Towards high efficiency video coding: Subjective evaluation of potential coding technologies

This paper describes the details and the results of the subjective quality evaluation performed at EPFL, as a contribution to the effort of the joint collaborative team on video coding (JCT-VC) for the definition of the high efficiency video coding (HEVC) standard. The performance of twenty-seven coding technologies has been evaluated with respect to two H.264/MPEG-4 AVC anchors, for high definition (HD) test material. The test campaign involved a total of 494 naive observers and took place over a period of four weeks. While similar tests have been conducted as part of the standardization process of previous video coding technologies, the test campaign described in this paper is by far the most extensive in the history of video coding standardization. A detailed statistical analysis of the subjective results is provided. The results show high consistency and support an accurate comparison of the performance of the different coding technologies.     

Facile Fabrication of Ordered Crystalline‐Semiconductor Microstructures on Compliant Substrates

Buckling and wrinkling of thin films on a compliant material has proved to be a resource in several applications, such as flexible electronics, thin‐film metrology and fabrication of tunable optical components. A versatile approach for the fabrication of two‐dimensional and linear arrays of buckled structures is demonstrated here using a stiff material, in the form of a nanomembrane, on a compliant substrate. The novelty of the fabrication process is that the substrates are strained by isotropic volume expansion in solvents. This work illustrates in detail the potential of our technology to fabricate ordered arrays of 3D structures on large‐area compliant substrates, with important implications for a large number of fields. Furthermore, this paper discusses the interesting interface chemistry and mechanics leading to controllable and reproducible fabrication of our 3D structures.     

Carrier trapping in thin N2O-grown oxynitride/oxide di-layer for PowerMOSFET devices

A detailed study of the carrier trapping properties shown by the silicon/oxynitride/oxide gate layers in PowerVDMOS technologies is reported. A quantitative analysis of hole and electron trap densities versus the specific N₂O based nitridation process, extracted from Fowler–Nordheim constant current stress kinetics, allows a deep understanding of the role played by those defects in the susceptibility of every nitrided layer.     

Cross-layer network formation for energy-efficient IEEE 802.15.4/ZigBee Wireless Sensor Networks

In IEEE 802.15.4/ZigBee Wireless Sensor Networks (WSNs) a specific node (called the PAN coordinator or sink) controls the whole network. When the network operates in a multi-hop fashion, the position of the PAN coordinator has a significant impact on the performance: it strongly affects network energy consumption for both topology formation and data routing. The development of efficient self-managing, self-configuring and self-regulating protocols for the election of the node that coordinates and manages the IEEE 802.15.4/ZigBee WSN is still an open research issue. In this paper we present a cross-layer approach to address the problem of PAN coordinator election on topologies formed in accordance with the IEEE 802.15.4. Our solution combines the network formation procedure defined at the MAC layer by the IEEE 802.15.4 standard with a topology reconfiguration algorithm operating at the network layer. We propose a standard-compliant procedure (named PAN coordinator ELection – PANEL) to self-configure a IEEE 802.15.4/ZigBee WSN by electing, in a distributed way, a suitable PAN coordinator. A protocol implementing this solution in IEEE 802.15.4 is also provided. Performance results show that our cross-layer approach minimizes the average number of hops between the nodes of the network and the PAN coordinator allowing to reduce the data transfer delay and determining significant energy savings compared with the performance of the IEEE 802.15.4 standard.     

Upconversion in Er-doped Gd2O3 nanocrystals prepared by propellant synthesis and flame spray pyrolysis

In this study, monoclinic luminescent Gd₂O₃ nanocrystals doped with different concentrations of Er³⁺ (0.1, 1, and 10 mol%) were produced by propellant synthesis and flame spray pyrolysis (FSP). A comparison of their optical and morphological properties is reported. Following 980 nm excitation, an increase of the emission intensity from the ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions was observed with increasing Er³⁺ concentration in the Gd₂O₃ nanocrystalline samples prepared via both techniques. However, the overall upconversion emission intensity was greater for the samples obtained by FSP. Furthermore, as the Er³⁺ concentration was increased, the intensity of the red (⁴F_9/2 → ⁴I_15/2) emission was observed to increase more rapidly in comparison to the green (²H_11/2, ⁴S_3/2 → ⁴I_15/2) emission resulting in an overall enhancement of the red component in the upconversion emission. Although both synthetic routes yield average crystallite sizes in the nanoscale, the TEM and SEM images confirm a more homogeneous morphology and lower particle aggregation for the nanocrystals produced by FSP.     

Evaluation of a child passenger safety class in increasing parental knowledge

Background

Child passenger restraint systems have been found to greatly reduce the risk of injury and death among child passengers. However, nearly half of the children who died in 2009 as a result of motor vehicle crashes were completely unrestrained. Our global hypothesis is that parents and other caregivers failed to restrain children due to a lack of child passenger seat education and practice. In this report, we postulate that a car seat class will improve the basic understanding of child passenger safety. The objective of the study was to evaluate the effectiveness of a car seat class in increasing parental knowledge about child passenger safety.

