Berechnung und Optimierung von Geometrie und Eingriffsverhalten von Zahnformen beliebiger Achslage

The main benefit, the economical manufacturability of traditional gear profiles, such as an involute, are no longer of major importance in times of computer-aided design and production. Due to existing modern production techniques standard and more sophisticated gear types can be produced with high precision and maintainable financial effort. Especially for non-standard gear types modern gear production systems ensure high quality and reliability to the operator with regard to flank and meshing geometry. Depending on the context of application different gear types have advantages and disadvantages concerning load carrying capacity, effectiveness or noise excitation. Developing an optimized gearing for the desired application is thus a complex and elementary goal within the design process.     

CeO<Subscript>2</Subscript> and Co<Subscript>3</Subscript>O<Subscript>4</Subscript>–CeO<Subscript>2</Subscript> nanoparticles: effect of the synthesis method on the structure and catalytic properties in COPrOx and methanation reactions

CeO₂ and Co₃O₄–CeO₂ nanoparticles were synthesized, thoroughly characterized, and evaluated in the COPrOx reaction. The CeO₂ nanoparticles were synthesized by the diffusion-controlled precipitation method with ethylene glycol. A notably higher yield was obtained when H₂O₂ was used in the synthesis procedure. For comparison, two commercial samples of CeO₂ nanoparticles (Nyacol^®)—one calcined and the other sintered—were also studied. Catalytic results of bare CeO₂ calcined at 500 °C showed a strong influence of the method of synthesis. Despite having similar BET area values, the CeO₂ synthesized without H₂O₂ was the most active sample. Co₃O₄–CeO₂ catalysts with three different Co/(Co + Ce) atomic ratios, 0.1, 0.3, and 0.5, were prepared by the wet impregnation of the CeO₂ nanoparticles. TEM and STEM observations showed that impregnation produced mixed oxides composed of small CeO₂ nanoparticles located both over the surface and inside the Co₃O₄ crystals. The mixed oxide catalysts prepared with a cobalt atomic ratio of 0.5 showed methane formation, which started at 200 °C due to the reaction between CO₂ and H₂. However, above 250 °C, the reaction between CO and H₂ became important, thus contributing to CO elimination with a small H₂ loss. As a result, CO could be totally eliminated in a wide temperature range, from 200 to 400 °C. The methanation reaction was favored by the reduction of the cobalt oxide, as suggested by the TPR experiments. This result is probably originated in Ce–Co interactions, related to the method of synthesis and the surface area of the mixed oxides obtained.     

Effect of porosity and hydrostatic pressure on water absorption in a semicrystalline fluoropolymer

This paper discusses the effect of porosity and hydrostatic pressure on diffusion kinetics and equilibrium water uptake in a semicrystalline fluoropolymer. Water sorption experiments at atmospheric pressure and under water pressures up to 250 MPa were carried out during 18 months at 40 °C on reference and porous samples. Porosity of samples was induced due to a cavitation process occurring at the highest triaxiality area of waisted and notched specimens during tensile tests. Water uptake was found to be very sensitive to porosity, showing an increase in samples with a high void fraction. On the other hand, water content decreased with increasing pressure suggesting a compaction of the porous space in which water can be stored. Two models describing this water uptake behaviour were considered. The first is a classical model which assumes that sorption occurs only by diffusion following Fick’s law. Fick’s model was found to be in agreement with the experimental results. A “Langmuir-type” sorption model was also proposed to describe water uptake in porous samples, considering a two-phase water transport mechanism: one portion of the absorbed water diffuses through the polymer matrix and the other portion is stored in voids. This model was implemented in a user subroutine using ABAQUS? software and simulations were confronted to experimental sorption curves showing satisfactory agreements. The potential of the Langmuir-type sorption model resides on its availability to be coupled to a poro-mechanical model, in order to improve the understanding of coupling between the mechanical behaviour and water sorption mechanism in a porous polymer.     

The Grid Method for In‐plane Displacement and Strain Measurement: A Review and Analysis

The grid method is a technique suitable for the measurement of in‐plane displacement and strain components on specimens undergoing a small deformation. It relies on a regular marking of the surfaces under investigation. Various techniques are proposed in the literature to retrieve these sought quantities from images of regular markings, but recent advances show that techniques developed initially to process fringe patterns lead to the best results. The grid method features a good compromise between measurement resolution and spatial resolution, thus making it an efficient tool to characterise strain gradients. Another advantage of this technique is the ability to establish closed‐form expressions between its main metrological characteristics, thus enabling to predict them within certain limits. In this context, the objective of this paper is to give the state of the art in the grid method, the information being currently spread out in the literature. We propose first to recall various techniques that were used in the past to process grid images, to focus progressively on the one that is the most used in recent examples: the windowed Fourier transform. From a practical point of view, surfaces under investigation must be marked with grids, so the techniques available to mark specimens with grids are presented. Then we gather the information available in the recent literature to synthesise the connection between three important characteristics of full‐field measurement techniques: the spatial resolution, the measurement resolution and the measurement bias. Some practical information is then offered to help the readers who discover this technique to start using it. In particular, programmes used here to process the grid images are offered to the readers on a dedicated website. We finally present some recent examples available in the literature to highlight the effectiveness of the grid method for in‐plane displacement and strain measurement in real situations.     

A well‐conditioned and optimally convergent XFEM for 3D linear elastic fracture

A variation of the extended finite element method for three‐dimensional fracture mechanics is proposed. It utilizes a novel form of enrichment and point‐wise and integral matching of displacements of the standard and enriched elements in order to achieve higher accuracy, optimal convergence rates, and improved conditioning for two‐dimensional and three‐dimensional crack problems. A bespoke benchmark problem is introduced to determine the method's accuracy in the general three‐dimensional case where it is demonstrated that the proposed approach improves the accuracy and reduces the number of iterations required for the iterative solution of the resulting system of equations by 40% for moderately refined meshes and topological enrichment. Moreover, when a fixed enrichment volume is used, the number of iterations required grows at a rate which is reduced by a factor of 2 compared with standard extended finite element method, diminishing the number of iterations by almost one order of magnitude. Copyright © 2015 John Wiley & Sons, Ltd.     

Empirical Comparisons of X‐bar Charts when Control Limits are Estimated

A control chart is a very common tool used to monitor the quality of business processes. An estimator of the process variability is generally considered to obtain the control limits of a chart when parameters of the process are unknown. Assuming Monte Carlo simulations, this paper first compares the efficiency of the various estimators of the process variability. Two empirical measures used to analyze the performance of control charts are defined. Results derived from various empirical studies reveal the existence of a linear relationship between the performance of the various estimators of the process variability and the performance of charts. The various Monte Carlo simulations are conducted under the assumption that the process is in both situations of in‐control and out‐of‐control. Copyright © 2015 John Wiley & Sons, Ltd.