Gelatinization and Liquefaction of Starch with a Heat Stable α-Amylase

Sweet potato and corn starches were gelatinized and liquefied to dextrose equivalent (DE) 10 in a steam-jacketed kettle or in a twin-screw extrusion cooker in a single step process with a heat stable ex-amylase. The time required to gelatinize and liquefy 20% starch slurries in a kettle at 95°C was 45 to 50 sec. Starch powder (10 kg/hr) and water (2-6 kg/hr) were fed to an extrusion cooker to adjust the moisture contents of the starch from 20 to 55% (wet basis) and gelatinized and liquefied to DE 10 at a barrel temperature of 120°C or above with 2 to 3% (w/w) a-amylase added. The optimum conditions for the operation were to feed starch with water to maintain 50% moisture and 2% heat stable a-amylase at a barrel temperature of 120°C.     

RHEOLOGICAL MODELING of POTATO FLOUR DURING EXTRUSION COOKING

A generalized model for predicting the effects of shear rate, temperature, moisture content, time-temperature history and strain history on viscosity has been evaluated for extruded potato flour doughs. an Instron Capillary Rheometer and a 50 mm Baker Perkins co-rotating twin screw extruder were used to evaluate all effects incorporated in the model, except strain history. the power law model was used to describe shear rate effects in the range 10–10000 s^?1. the generalized model fit observed data for temperatures of 25–95°C and moisture contents ranging from 22 to 50%, wet basis. Since potato flour by its manufacturing process is pregelatinized, it was unnecessary to evaluate the effects of time-temperature history. Strain history was found to have an insignificant influence on the viscosity.     

Characteristics of pork products from Swine Fed a high monounsaturated fat diet: Part 1-Whole muscle products

Twelve percent of high-oleic sunflower oil (HOSO) was incorporated into a swine diet to replace substantial amounts of saturated fatty acids (S) in pork by monounsaturated fatty acids (M). Pork loin chops (longissimus dorsi), cooked to 74°C, and eye of round roasts (semitendinosus), cooked to 77°C, from animals on the HOSO diet were 49% and 66%, respectively, higher in the M/S ratio as compared to their counterparts from animals on the control diet. Cooking had little effect on relative differences in the M/S ratio between HOSO and control samples. Cooking loss and sensory properties were not adversely affected by the changes in fatty acid composition. However, cooked chops and roasts from the HOSO group had lower thiobarbituric acid values during storage at 4°C.     

Hydrolysis of grape monoterpenyl glycosides by Candida molischiana and Candida wickerhamii β-glucosidases

The exocellular β-glucosidases of Candida molischiana and Candida wickerhamii are able to hydrolyse geranyl, neryl, citronellyl, linalyl and α-terpinyl-β-D -glucopyranosides. The nature of the aglycone residue greatly affects the rate of hydrolysis. Glucosides with a tertiary alcohol as aglycone residue are more slowly hydrolysed than those with a primary alcohol. The β-glucosidase from C molischiana is also able to hydrolse α-L-arabinofuranosides. This results in the release of monoterpenols from a glycoside extract from grape juice.     

馈源阵面排列对偏置多波束天线特性的影响

以３７单元馈源阵为例,就用于卫星移动通信系统中的偏置多波束天线进行分析探讨：在原有两种馈源阵阵面排列形式的基础上,又提出了第三种排列形式,即馈源阵的球面排列形式,并对这三种形式下偏置多波束天线的远场特征进行了计算比较,得出了一些有益的结论;另外,将馈源阵阵面适当地偏离焦点也可使多波束天线的远场特性得以改善。     

The effects of underfill on the reliability of flip chip solder joints

Thermal fatigue damage of flip chip solder joints is a serious reliability concern, although it usually remains tolerable with the flip chip connections (of smaller chips) to ceramic boards as practiced by IBM for over a quarter century. However, the recent trend in microelectronics packaging towards bonding large chips or ceramic modules to organic boards means a larger differential thermal expansion mismatch between the board and the chip or ceramic module. To reduce the thermal stresses and strains at solder joints, a polymer underfill is customarily added to fill the cavity between the chip or module and the organic board. This procedure has typically at least resulted in an increase of the thermal fatigue life by a factor of 10, as compared to the non-underfilled case. In this contribution, we first discuss the effects of the underfill to reduce solder joint stresses and strains, as well as underfill effects on fatigue crack propagation based on a finite element analysis. Secondly, we probe the question of the importance of the effects of underfill defects, particularly that of its delamination from the chip side, on the effectiveness of the underfill to increase thermal fatigue life. Finally, we review recent experimental evidence from thermal cycling of actual flip chip modules which appears to support the predictions of our model.     