Methods

Car seat classes were held at a Level 1 pediatric trauma center every other Tuesday for ten months. The curriculum consisted of: child passenger safety laws discussion, a 21-min video on the use of child safety seats followed by a 15-min discussion about the video, 15 min of discussing the different types of car seats, and hands-on training on how to properly install and use child restraints. Free car seats were provided to eligible parents. The pre-test was administered at the beginning of class and the post-test at the end of the class. McNemar's test and a paired t-test were used to compare pre- and post-test scores. Test scores were also stratified by language spoken.

Results

Forty-four classes were held and a total of 491 parents/caregivers attended the classes. An increase in knowledge was found for all survey questions. Mean knowledge score for the post-test was 3.10 points higher compared to the mean knowledge score from the pre-test. Mean difference in knowledge scores for English-speaking participants were higher than Spanish-speaking participants.

Conclusion

Lack of knowledge and low risk perception have frequently been cited as barriers for the use of child passenger restraints. Our intervention attempted to eliminate these barriers. We found that this intervention was effective at increasing parental knowledge about child passenger safety. The results of this study may be used to design and implement future interventions in multicultural settings.     

Empowering Communities Through Design

Francesca Galeazzi is an architectural engineer who leads the sustainability team at Arup Associates in Shanghai. Here she looks back with hindsight from 2050, reflecting on how rapid urbanisation in China, which started in the 1990s, played out over the next half-century. She describes how the initial highly centralised, mass urbanisation programmes gave way to a more local and community-based, participatory approach to decision-making and planning, foreshadowed by some key legislation around land ownership and design for community-based planning models in the early 2010s.     

Reduced Levels of ABCA1 Transporter Are Responsible for the Cholesterol Efflux Impairment in β-Amyloid-Induced Reactive Astrocytes: Potential Rescue from Biomimetic HDLs

The cerebral synthesis of cholesterol is mainly handled by astrocytes, which are also responsible for apoproteins’ synthesis and lipoproteins’ assembly required for the cholesterol transport in the brain parenchyma. In Alzheimer disease (AD), these processes are impaired, likely because of the astrogliosis, a process characterized by morphological and functional changes in astrocytes. Several ATP-binding cassette transporters expressed by brain cells are involved in the formation of nascent discoidal lipoproteins, but the effect of beta-amyloid (Aβ) assemblies on this process is not fully understood. In this study, we investigated how of Aβ_1-42-induced astrogliosis affects the metabolism of cholesterol in vitro. We detected an impairment in the cholesterol efflux of reactive astrocytes attributable to reduced levels of ABCA1 transporters that could explain the decreased lipoproteins’ levels detected in AD patients. To approach this issue, we designed biomimetic HDLs and evaluated their performance as cholesterol acceptors. The results demonstrated the ability of apoA-I nanodiscs to cross the blood–brain barrier in vitro and to promote the cholesterol efflux from astrocytes, making them suitable as a potential supportive treatment for AD to compensate the depletion of cerebral HDLs.     

Active Materials for 3D Printing in Small Animals: Current Modalities and Future Directions for Orthopedic Applications

The successful clinical application of bone tissue engineering requires customized implants based on the receiver’s bone anatomy and defect characteristics. Three-dimensional (3D) printing in small animal orthopedics has recently emerged as a valuable approach in fabricating individualized implants for receiver-specific needs. In veterinary medicine, because of the wide range of dimensions and anatomical variances, receiver-specific diagnosis and therapy are even more critical. The ability to generate 3D anatomical models and customize orthopedic instruments, implants, and scaffolds are advantages of 3D printing in small animal orthopedics. Furthermore, this technology provides veterinary medicine with a powerful tool that improves performance, precision, and cost-effectiveness. Nonetheless, the individualized 3D-printed implants have benefited several complex orthopedic procedures in small animals, including joint replacement surgeries, critical size bone defects, tibial tuberosity advancement, patellar groove replacement, limb-sparing surgeries, and other complex orthopedic procedures. The main purpose of this review is to discuss the application of 3D printing in small animal orthopedics based on already published papers as well as the techniques and materials used to fabricate 3D-printed objects. Finally, the advantages, current limitations, and future directions of 3D printing in small animal orthopedics have been addressed.     

Validation of a Cleanroom Compliant Sonication-Based Decellularization Technique: A New Concept in Nerve Allograft Production

Defects of the peripheral nervous system are extremely frequent in trauma and surgeries and have high socioeconomic costs. If the direct suture of a lesion is not possible, i.e., nerve gap > 2 cm, it is necessary to use grafts. While the gold standard is the autograft, it has disadvantages related to its harvesting, with an inevitable functional deficit and further morbidity. An alternative to autografting is represented by the acellular nerve allograft (ANA), which avoids disadvantages of autograft harvesting and fresh allograft rejection. In this research, the authors intend to transfer to human nerves a novel technique, previously implemented in animal models, to decellularize nerves. The new method is based on soaking the nerve tissues in decellularizing solutions while associating ultrasounds and freeze–thaw cycles. It is performed without interrupting the sterility chain, so that the new graft may not require post-production γ-ray irradiation, which is suspected to affect the structural and functional quality of tissues. The new method is rapid, safe, and inexpensive if compared with available commercial ANAs. Histology and immunohistochemistry have been adopted to evaluate the new decellularized nerves. The study shows that the new method can be applied to human nerve samples, obtaining similar, and, sometimes better, results compared with the chosen control method, the Hudson technique.