FeO0.7F1.3/C Nanocomposite as a High‐Capacity Cathode Material for Sodium‐Ion Batteries

Searching high capacity cathode materials is one of the most important fields of the research and development of sodium‐ion batteries (SIBs). Here, we report a FeO_0.7F_1.3/C nanocomposite synthesized via a solution process as a new cathode material for SIBs. This material exhibits a high initial discharge capacity of 496 mAh g^?1 in a sodium cell at 50 °C. From the 3^rd to 50^th cycle, the capacity fading is only 0.14% per cycle (from 388 mAh g^?1 at 3^rd the cycle to 360 mAh g^?1 at the 50^th cycle), demonstrating superior cyclability. A high energy density of 650 Wh kg^?1 is obtained at the material level. The reaction mechanism studies of FeO_0.7F_1.3/C with sodium show a hybridized mechanism of both intercalation and conversion reaction.     

Influence of nitrogen uptake and heat treatment on the microstructural characteristics and corrosion performance of X190CrVMo20-4-1 steel produced by supersolidus liquid-phase sintering

Martensitic stainless steel powder exhibits a high nitrogen uptake when densified by supersolidus liquid-phase sintering in a nitrogen atmosphere, but the optimum uptake, which is beneficial to its resistance to corrosion, is unknown. In this study, the resistance of high-carbon martensitic stainless steel X190CrVMo20-4-1 densified in a nitrogen atmosphere against pitting corrosion was explored. This was to clarify the impact of nitrogen uptake in the steel matrix in the quenched and tempered condition on its corrosion resistance in an aqueous solution. Samples were subjected to potentiodynamic polarisation tests in a de-aerated, 1 wt% NaCl solution. Results revealed that the X190 steel densified in a nitrogen atmosphere at 40-kPa pressure, subjected to deep cryogenic treatment in liquid nitrogen at an austenitising temperature of 1150°C and tempered at 200°C, had the best pitting corrosion resistance with a breakdown potential of 142 ± 11 mV/SCE and a hardness of 738 ± 4 HV10. The matrix around the M₇C₃ carbides and MX carbonitrides suffered high pitting susceptibility. The implications of this study serve as a basis for the improvement of the functional properties of steels.     

Characterization of GPVI- or GPVI-CD39-Coated Nanoparticles and Their Impact on In Vitro Thrombus Formation

Traditional antithrombotic agents commonly share a therapy-limiting side effect, as they increase the overall systemic bleeding risk. A novel approach for targeted antithrombotic therapy is nanoparticles. In other therapeutic fields, nanoparticles have enabled site-specific delivery with low levels of toxicity and side effects. Here, we paired nanotechnology with an established dimeric glycoprotein VI-Fc (GPVI-Fc) and a GPVI-CD39 fusion protein, thereby combining site-specific delivery and new antithrombotic drugs. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles, NP-BSA, NP-GPVI and NP-GPVI-CD39 were characterized through electron microscopy, atomic force measurements and flow cytometry. Light transmission aggregometry enabled analysis of platelet aggregation. Thrombus formation was observed through flow chamber experiments. NP-GPVI and NP-GPVI-CD39 displayed a characteristic surface coating pattern. Fluorescence properties were identical amongst all samples. NP-GPVI and NP-GPVI-CD39 significantly impaired platelet aggregation. Thrombus formation was significantly impaired by NP-GPVI and was particularly impaired by NP-GPVI-CD39. The receptor-coated nanoparticles NP-GPVI and the bifunctional molecule NP-GPVI-CD39 demonstrated significant inhibition of in vitro thrombus formation. Consequently, the nanoparticle-mediated antithrombotic effect of GPVI-Fc, as well as GPVI-CD39, and an additive impact of CD39 was confirmed. In conclusion, NP-GPVI and NP-GPVI-CD39 may serve as a promising foundation for a novel therapeutic approach regarding targeted antithrombotic therapy.     

Specific cationic photoinitiators for near UV and visible LEDs: Iodonium versus ferrocenium structures

Two iodonium salts based on a coumarin chromophore are investigated for polymerization upon light emitting diode irradiations (LEDs). They work as one‐component photoinitiators. They initiate the cationic polymerization of epoxides (under air) and vinylethers (laminate) upon exposure to violet LEDs (385 and 405 nm). Excellent polymerization profiles are recorded. Their efficiency is quite similar to that of a ferrocenium salt. Interpenetrating polymer networks can also be obtained through a concomitant cationic/radical photopolymerization of an epoxy/acrylate blend monomer. The light absorption properties of these new salts as well as the involved photochemical mechanisms are investigated for the first time through electron spin resonance, laser flash photolysis, steady state photolysis experiments. Molecular orbital calculations are also used to shed some light on the initiation mechanisms. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42759.     