Enhancement of deep epileptiform activity in the EEG via 3-Dadaptive spatial filtering

The detection of epileptiform discharges (ED's) in the electroencephalogram (EEG) is an important component in the diagnosis of epilepsy. However, when the epileptogenic source is located deep in the brain, the ED's at the scalp are often masked by more superficial, higher-amplitude EEG activity. A noninvasive technique which uses an adaptive "beamformer" spatial filter has been investigated for the enhancement of signals from deep sources in the brain suspected of containing ED's. A forward three-layer spherical model was used to relate a dipolar source to recorded signals to determine the beamformer's spatial response constraints. The beamformer adapts, using the least-mean-squares (LMS) algorithm, to reduce signals from sources distant to some arbitrarily defined location in the brain. The beamformer produces three outputs, being the orthogonal components of the signal estimated to have arisen at or near the assumed location. Simulations were performed by using the same forward model to superimpose realistic ED's on normal EEG recordings. The simulations show the beamformer's ability to enhance signals emanating from deep foci by way of an enhancement ratio (ER), being the improvement in signal-to-noise ratio (SNR) to that observed at any of the scalp electrodes. The performance of the beamformer has been evaluated for 1) the number of scalp electrodes, 2) the recording montage, 3) dependence on the background EEG, 4) dependence on magnitude, depth, and orientation of epileptogenic focus, and 5) sensitivity to inaccuracies in the estimated location of the focus. Results from the simulations show the beamformer's performance to be dependent on the number of electrodes and moderately sensitive to variations in the EEG background. Conversely, its performance appears to be largely independent of the amplitude and morphology of the ED. The dependence studies indicated that the beamformer's performance was moderately dependent on eccentricity with the ER increasing as the dipolar source and the beamformer were moved from the center to the surface of the brain (1.51-2.26 for radial dipoles and 1.17-2.69 for tangential dipoles). The beamformer was also moderately dependent on variations in polar or azimuthal angle for radial and tangential dipoles. Higher ER's tended to be seen for locations between electrode sites. The beamformer was more sensitive to inaccuracies in both polar and azimuthal location than depth of the dipolar source. For polar locations, an ER > 1.0 was achieved when the beamformer was located within +/- 25 degrees of a radial dipole and +/- 35 degrees of a tangential dipole. Similarly, angular ranges of +/- 37.5 degrees and +/- 45 degrees, respectively, for inaccuracies in azimuthal locations. Preliminary results from real EEG records, comprising 12 definite or questionable epileptiform events, from four patients, demonstrated the beamformer's ability to enhance these events by a mean 100% (52%-215%) for referential data and a mean 104% (50%-145%) for bipolar data.     

Poxvirus virions: their surface ultrastructure and interaction with the surface membrane of host cells

Virions of vaccinia and orf viruses were examined by ultrahigh-resolution scanning electron microscopy using a non-coating method. Intracellular mature particles of vaccinia virus appeared to be covered with a net and ultrastructurally their surface consists of many fine ridges and globules, while the surfaces of orf virus mature particles recovered from infected cells consist of spirally running protrusions. The ridge-like structures of vaccinia virus were presumed to correspond to surface tubules shown by negative staining of this virus, while the spiral protrusions of orf virus were presumed to correspond to spiral threads having a criss-cross appearance by the same staining. Using scanning electron microscopy in which the samples were prepared by the conventional method, we observed: (i) many virions, i.e. one or two hundreds, or occasionally more reaching about one thousand particles, of the IHD strain of vaccinia virus, (ii) many or a moderate number of virions, i.e. about one hundred or fewer particles, of the 58 strain of cowpox virus and (iii) rather few virions, i.e. several tens or fewer particles, of the Iwate strain of orf virus on the free surface of each cell infected with these viruses. It must be noted that the number of virions detected considerably differed in respective cells examined. Virus budding was frequently observed at the cell surface of monolayer cells infected with vaccinia virus but it was never detected with cowpox or orf virus, indicating a difference in the mechanism of virus release between vaccinia and the other two viruses. When whole cells infected with vaccinia virus were examined by a combination of high-voltage and scanning electron microscopies, virions on the cell surface and those inside the cells were clearly differentiated. All virions on the cell surface had an envelope, and some of the envelopes had a slack and/or one or more bulges.     

Trehalose embedding technique for high-resolution electron crystallography: application to structural study on bacteriorhodopsin

Trehalose was compared with glucose in its use as an embedding medium for the preparation of two-dimensional crystals for electron crystallographic structure analysis. Purple membranes (two-dimensional crystals of bacteriorhodopsin) embedded in either sugar were studied in a 'partially hydrated' state as well as after 'drying' of the specimen. Diffraction patterns of the four conditions, all showing spots to a resolution better than 3.0 A, were analysed and merged. In the case of glucose embedded specimens, the merging R-factor obtained from the diffraction patterns of dried specimens was significantly better than the one obtained from partially hydrated specimens. In the case of trehalose embedding, the merging R-factor for partially hydrated specimens was significantly better than the dried one. The trehalose embedded, partially hydrated specimens gave the best merging R-factor in all four cases.     

Dynamic dispersion compensation in a 10-Gb/s optical system using anovel voltage tuned nonlinearly chirped fiber Bragg grating

We experimentally demonstrate dynamic dispersion compensation using a novel nonlinearly chirped fiber Bragg grating in a 10-Gb/s system. A single piezoelectric transducer continuously tunes the induced dispersion from 300 to 1000 ps/nm. The system achieves a bit-error rate=10^-9 after both 50 and 104 km of single-mode fiber by dynamically tuning the dispersion of the grating between 500 and 1000 ps/nm, respectively. The power penalty after 104 km is reduced from 3.5 to <1 dB