Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

Implementation of sustainable sanitation in existing urban areas: long-term strategies for an optimised solution.

If technologies for decentralised sanitation and reuse (DESAR) and for natural stormwater management should at least partially replace existing systems, then intensive reconstruction work becomes essential. A conversion can only be realised successively over a long period due to high construction and financial expenses and requires new strategies. This paper presents the development and practical implementation of a mathematical tool to find an optimised strategy for the realisation of alternative and more decentralised drainage and sanitation concepts in existing urban areas. The succession of construction measures (e.g. the implementation of decentralised greywater recycling) for the whole period of consideration is determined based upon a mathematical optimisation model on the condition that the favoured future state is known. The model describes the complex interdependencies of the urban water and nutrient cycle and enables the minimisation of both financial efforts and ecological impacts on the way toward the future state. The results of the implementation for a rural area in Germany show that the mathematical optimisation is an adequate instrument to support decision-making processes in finding strategies for the realisation of sustainable urban water management.     

Correlation between left ventricular hypertrophy and GAA trinucleotide repeat length in Friedreich's ataxia

BACKGROUND: Friedreich's ataxia (FA), the most common inherited ataxia, is associated frequently with cardiac hypertrophy, and death is often cardiac related. Recently, the disease has been associated with a mutation that consists of an unstable expansion of GAA repeats in the first intron of the gene encoding frataxin on chromosome 9. METHODS AND RESULTS: We studied 44 consecutive patients with FA, determined the size of GAA expansions in the frataxin gene, and examined the relation between the genotype and cardiac phenotype assessed by M-mode and two-dimensional echocardiography. All the patients were homozygous for the mutation. The size of the GAA expansion on the smaller allele varied from 270 to 1200. We found a correlation between the size of GAA expansion and the left ventricular wall thickness (r = .51, P < .001) and the left ventricular mass index (r = .45, P = .002). Left ventricular hypertrophy was observed in 81% of patients with a number of GAA repeats above the median value of 770 compared with only 14% in the other group (P = .002). CONCLUSIONS: These data demonstrate that in FA, the severity of left ventricular hypertrophy is related to the number of GAA repeats. These results suggest that abnormalities of the gene encoding frataxin, a protein of unknown function highly expressed in the normal heart, may play an important role in the modulation of cardiac hypertrophy.     

Schnelle Lochkorrosion durch ungewöhnliche Anodenstabilisierung in einem Stahl/Wasser-System

Fast pitting corrosion in a steel/water system as a result of unusual stabilization of anodes Corrosion damage as a result of fast pitting was observed in industrial equipment made of unalloyed steel. The rate of formation and the manifestation of the pits are similar to pitting corrosion of stainless steels. Estimation of the kinetics of the localized corrosion in terms of differential aeration cells led to a model which indicates the stabilization of small anodic regions. The stabilization was caused by precipitation of the products of reaction between ferrous ions and polymeric silicate. The high rate of pitting also suggests that the oxygen entering the system during service periods involving the exposure of the system to air has enhanced the corrosion. These ideas could be substantiated by experiments, which also revealed particularly the effect of the concentration of NaCl. Anodic passivation by the addition of Na₂CO₃ or perhaps inhibition may be considered as candidate protective measures.     

Runoff and infiltration characteristics of pavement structures--review of an extensive monitoring program.

The stormwater runoff and infiltration performance of permeable pavements has been systematically evaluated within an intensive monitoring program. The primary objective of the investigation was to generate a broad database, which enables the development of an advanced simulation module for urban drainage modelling. Over 160 field and lab scale experiments have been completed and analyzed for surface runoff and infiltration characteristics. The test series include several pavement types under various boundary conditions such as diverse precipitation impacts, varying surface slope and layer construction as well as different stages of surface clogging and several base and subgrade layer characteristics. The results represent a reliable and comprehensive database that allows profound conclusions and substantial recommendations.     

The stability of duplexes involving AT and/or G4EtC base pairs is not dependent on their AT/G4EtC ratio content. Implication for DNA sequencing by hybridization

Sequencing by the recently reported hybridization technique requires the formation of DNA duplexes with similar stabilities. In this paper we describe a new strategy to obtain DNA duplexes with a thermal stability independent of their AT/GC ratio content. Melting data were acquired on 35 natural and 27 modified duplexes of a given length and of varying base compositions. Duplexes built with AT and/or G4EtC base pairs exhibit a thermal stability restrained to a lower range of temperature than that of the corresponding natural compounds (16 instead of 51 degrees C). The 16 degrees C difference in thermal stability observed between the least stable and the most stable duplex built with AT and/or G4EtC base pairs is mainly due to the sequence effect and not to their AT/G4EtC ratio content. Thus N -4-ethyl-2'-deoxycytidine (d4EtC) hybridizes specifically with natural deoxyguanosine leading to a G4EtC base pair whose stability is very close to that of the natural AT base pair. Oligonucleotide probes involving d4EtC can be easily prepared by chemical synthesis with phosphoramidite chemistry. Modified DNA targets were successfully amplified by random priming or PCR techniques using d4EtCTP, dATP, dGTP and dTTP in the presence of DNA polymerase. This new system might be very useful for DNA sequencing by hybridization.     

Fracture toughness evaluation by tensile and charpy-type tests based on micromechanical models of materials

With the aim of applying micromechanical approaches to fracture mechanics, we carried out dynamic tensile tests and instrumented impact tests with Charpy-type specimens both with a V-shaped notch and with a crack. We compared two micromechanical strain-rate-dependent models based on a modified Gurson flow function by simulating various dynamically loaded specimens. The results of the tests indicate that the critical void volume fractionf _c and the characteristic lengthl _c are practically independent of the strain rate and the geometry of the specimen. The behavior of the specimens subjected to strains and fracture can be characterized by the parameters determined in tensile tests and impact tests with the Charpy-type specimens. By the three-dimensional analysis based on the strain-rate-dependent Gurson model, we predict the onset of crack growth inside the Charpy specimen.Fraunhofer Institut für Werkstoffmechanic, Freiburg, Deutschland. Published in Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 30, No. 2, pp. 77–84, March–April, 1994.     

Fast point spread function computation from aperture functions in high-resolution positron emission tomography

The problem of extracting point spread functions from detector aperture functions in high-resolution PET is addressed. In the limit of very small size detectors relative to the ring dimensions, assumptions are made that lead to a fast and simple computation model yielding point spread functions with negligible errors due to the reconstruction algorithm. The methods allows one to assess accurately the intrinsic performance of a PET tomograph, and it appears to be adequate to relate the imaging capabilities in every point of the camera reconstruction field to the geometric and physical characteristics of the detection system. The method was developed as an investigation tool to help design the next generation of very-high-resolution PET tomographs.