Cost-effective energy carriers for transport – The role of the energy supply system in a carbon-constrained world

The aim of this study is to examine how the options for producing electricity, fuels, and heat in a carbon-constrained world affect the cost-effectiveness of a range of fuels and propulsion technologies in the transportation sector. GET 7.0, a global energy system model with five end-use sectors, is used for the analysis. We find that an energy system dominated either by solar or by nuclear tends to make biofuels in plug-in hybrids cost-effective. If coal with carbon capture and storage (CCS) dominates the energy system, hydrogen cars, rather than plug-in hybrids tend to become cost-effective. Performing a Monte Carlo simulation, we then show that the general features of our results hold for a wide range of assumptions for the costs of vehicle propulsion technologies (e.g., batteries and fuel cells). However, sufficiently large changes in say the battery costs may overturn the impact of changes in the energy supply system, so that plug-in hybrid vehicles become cost-effective even if coal with CCS dominate the energy supply. We conclude that analyses of future energy carriers and propulsion technologies need to consider developments in the energy supply system.     

Emission control of nitrogen oxides in the oxy-fuel process

The interest in oxy-combustion as a method to capture carbon dioxide has increased drastically during recent years. The oxy-fuel process offers new process conditions and may take advantage of innovative techniques as well as of new ways to apply conventional measures for emission control. The present work reviews available techniques for controlling both the emission of nitrogen oxides (NO_x) to the atmosphere and the content of NO_x in the captured carbon dioxide. The results indicate that for a first generation of oxy-fuel power plants, conventional primary NO_x control should be sufficient to meet today's emission regulations, if based on emission per unit of fuel supplied. However, there are several opportunities for new methods of NO_x control in oxy-fuel plants, depending on future emission and storage legislation for carbon capture schemes. Improved understanding of the behaviour of nitric oxide and nitrogen dioxide during compression and condensation of carbon dioxide is needed, as well as improved knowledge on the influence of the parameters of oxy-combustion on nitrogen chemistry.     

The fourth generation broadband concept

Fixed-broadband access technology is evolving from exclusively copper-based solutions to hybrid fiber-copper architectures. This article presents the expected next step in the evolution of broadband systems, which we call the fourth-generation broadband concept. It identifies a technical, infrastructural, and economical niche and describes how the fiber-access network is extended and forked to feed a last and ultimate generation of DSL systems, shown to have gigabit potential. The underlying infrastructural concept is presented, economic aspects are described and discussed, and achievable data rates are calculated.     

Durability of concrete — Degradation phenomena involving detrimental chemical reactions

While interacting with its service environment, concrete often undergoes significant alterations that often have significant adverse consequences on its engineering properties. As a result, the durability of hydrated cement systems and their constituent phases has received significant attention from scientists and engineers. Cement paste deterioration by detrimental chemical reactions is discussed. First, the mechanisms that govern the transport of ions, moisture and gas are described. Then, different chemical degradation phenomena are reviewed. Microstructural alterations resulting from exposure to chlorides and carbon dioxide are discussed. Sulfate attack from external sources is described including processes resulting in the formation of ettringite and thaumasite. The mineralogy of Portland cement is sensitive to temperature and thermal cycling, particularly during the early hydration period.     

Scratch testing of metals and polymers: Experiments and numerics

An experimental and numerical study of the scratch test performed on metals and polymers was conducted. The materials tested, being both metallic and polymeric, were related to the well known Johnson’s parameter, often used to correlate indentation experiments. The aim was to determine whether it was possible to use the numerical approach presented by Wredenberg and Larsson [F. Wredenberg, P.-L. Larsson, On the numerics and correlation of scratch testing, Journal of Mechanics of Materials and Structures 2 (2006) 573–594] to describe the scratch mechanism and of course also to investigate whether or not important scratch quantities can be determined with sufficient accuracy from standard scratch experiments.     