Efficacy of an advanced sewage treatment plant in southeast Queensland, Australia, to remove estrogenic chemicals

The estrogenicity profile of domestic sewage during treatment at a medium-sized (3800 EP) advanced biological nutrient removal plant in Queensland, Australia, was characterized using a sheep estrogen receptor binding assay (ERBA) and the MCF-7 breast cancer cell proliferation assay (E-Screen). The raw influent was highly estrogenic (20-54 ng/L EEq), and primary treatment resulted in a slight increase in estrogenicity that was detected in one of the assays (6-80 ng/L). Concurrent chemical analysis suggested that most of the estrogenicity in the influent was due to natural hormones (>48%). Secondary activated sludge treatment followed by nitrification/denitrification effectively removed > 95% of the estrogenic activity (to <0.75-2.6 ng/L), and estrogenicity of the final tertiary-treated effluent was below the detection limit of both assays (<0.75 ng/L).     

Long Distance Enhancement of Nonlinear Optical Properties Using Low Concentration of Plasmonic Nanostructures in Dye Doped Monolithic Sol–Gel Materials

Monolithic sol–gel silica composites incorporating platinum‐based chromophores and various types of gold nanoparticles (AuNPs) are prepared and polished to high optical quality. Their photophysical properties are investigated. The glass materials show well‐defined localized surface plasmon resonance (SPR) absorbance from the visible to NIR. No redshifts of the AuNP plasmon absorption peaks due to the increase in nanoparticle doping concentration are observed in the glasses, proving that no or very small SPR coupling effects occur between the AuNPs. At 600 nm excitation, but not at 532 nm, the AuNPs improve the nonlinear absorption performance of glasses codoped with 50 × 10^?3 m of a Pt‐acetylide chromophore. The glasses doped with lower concentrations of AuNPs (2–5 μm average distance) and 50 × 10^?3 m in chromophore, show a marked improvement in nonlinear absorption, with no or only small improvement for the more highly AuNP doped glasses. This study shows the importance of excitation wavelength and nanoparticle concentration for composite systems employing AuNPs to improve two‐photon absorption of chromophores.     

The relationship between environmental management systems and organizational innovations

This study provides empirical evidence of the nature of the relationship between environmental management systems and organizational innovations. Using a sample of Spanish manufacturing firms, the study reports on the implementation of the International Organization for Standardization (ISO) 14000 environmental quality standards and the relationship of such implementation with organizational innovations in the firm. The study presents several implications of interest for practitioners, academics, and policy makers. © 2012 Wiley Periodicals, Inc.     

The conformal alpha shape filtration

Conformal alpha shapes are a new filtration of the Delaunay triangulation of a finite set of points in ℝ^d. In contrast to (ordinary) alpha shapes the new filtration is parameterized by a local scale parameter instead of the global scale parameter in alpha shapes. The local scale parameter conforms to the local geometry and is motivated from applications and previous algorithms in surface reconstruction. We show how conformal alpha shapes can be used for surface reconstruction of non-uniformly sampled surfaces, which is not possible with alpha shapes.     

Protective Silica Coatings on Zinc-Sulfide-Based Phosphor Particles

A spray drying approach was used to apply 15-nm-thick SiO₂ continuous coatings onto ZnS:Ag phosphor particles. A prehydrolyzed TEOS dip coating formula was used as the SiO₂ precursor. The phosphor was mixed together with the precursor then atomized without allowing gelation to occur until the droplets containing the particles were in flight. The coating gelled and dried while falling through a graded heat zone. The dried coated particles were captured in a cyclone separator and heat-treated to further densify the SiO₂ coating. The coatings protected the phosphors while in service in field emission display (FED) devices.     

Establishment of a knee-joint coordinate system from helical axes analysis--a kinematic approach without anatomical referencing

This study establishes a functional knee-joint coordinate system (FCS) derived from active motion. The scale invariant properties of helical axes were used in order to avoid inter-observer errors associated with the traditional anatomical referencing techniques. The algorithm was tested with six cadaveric specimens in a knee-joint motion and loading apparatus. To determine the FCS sensitivity to variable loading, rotational moments were applied to the tibia while extending and flexing the knee. Each derived FCS was compared with the clinically derived anatomical coordinate system (ACS). The FCS was reproducible when the loading condition was the same. Changing the rotational moments from internal to external affected the orientations and the positions of the FCS. The largest displacement of 20.8 mm in average occurred in the medio/lateral direction. The FCS corresponded with the ACS for all specimens and loading conditions. The origin was always located within the femur along the transepicondylar line. The orientations differed less than 16.6 degrees in average, thus allowing the use of clinical terminology. These findings suggest that the FCS might improve the ability to clinically assess kinematic alterations provided that the reference motion is reproducible.