Recording characteristics of electroless-plated perpendicularrecording flexible disks with a perpendicular head

Perpendicular magnetic recording using a main-pole-driven perpendicular head was tested using electroless-plated flexible disks. Soft magnetic NiFeP films, also produced by electroless plating, were used as an underlayer of a perpendicular recording medium in this test. Two types of flexible double-layer media, composed of an electrodeless-plated CoNiReP film with two types of NiFeP underlayers with a coercivity of 2 and 5.5 Oe, were fabricated, and their recording characteristics were measured. A recording density value of 75 kFRPI was obtained for the medium with the softer magnetic 2-Oe underlayer, about twice as high a value as that for the medium with the 5.5-Oe underlayer     

Preparation of spherical fine ZnO particles by the spray pyrolysis method using ultrasonic atomization techniques

An ultrasonic atomizer was used in the spray pyrolysis method to prepare fine, spherical and uniform ZnO particles. Almost spherical particles were obtained successfully which had a mean particle size of 0.15 m and had a very narrow particle size distribution. By using alcohol as the solvent, it was found that the particles do not have hollow shell layers which could usually be observed in the spray pyrolysis process by using water as the solvent. The morphology of the ZnO particles was strongly affected by the concentration of the starting solution.     

Formation of monodispersed Ta2O5 powders

The Ta₂O₅ powders synthesized by the hydrolysis of tantalum pentaethoxide, Ta(OC₂H₅)₅ in alcoholic solution were monodispersed fine oxide particles, which were a uniform, spherical shape, non-agglomerate, and had a narrow size distribution. They grew to 1.2m after ageing for 1 h after hydrolysis. Powder X-ray diffraction and differential thermal analysisthermogravimetric analysis showed the particles were amorphous and hydrated. These particles lost the water at 290° C and gave well-crystalline Ta₂O at 740° C. Throughout these thermal processes, the particle morphology was kept almost the same.     

An authorization-based trust model for multiagent systems

In this paper an authorization-based trust model (ABTM) is described which is designed for managing access to services in a semi-open distributed environment. This is called a multiagent-based smart office environment. In this model, "trust" is defined as a set of authorization attributes that are granted by the owner of a service to the user of the service. Central to this model is a trust manager that redelegates authorizations from the service owner to the requesting user, based on access control policies that are specified by role labels which are assigned to a set of agents. The ABTM scheme is different from a centralized scheme, in which authorizations are granted directly by an authority. It is also different from a fully distributed system,where authorizations are granted based solely on the discretion of the owner of the services. The design philosophy is the separation of trust management and trust application to allow efficient management of access control in large-scale and dynamic environment, such as those that exist in multiagent systems.     

Pulsed laser annealing of GaAs in a high-pressure argon gas ambience

Pulsed laser annealing was carried out for n-type semiconducting GaAs in air, 1 bar nitrogen, 1 bar argon, and 100 bar argon gas ambiences. Depth profiles of the atomic ratio measured by SIMS indicate that pulse annealing in air results in As loss and penetration of oxygen into the crystal, both of which affect dopant redistribution and deteriorate electrical properties of the annealed layer. High electrical activity (100%) and electron mobilities were achieved for high-dose implants of Si⁺ (1 × 10¹⁵ cm⁻²) by pulsed laser annealing in the high-pressure ambience.     

Electrical resistivity and Seebeck coefficient of La1−x M x MnO3 (M = Ca,Sr) single crystals

The temperature dependence of the electrical resistivity and Seebeck coefficient was measured on single crystals of La_1–x Ca _x MnO₃(0 <x 0.3) and La_1–x Sr _x MnO 3 (0 <x 0.4) grown by the arc-image floating zone method. The electrical conduction for La_1–x crystals withx 0.2 was of the activation type aboveT _c and of the degenerate type belowT _c, while that for the crystal withx = 0.1 was of the activation type over the whole measured temperature range between –170 and 400°C. The conduction behaviour of La_{1– x} Sr _x MnO₃ was essentially the same as that of La_1–x Ca _x MnO₃ except that the conduction of the crystals withx = 0.3 and 0.4 was of the degenerate type aboveT _c. A distinct difference in Seebeck data was observed between the calcium and the strontium compounds.     

Effect of Fe2O3 crystallite size on its mechanochemical reaction with La2O3 to form LaFeO3

Fe₂O₃ powders with different crystallite sizes prepared by heating FeOOH at various temperatures were ground with La₂O₃ powder using a planetary ball mill to investigate the effect of crystallite size on mechanochemical synthesis of LaFeO₃. Fe₂O₃ powder with smaller crystallite size obtained by heating at lower temperature reacts more easily with La₂O₃ than that with larger size. The mechanochemical reaction proceeds with an increase in grinding time. Specific surface area of the LaFeO₃ powder synthesized has a large value of over 11 m²/g. The mechanochemical process can be also applied to synthesize other iron complex oxides with rare earth elements such as Pr, Nd and Sm.