Pre-Compensation for Rayleigh Fading Channels in Time Division Duplex OFDM Systems

Coherent demodulation results in good detection performance but requires channel estimation. Fading pre-compensation (precoding) at the transmitter can lead to low-complex receiver structures with good performance capabilities, without the need for channel estimation. Time division duplex systems based on orthogonal frequency division multiplex (OFDM) are particularly suited to this because intersymbol interference effects can be neglected, simplifying transmitter adjustments. Methods that involve amplitude and/or phase pre-compensation are compared in terms of resulting bit error rate and increase in peak-to-average power ratio. Dynamic channels degrade the performance as the block lengths get longer. For a certain block length the performance degrades below that of traditional differential decoding. A block length of up to 40 times that used in the Digital European Cordless Telephone system, DECT, is possible using channel estimation and ideal Wiener prediction.     

The influence of porous silicon on axonal outgrowth in vitro.

xonal outgrowth on smooth and porous silicon surfaces was studied in organ culture. The pore size of the silicon substrata varied between 100 and 1500 nm. We found that axons preferred to grow and elongate on porous silicon surfaces only when pores of (150-500 nm) are available.     

Impact of chloride on the mineralogy of hydrated Portland cement systems

Chloride ion is in part bound into ordinary Portland cement paste and modifies its mineralogy. To understand this a literature review of its impacts has been made and new experimental data were obtained. Phase pure preparations of Friedel's salt, Ca₄Al₂(Cl)_1.95(OH)_12.05·4H₂O, and Kuzel's salt, Ca₄Al₂(Cl)(SO₄)_0.5(OH)₁₂·6H₂O, were synthesized and their solubilities were measured at 5, 25, 55 and 85 °C. After equilibration, solid phases were analysed by X-ray diffraction while the aqueous solutions were analysed by atomic absorption spectroscopy and ion chromatography. The solid solutions and interactions of Friedel's salt with other AFm phases were determined at 25 °C experimentally and by calculations. In hydrated cements, anion sites in AFm are potentially occupied by OH, SO₄ and CO₃ ions whereas Cl may be introduced under service conditions. Chloride readily displaces hydroxide, sulfate and carbonate in the AFm structures. A comprehensive picture of phase relations of AFm phases and their binding capacity for chloride is provided for pH ∼ 12 and 25 °C. The role of chloride in AFt formation and its relevance to corrosion of embedded steel are discussed in terms of calculated aqueous [Cl⁻]/[OH⁻] molar ratios.     

Advanced mercury removal from gold leachate solutions prior to gold and silver extraction: a field study from an active gold mine in Peru

Mercury contamination in the Gold-Cyanide Process (GCP) is a serious health and environmental problem. Following the heap leaching of gold and silver ores with NaCN solutions, portions of the mercury-cyano complexes often adhere to the activated carbon (AC) used to extract the gold. During the electrowinning and retorting steps, mercury can be (and often is) emitted to the air as a vapor. This poses a severe health hazard to plant workers and the local environment. Additional concerns relate to the safety of workers when handling the mercury-laden AC. Currently, mercury treatment from the heap leach solution is nonexistent. This is due to the fact that chelating ligands which can effectively work under the adverse pH conditions (as present in the heap leachate solutions) do not exist. In an effort to economically and effectively treat the leachate solution prior to passing over the AC, a dipotassium salt of 1,3-benzenediamidoethanethiol (BDET2-) has been developed to irreversibly bind and precipitate the mercury. The ligand has proven to be highly effective by selectively reducing mercury levels from average initial concentrations of 34.5 ppm (parts per million) to 0.014 ppm within 10 min and to 0.008 ppm within 15 min. X-ray powder diffraction (XRD), proton nuclear magnetic resonance (1H NMR), Raman, and infrared (IR) spectroscopy demonstrate the formation of a mercury-ligand compound, which remains insoluble over pH ranges of 0.0-14.0. Leachate samples from an active gold mine in Peru have been analyzed using cold vapor atomic fluorescence (CVAF) and inductively coupled plasma optical emission spectroscopy (ICP-OES) for metal concentrations before and after treatment with the BDET2- ligand.