回归分析法简化钻爆设计

以某工程钻爆参数为例,阐述了在地下工程掘进施工中,应用回归分析法建立钻爆参数的相关模型,并利用此模型帮助建立某断面钻爆方案.     

液位定量式灌装机的灌装精度概率模型与可靠度计算模型

描述了控制液位定量式灌装机的灌装时间与灌装精度的关系，推导出实际灌装时间的理论计算公式。针对实际存在的各种随机变量对灌装时间的影响，建立了灌装时间的概率模型，提出基于灌装时间随机误差的灌状精度以及灌装精度可靠度概念，并相应建立出灌装精度概率模型与灌装精度可靠度计算模型。     

不清根手工双面焊材料及工艺研究

本文分析了中厚板传统手工双面焊存在的诸如打底焊焊缝质量无法保证，需用碳弧气刨清根；工人劳动强度大；生产效率低；焊接质量不稳定等主要问题。为提高打底焊焊道质量，不用清根使背面得到良好的凹成形，研制了适合Ｘ形坡口的梯形体陶瓷衬垫。探讨了焊缝背面成形的主要影响因素及控制方法。     

Minimum switching control for adaptive tracking

The switching adaptive control method has been used for quite a few years to solve the adaptive stabilization and model reference adaptive control problems. However, a serious problem with the switching control method is that the number of ‘candidate’ controllers can potentially be very large, especially for multi‐input–multi‐output systems. In this paper, we consider a class of minimum‐phase multi‐input–multi‐output plants with some mild compactness assumptions. Given any polynomial reference input, we provide a switching control law which guarantees exponentially stability of the closed‐loop system with exponential tracking performance. The main contribution of the paper is that we give the minimum number of candidate controllers required for switching. In particular, the number is equal to 2 for single‐input–single‐output plants (one for each sign of the high‐frequency gain), and is equal to 2^m for m‐input–m‐output plants. That is, the number is independent of the degree and the relative degree of the plant. Copyright © 2006 John Wiley & Sons, Ltd.     

用于频率合成器的低损耗声表面波滤波器

简述了产生声表面波滤波器插入损耗的主要机理和获得低损耗的原则；介绍了根据此原则对１００～５００ＭＨｚ５种滤波器的研制过程和结果。实验表明，采用镜像阻抗连接换能器结构可达到３～４ｄＢ的低损耗，并成功地应用于频率合成器中。     

关于布尔函数的二次逼近

本文首先利用矩阵形式引入了二阶ｗａｌｓｈ谱的概念并讨论了其性质，其次引入了二次ｂｅｎｔ函数的概念，同时论述了二次ｂｅｎｔ函数的密码学意义。     

A Petri net based approach to modeling and scheduling for an FMSand a case study

In this paper, a timed-place Petri net (TPPN) model for flexible manufacturing systems (FMSs) is constructed, which contains two major submodels: the stationary transportation model; and the variable process flow model. For multiple automated guided vehicle (AGV) systems, the authors embed a simple rule and introduce a push-AGV strategy in a TPPN model to solve the collision and traffic jam problems of such vehicles. Since a firing sequence of the TPPN from the initial marking to the final marking can be seen as a schedule of the modeled FMS, by using an A^* based search algorithm, namely, the limited-expansion A algorithm, an effective schedule of the part processing can be obtained. To show the promising potential of the proposed work, a prototype FMS is used as a target system for implementation. The experiment results assert that the job-shop scheduling problem can always be satisfactorily solved     

Enhancement of oxide break-up by implantation of fluorine inpoly-Si emitter contacted p+-n shallow junctionformation

In this study, it is demonstrated that the incorporation of fluorine can enhance poly-Si/Si interfacial oxide break-up in the poly-Si emitter contacted p⁺-n shallow junction formation. The annealing temperature for breaking up the poly-Si/Si interfacial oxide has been found to be as low as 900°C. As a result, the junction depth of the BF₂-implanted device is much larger than that of the boron-implanted device     

连续挤压法介绍

连续挤压法的特点是：挤压所需的压力是借助一个回转的摩擦轮来实现的。摩擦轮的轮缘上设有一个凹槽，其断面取决于原坯的断面（线材坯料）。本文将就这种工艺的设备和有关铝材生产阶段中的一些问题作一简介。     

局部施肥对植株生长及根系形态的影响

本文论述了局部施肥对植株地上部与地下部的影响。局部施肥促进了施肥区根系的发达 ,第一侧根与第二侧根较多 ,根的吸收表面积增多 ,根鲜重增加 ,对养分的吸收能力增强 ,但整个根系与地上部的干鲜重下降。