation was maintained. However, at 37?°C, rapid and variable precipitation behavior was observed for all the MQ and SD formulations. In FaSSGF, the melting method resulted in better solubility than the spray-drying method at both temperatures.

Ternary solid dispersions show potential for improving solubility and supersaturation. However, powder dissolution experiments of these solid dispersions of EZ at 25?°C may not predict the supersaturation behavior at physiologically relevant temperatures.     

Demonstration-based learning and control for automatic grasping

We present a method for automatic grasp generation based on object shape primitives in a Programming by Demonstration framework. The system first recognizes the grasp performed by a demonstrator as well as the object it is applied on and then generates a suitable grasping strategy on the robot. We start by presenting how to model and learn grasps and map them to robot hands. We continue by performing dynamic simulation of the grasp execution with a focus on grasping objects whose pose is not perfectly known.     

The kinetics of ettringite formation and dilatation in a blended cement with β-hemihydrate and anhydrite as calcium sulfate

The phase formation, heat of hydration and dilatation in a blended cement consisting of 50 wt.% calcium aluminate cement, 25 wt.% Portland cement and 25 wt.% calcium sulfate were studied (w/c=1). The calcium sulfate was β-hemihydrate, anhydrite and mixes of the two. Kinetic expressions describing the ettringite formation in the pastes with the pure calcium sulfates were found. Hydration reactions were suggested and the phase development was compared to the hydration heat by mass and heat balances. When the calcium sulfate was 75 and 50 wt.% β-hemihydrate, the systems behaved as a linear combination of the 100 and 0 wt.% blends. At 25 wt.%, the hydration kinetics differed from the other blends. With only β-hemihydrate, the last 50% of ettringite formation was accompanied by expansion, mainly caused by interaction of crystals growing radially on cement grains. In the paste with only anhydrite, ettringite crystals grew in solution and produced no expansion.     

Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry

The motion of the liquid front during impregnation of non-crimp fabrics has been considered by using Sethian’s level set method. Particular attention is put on the creation of bubbles at the liquid front and a virtual 3D model mimicking biaxial fabrics has been built for this purpose. The saturated fluid flow is governed by the Navier–Stokes Equations and Darcy law, while capillary pressure has been accounted for at the liquid flow front and continuity maintained. The influence of perturbation in the bundle geometry has been investigated. Local correlations of the dimensions of neighbouring gaps formed between the bundles are of paramount importance. Focus is on inter-bundle bubbles. An existing model for bubble dynamics is used based on a probabilistic approach for bubbles moving, splitting, merging, and dissolving. The same approach was used for intra-bundle bubbles, the difference being that their motion appears to be much slower. The obtained void fractions of inter-bundle bubbles at different vacuum levels applied at the liquid flow front are compared to those from real mouldings with a high degree of conformity.     

High shear wet granulation modelling—a mechanistic approach using population balances

A population balance approach based on splitting the coalescence kernel into two factors, the first describing the collision frequency of particles and the second describing the collision efficiency, is applied to modelling wet granulation in a high shear mixer. Four different expressions for the collision frequency are compared and discussed. The kernels are the size independent kernel, the shear kernel proposed by Smoluchowski [M. Smoluchowski, “Versuch einer matematischen Theorie der Koagulationskinetic kolloider Lösungen”, Z. Physik. Chem. 92, (1917) 129–168.] and the two kernels proposed by Hounslow [M.J. Hounslow, “The population balance as a tool for understanding particle rate processes”, Kona (1998) 179–193.], i.e. the EKE kernel and the less used kernel based on equipartition of fluctuating translational momentum (ETM kernel). Microcrystalline cellulose (mcc) is granulated under different process conditions and it is found that the ETM kernel best describes the granulation at higher impeller speeds, whereas the EKE kernel gives better agreement at lower impeller speeds. The collision efficiency is assumed to be a function of the liquid saturation. By using this assumption, it was possible to detect similar trends for the remaining part of the collision efficiency regardless of process conditions.     

Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

High friction and transfer of work material to tool surfaces constitute important industrial problems in forming of many metals and alloys. However, it is very hard to gain a deeper understanding of these phenomena by studying real forming operations. In this paper, we have tried to gain fundamental understanding by avoiding as much as possible of the complexity of real forming. This has been realised by studying the friction and material transfer between well-defined tool material surfaces; uncoated and DLC-coated tool steel, and a needle shaped austenitic stainless steel tip, in situ in the SEM. The tool materials were tested in two conditions; well polished and well polished with local intentional scratches. It was found that work material was immediately transferred to the tool steel surface. When passing an intentional scratch, the local transfer was on a much larger scale, and the friction was higher, but the effect was mostly local. For the polished DLC-coated surface, almost no work material was transferred and the friction was low. An intentional scratch in the polished DLC surface barely influenced the galling behaviour. The present results are discussed in the light of previously published results from an analogous study with aluminium as work material.