Enhancing the performance of solar cells via luminescent down-shifting of the incident spectrum: A review

The application of a luminescent down-shifting (LDS) layer has been proposed as a method for improving the poor spectral response (SR) of solar cells to short-wavelength light. The LDS layer absorbs photons, typically in the 300-500 nm range, and re-emits them at a longer wavelength where the photovoltaic (PV) device exhibits a significantly better response. This paper reviews the progress in this area over the last three decades, starting from early experiments that yielded promising results but being limited by the luminescent materials available at the time, to modern materials that exhibit higher luminescent quantum efficiencies and better photostability. The candidate materials are considered and their potential is reviewed for a wide range of PV technologies. A particular opportunity is the ability to use the existing polymer encapsulation layer of certain PV technologies as a LDS layer as well.     

The awareness and practice of value management by South African consulting engineers: Preliminary research survey findings

The awareness of value management (VM) and the nature and extent of its practice by professional civil, electrical and mechanical engineers in the South African construction industry are investigated using a web-based, online questionnaire survey as the first part of a more extensive investigation. A primary objective of the early study is to test the UK-based assertion of Kelly et al. [Kelly, J., Male, S., Graham, D., 2004. Value Management of Construction Projects. Blackwell, Oxford] that VM is an established service with commonly understood tools, techniques and styles. The survey findings suggest that, while awareness of VM is reasonably prevalent among South African engineers, its practice is considerably less extensive. Where VM is undertaken, almost no attempt is made to benchmark VM activities against international standards nor does its use appear to conform to any standard methodology. Engineers prefer other ways of delivering value to projects, and do not generally employ VM to facilitate the client briefing process. The findings are important given the increasing globalization of construction services, especially given the international ties between designers, project managers and other professionals. Professional engineering associations in South Africa should adopt a proactive role in promoting the use of VM by engineers, possibly through continuing professional development programmes.     

Making concentrated solar power competitive with coal: The costs of a European feed-in tariff

The European Union has yet to determine how exactly to reach its greenhouse gas emissions targets for the future. One potential answer involves large-scale development of concentrated solar power (CSP) in the North African region, transmitting the power to Europe. CSP is a relatively young and little utilized technology and is expensive when compared to other methods of generation. Feasibility studies have shown it is possible to generate enough power from CSP plants in Africa to spearhead the EUs climate goals. However, the costs of such a project are less well known. Currently, CSP must compete with low cost coal-fired electricity plants, severely hindering development. We examine the possible investment costs required for North African CSP levelized electricity cost to equal those of coal-fired plants and the potential subsidy costs needed to encourage growth until the technologies reach price parity. We also examine the sensitivity of investment and subsidies to changes in key factors. We find that estimates of subsidy amounts are reasonable for the EU and that sensitivity to such factors as perceived risk and learning rates would enable policy-makers to positively influence the cost of subsidies and time required for CSP to be competitive with coal.     

Membrane Effects in Biaxial Compression Tests

The effects of the confining membrane in laboratory tests on soil specimens have been the subject of numerous experimental, analytical, and numerical studies over the past half-century. This technical note expands the existing knowledge base by presenting a methodology and the associated results from an experimental study that has quantified the effect of the confining membrane in biaxial shear tests conducted on medium sand. The applicability of the method of biaxial tests on clay specimens is also presented. The results show that for both tests on sands and clays, the effect of the membrane on the shear stress on the failure plane are significant and should be accounted for in the interpretation of biaxial shear test results where localization occurs.     

Using the Schwinger inverse method for solutions of inverse transport problems in two-dimensional cylindrical geometries

The Schwinger method for solving inverse transport problems is applied to the problems of interface location identification, shield material identification, source isotope weight fraction identification, and material mass density identification (separately) in multilayered two-dimensional cylindrical gamma radiation source/shield systems. The method is iterative and estimates unknown interface locations, source isotope weight fractions, and material densities directly, while the unknown shield material is identified by estimating its total macroscopic gamma-ray cross sections. The energies of discrete gamma-ray lines emitted by the source are assumed to be known, while the unscattered flux of the lines is assumed to be measured at points external to the system. In numerical test cases, the Schwinger method correctly identifies the unknowns when the same deterministic ray-tracing code is used for both the parameter estimation process and simulation of the measured data. With realistic simulation of the measured data using a Monte Carlo code, the method produces more ambiguous results for interface location, shield material identification, and material density identification. The method works well for source weight fraction identification with measured data simulated by Monte Carlo. In addition to the application to more realistic (two-dimensional) problems, this paper extends previous work on the Schwinger inverse method by using surface formulas for unknown interface locations, automatic correction attempts for violated constraints, and ray-tracing instead of discrete-ordinates for transport calculations.     

Trace metal leaching behavior studied through the use of parametric modeling of water borne soil particles fractionated with a split-flow thin cell

Leaching of particle-bound metals affects the ability of settling ponds and other engineered structures to remove metallic pollutants, and leaching behavior is related to particle size. In this investigation, water borne soil particles were leached and fractionated with a split-flow thin cell, and the metal loadings were quantified as a function of particle size. For comparison of the metal-loading curves, different empirical modeling procedures were investigated to convert the data to a precise functional form suitable for quantitative comparison of changes in differential loading as a function of particle size. Results of this investigation are presented for a soil sample before and after leaching caused by simulated acid rain conditions. Following simulated acid rain leaching, the shape of the differential distribution curves change, and these changes reflect the particle size mediated leaching behavior. For the soil used in this demonstration, simulated acid rain leaching shifted the differential loading toward larger particle sizes, and the magnitude of the shift varied significantly among the metals. Because settling rate decreases as the square of particle size, this could potentially affect management decisions for settling ponds receiving these particles. The high precision afforded by the analysis allows the development of insight into the leaching mechanisms through comparing "partial" acid rain leaching with "total recoverable" leaching by EPA Method 3050.     

Quantification of 3-D field effects during 2-D microwave imaging

Two-dimensional (2-D) approaches to microwave imaging have dominated the research landscape primarily due to the moderate levels of measurement data, data-acquisition time, and computational costs required. Three-dimensional (3-D) approaches have been investigated in simulation, phantom, and animal experiments. While 3-D approaches are certainly important in terms of the potential to improve image quality, their associated costs are significant at this time. In addition, benchmarks are needed to evaluate these new generation systems as more 3-D methods begin to appear. In this paper, we present a systematic series of experiments which assess the capability of our 2-D system to image classical 3-D geometries. We demonstrate where current methods suffer from 3-D effects but also identify situations where they remain quite useful. Comparisons between reconstructions utilizing phantom measurements and simulated 3-D data are also shown to validate the results. These findings suggest that for certain biomedical applications, 2-D approaches remain quite attractive.