Fast-converging minimum frequency error RLS lattice filter for narrowband interference with discrete frequency steps

This paper discusses the fundamental convergence and frequency tracking properties of the recursive-least-squares (RLS) lattice filter in the presence of narrowband interference (NBI) whose frequency varies in discrete steps. It is shown for filters of this type, that the residual forward energy (RFE) after a frequency transition is a function of the input signal-to-noise ratio (SNR), separation of the sequential frequencies and the filter time constant and is exponentially decaying in nature. Reducing the RFE is important in removing unwanted transient artefacts from the desired signal. The convergence behaviour of the RLS algorithm based on a posteriori estimation errors is analysed under a number of conditions by varying the SNR and frequency step size. In order to limit the impact of the RFE while maintaining a minimum frequency tracking error in steady conditions, a fast-converging minimum frequency error (FCMFE) RLS lattice filter is suggested. For comparison, a least-mean-square (LMS) based gradient-adaptive lattice (GAL) filter is also analysed for this class of narrowband interference.     

Genetic marking shows that Ph+ cells present in autologous transplants of chronic myelogenous leukemia (CML) contribute to relapse after autologous bone marrow in CML

Relapse after autologous bone marrow transplantation for chronic myelogenous leukemia (CML) can be due either to the persistence of leukemia cells in systemic tissues following preparative therapy, or due to the persistence of leukemia cells in the autologous marrow used to restore marrow function after intensive therapy. To help distinguish between these two possible causes of relapse, we used safety-modified retroviruses, which contain the bacterial resistance gene NEO, to mark autologous marrow cells that had been collected from patients early in the phase of hematopoietic recovery after in vivo chemotherapy. The cells were then subjected to ex vivo CD34 selection following collection and 30% of the bone marrow were exposed to a safety-modified virus. This marrow was infused after delivery of systemic therapy, which consisted of total body irradiation (1,020 cGy), cyclophosphamide (120 mg/kg), and VP-16 (750 mg/m2). RT PCR assays specific for the bacterial NEO mRNA, which was coded for by the virus, and the bcr-abl mRNA showed that in two evaluable CML patients transplanted with marked cells, sufficient numbers of leukemia cells remained in the infused marrow to contribute to systemic relapse. In addition, both normal and leukemic cells positive for the retroviral transgenome persisted in the systemic circulation of the patients for at least 280 days posttransplant showing that the infused marrow was responsible for the return of hematopoiesis following the preparative therapy. This observation shows that it is possible to use a replication-incompetent safety-modified retrovirus in order to introduce DNA sequences into the hematopoietic cells of patients undergoing autologous bone marrow transplantation. Moreover, this data suggested that additional fractionation procedures will be necessary to reduce the probability of relapse after bone marrow transplantation in at least the advanced stages of the disease in CML patients undergoing autologous bone marrow transplantation procedures.     

Determination and interpretation of fractal properties of the sandstone pore system

A knowledge of fractal properties of the pore system is extremely useful with regard to the interrelationships between moisture transport and pore structure. The fractal dimension characterises the egree of resolutiondependence of a property. Given a completely interlaced pore system such as that of sandstone, the fractal dimension of the pore volume, or the porosity, quantifies the cross-sectional variability of the pore channels and is thus of great relevance with regard to transport processes. The fractal dimension of the pore surface describes the surface roughness. A newly-developed measuing technique is presented for the simultaneous determination of fractal dimensions of porosity and pore surface and for establishing fraction radii distributions in order to derive relevant parameters for moisture transport.     

Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.     

PET／PC共混物的辐射效应研究

研究了经溶液共混制备的聚对苯二甲酸乙二醇酯／聚碳酸酯（ＰＥＴ／ＰＣ）共混物的辐射效应。结果表明：ＰＥＴ／ＰＣ共混物在辐照过程中未发生酯交换反应和交联反应，但有降解反应发生。在研究的剂量范围内，辐照对ＰＥＴ／ＰＣ共混物中ＰＥＴ和ＰＣ的晶体形态影响不明显。     

以YAG为添加剂的气压烧结氮化硅

本文以添加ＹＡＧ的反应烧结氮化硅（ＲＢＳＮ）为前驱体，采用气氛加压烧结的工艺，在０．５～９．０ＭＰａ氮气压力范围，研究了不同氮压对烧结体的密度、相组成、强度和显微结构的影响及其相互间的关系。研究表明，通过改变氮气压力能有效地调控材料的显微结构，材料的性能又受控于显微结构的变化。     

使用混合杆柱时抽油泵柱塞的超冲程

任何抽油杆柱在理论上都可能产生超冲程，只是大小不同而已。超冲程的存在，使泵柱塞的有效冲程增大，甚至会大于光杆冲程。首次提出了抽油泵柱塞相对超冲程和绝对超冲程的概念，这将有助于正确认识玻璃钢抽油杆的作用和玻璃钢抽油杆的推广使用。将抽油杆柱简化成上端受光杆的激振位移、下端带有集中质量的弹簧－质量力学模型，建立了抽油杆柱纵向振动的偏微分方程和边界条件，然后用固有函数法求解方程，得出了抽油泵柱塞超冲程的无穷级数解析计算式。     

Delay-optimal quorum consensus for distributed systems

Given a set of nodes S, a coterie is a set of pairwise intersecting subsets of S. Each element in a coterie is called a quorum. Mutual exclusion in a distributed system can be achieved if each request is required to gel consensus from a quorum of nodes. This technique of quorum consensus is also used for replicated distributed database systems, and bicoteries and wr-coteries have been defined to capture the requirements of read and write operations in user transactions. The author is interested in finding coteries, bicoteries, and wr-coteries with optimal communication delay. The protocols take into account the network topology. They design delay-optimal quorum consensus protocols for network topologies of trees, rings, and clustered networks     

Sirius叠前深度偏移在莺歌海盆地“泥拱模糊带”处理中的应用

在对Sirius叠前深度偏移软件应用开发的基础上,分析讨论了Sirius 2D叠前深度偏移速度模型建立、层析成像及演、叠前深度偏移以及深度聚焦等技术环节的基本原理,并以莺歌海盆地某测线的处理为例,具体分析了Sirius 2D叠前深度偏移处理的流程、主要参数及时效.文中还分析讨论了莺歌海盆地中央“泥拱带”叠前深度偏移处理的地质效果.实践表明,莺歌海盆地广泛发育的与“泥拱模糊带”有关的构造各有其特殊性,只有通过3D叠前深度偏移处理才能从根本上解决“泥拱模糊带”的成像问题.     

基于TMN的接入网网管系统模型

本文介绍了 TMN 网管系统的体系结构,进而讨论了接入网网管系统的体系结构和管理接口的有关问题。