On the nature of the active state of silver during catalytic oxidation of methanol

Under the applied high reaction temperatures (900 K) the Ag surface is restructured and a tightly held oxygen species is formed on the surface (O) apart from O atoms dissolved in the bulk (O). Methanol oxidation to formaldehyde proceeds through this O species as demonstrated by application of a variety of spectroscopic techniques.     

Preparation and characterization of a number of amine salts of long-chain fatty acids

Summary Eighty-eight amine salts of long-chain fatty acids have been prepared, purified by solvent crystallization, and characterized. Forty-five of these were salts of palmitic acid. The rest included salts of capric, lauric, myristic, stearic, oleic, elaidic, and 12-hydroxystearic acids. A variety of aliphatic, aromatic, and heterocyclic amines, including primary, secondary, and tertiary amines, were investigated. The majority of these gave 1∶1 acid-amine compounds on solvent recrystallization of an equimolar mixture of acid and amine. Some of the amines gave no crystallizable salt, and with others the pure salt could not be obtained by this procedure. Under the same conditions the symmetrical alkyl, substituted alkyl, and aralkyl secondary amines investigated gave crystallizable compounds containg two molecules of fatty acid to one of amine. Molecular compounds of 2-aminopyridine with four molecules of saturated fatty acid were formed by recrystallization starting with a 1 to 4 amine-acid mixture. Surface-tension measurements were made for aqueous solutions of a few of the amine salts. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U. S. Department of Agriculture.     

Fatty acid morpholides as plasticizers for vinyl chloride resins. III. Ternary compatibility-composition diagrams for the oleic-linoleic-stearic and oleic-linoleic-palmitic systems

A systematic investigation has been made of the effect of fatty acid composition on the compatibility of the corresponding mixed morpholides as plasticizers for vinyl chloride-vinyl acetate copolymer resins. Plasticizer evaluation data were obtained for the morpholides of lauric, palmitic, elaidic, and epoxyoleic acids and compared with the literature values for other fatty acid morpholides and morpholide mixtures. Ternary compatibility-composition diagrams have been constructured for the oleic-linoleic-stearic and the oleic-linoleic-palmitic morpholide systems. These diagrams make it possible to predict what adjustment, if any, must be made in the composition of any mixture of these fatty acids so that the corresponding morpholide mixture will be compatible. The diagrams will be useful in selecting the most appropriate and economical fatty acid sources from which to make compatible morpholide mixtures. Presented at the 52nd Annual Meeting, American Oil Chemists’ Society, St. Louis, Mo., May 1–3, 1961. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U.S. Department of Agriculture.     

Carbon fiber structure and stability studies

A study has been made of the thermal-oxidative stability of several commercially available carbon fibers. Significant differences in the weight loss behavior were observed in air aging studies run on the bare fibers at 600°F (589 K). The stability of high temperature laminates, such as those based on NR-150 polyimide precursor solutions, was found to be directly affected by the stability of the reinforcing carbon fibers. In studies carried out to determine the reasons for carbon fiber instability, residual sodium sulfate was found to be the principle destabilizing factor. A mechanism whereby the sodium sulfate promotes the oxidation of carbon in the presence of air is proposed.     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

Study of rotational mobility of stable nitroxide radicals in solid polymers

The rotational mobility of stable nitroxide radicals in PS, PMMA, PVC, PP and PE has been studied over a wide temperature range by the e.s.r. method. At temperatures T lower than T_g, spin probes act as kinetically independent particles, the rotational frequency of which is deter mined mainly by the micropore dimensions of the polymer and depends indirectly on the mobility of segments or side groups.     

13C- and 23Na-NMR investigations on alkali cellulose

Summary Solid state ²³Na- and ¹³C-NMR spectra of alkali cellulose are presented as a function of NaOH-concentration of the steeping lye, steeping temperature and amount of adhering lye (press factor). Results are discussed with regard to chemical binding of NaOH to the cellulose chain in the system cellulose/ NaOH/H₂O.Presented at the 22nd Microsymposium, Characterization of Structure and Dynamics of Macromolecular Systems by NMR Methods, Prague, CSSR, July 20–23,1981     

Improved bibliographic reference parsing based on repeated patterns

Parsing details like author names and titles out of bibliographic references of scientific publications is an important issue that has received considerable attention recently. However, most existing techniques are tailored to the highly standardized reference styles used in the last two to three decades. They do not perform well with the wide variety of reference styles used in older, historic publications. Thus, they are of limited use when creating comprehensive bibliographies covering both historic and contemporary scientific publications. This paper presents a generic approach to bibliographic reference parsing, named RefParse, which is independent of any specific reference style. Its core feature is an inference mechanism that exploits the regularities inherent in any list of references to deduce its format. In addition, our approach learns names of authors, journals, and publishers to increase the accuracy in scenarios where human users double check parsing results to increase data quality. Our evaluation shows that our approach performs comparably to existing ones with contemporary reference lists and also works well with older ones.     

Oxidation of pyrite in coal to magnetite

When bituminous coal is heated in an inert atmosphere (He) containing small amounts of oxygen at 393–455 °C, pyrite (FeS₂) in coal is partially converted to magnetite (Fe₃0₄). The maximum amount of Fe₃0₄ formed during the time of heating corresponds to 5–20% of the total pyrite present, depending on the coal sample. The magnetite forms as an outer crust on the pyrite grains. The fact that the magnetic properties of the pyrite grains are substantially increased by the magnetite crust suggests that pyrite can be separated from coal by use of a low magnetic field. In a laboratory test, 75% removal is obtained by means of a 500 Oe magnet on three samples, and 60% on a fourth sample.