Optimum combination of operating parameters in abrasive cut-off

For optimization of abrasive cut-off operation, wheel wear equation must be identified before the operation is optimized. The equation is obtained by using GMDH algorithm with successive determination of trends containing interactive terms. In the model equation factors of grinding fluid are taken into consideration in addition to the factors of wheel, work material, feed (table speed) and wheel speed. For the identification of the model wheel wear tests are performed under the experimental design treating the above-mentioned factors as independent variables. The grinding ratio (output in the model) can be predicted for combinations of various factors using the model. With the wheel wear equation and machining cost model, the optimum combination of wheel, fluid, feed and wheel speed can be selected for a given work material. The relationships between these variables and the costs are investigated.     

Decolorization and mineralization of Oolong tea polyphenols in colored soft drink wastewater by photo Fenton reaction

The decolorization and the mineralization of the colored soft drink wastewater including Oolong tea polyphenols by the photo Fenton reaction have been investigated. The decolorization of the colored soft drink wastewater including Oolong tea polyphenols by the photo Fenton reaction could be divided into 3 phases. Just after H2O2 was added to the solution, the color of the solution immediately increased from absorbance of 0.247 to 0.711 at the wavelength of 400 nm, which was defined as the 1st phase. Subsequently the significant decolorization by the photo Fenton reaction occurred at the 2nd phase. Finally, complete decolorization (the color attributed to the color of Fe3+) could be achieved in 180 min at the 3rd phase. The instantaneous and considerable color increase at the 1st phase could be attributed to the formation of intermediate colored compounds like quinones and soluble iron complexes produced by the Fenton reaction. About 95% mineralization of model colored soft drink wastewater with 229 mg L(-1) initial TOC concentration was achieved after 165 min.     

HD/SHD still image database system and image distribution in broadband network applications

This paper focuses on a practical design for an efficient scalable image database and retrieval system over broadband networks. It describes a concrete solution for the implementation of HD/SHD (high-definition/super-high-definition) still image retrieval services which can be used in different applications. The structure of the complete system, consisting of a directory server, an image server, and MMI (man-machine interface) devices, has been presented, detailing each element and their corresponding functions. The desired HD/SHD image is displayed on the HD-PDP (plasma display panel) with the aid of image matching. The proposed system generates image index automatically, eliminating special skills in preparing index images and crucially reducing the processing time (from 35 min to 110 s), and does not use keywords. It has been also shown that these indices can be used for quite accurate image retrieval, i.e., the system provides high precision rates (currently up to 98%) to the user, eliminating troubles encountered in the image retrieval operations due to limitation on the user’s age, culture, knowledge, and languages.The broadband IP networks currently have a number of issues from the viewpoint of practical system operations, and so the requirements and issues needed for the networks are discussed from the viewpoint of in-service performance, differentiation among different types of services, secure connections, and so on, focusing on handling of HD/SHD still images.     

Differential expression of laminin receptors in human hepatocellular carcinoma

Distortion-product otoacoustic emissions (DPOAEs) have been shown to be ideally sensitive to interruptions of the cochlear blood flow. However, a 15- to 30-second latency typically occurs between cessation of circulation and measurable DPOAE level changes. DPOAEs can also be characterized by phase measures. The aim of the present study was to determine in 10 rabbits the effects on DPOAE phase of repetitively compressing the internal auditory artery. In contrast to the delays measured by DPOAE level, phase changes were detected 1 to 5 seconds after internal auditory artery compression. These data suggest that the essentially "real time" monitoring of cochlear function with DPOAE phase can be used to ensure hearing preservation during surgery involving the porus acousticus and skull base.     

Development of a pulse control-type MEMS microrobot with a hardware neural network

This article presents the micro-electro-mechanical systems (MEMS) microrobot which demonstrates locomotion controlled by hardware neural networks (HNN). The size of the microrobot fabricated by the MEMS technology is 4 × 4 × 3.5 mm. The frame of the robot is made of silicon wafer, and it is equipped with a rotary-type actuator, a link mechanism, and six legs. The rotary-type actuator generates rotational movement by applying an electrical current to artificial muscle wires. The locomotion of the microrobot is obtained by the rotation of the rotary-type actuator. As in a living organism, the HNN realized robot control without using any software programs, A/D converters, or additional driving circuits. A central pattern generator (CPG) model was implemented as an HNN system to emulate the locomotion pattern. The MEMS microrobot emulated the locomotion method and the neural networks of an insect with the rotary-type actuator, the link mechanism, and the HNN. The microrobot performed forward and backward locomotion, and also changed direction by inputting an external trigger pulse. The locomotion speed was 0.325 mm/s and the step width was 1.3 mm.     

Replica Exchange Light Transport

We solve the light transport problem by introducing a novel unbiased Monte Carlo algorithm called replica exchange light transport, inspired by the replica exchange Monte Carlo method in the fields of computational physics and statistical information processing. The replica exchange Monte Carlo method is a sampling technique whose operation resembles simulated annealing in optimization algorithms using a set of sampling distributions. We apply it to the solution of light transport integration by extending the probability density function of an integrand of the integration to a set of distributions. That set of distributions is composed of combinations of the path densities of different path generation types: uniform distributions in the integral domain, explicit and implicit paths in light (particle/photon) tracing, indirect paths in bidirectional path tracing, explicit and implicit paths in path tracing, and implicit caustics paths seen through specular surfaces including the delta function in path tracing. The replica‐exchange light transport algorithm generates a sequence of path samples from each distribution and samples the simultaneous distribution of those distributions as a stationary distribution by using the Markov chain Monte Carlo method. Then the algorithm combines the obtained path samples from each distribution using multiple importance sampling. We compare the images generated with our algorithm to those generated with bidirectional path tracing and Metropolis light transport based on the primary sample space. Our proposing algorithm has better convergence property than bidirectional path tracing and the Metropolis light transport, and it is easy to implement by extending the Metropolis light transport.     

Multi-contact vertical ladder climbing with an HRP-2 humanoid

We describe the research and the integration methods we developed to make the HRP-2 humanoid robot climb vertical industrial-norm ladders. We use our multi-contact planner and multi-objective closed-loop control formulated as a QP (quadratic program). First, a set of contacts to climb the ladder is planned off-line (automatically or by the user). These contacts are provided as an input for a finite state machine. The latter builds supplementary tasks that account for geometric uncertainties and specific grasps procedures to be added to the QP controller. The latter provides instant desired states in terms of joint accelerations and contact forces to be tracked by the embedded low-level motor controllers. Our trials revealed that hardware changes are necessary, and parts of software must be made more robust. Yet, we confirmed that HRP-2 has the kinematic and power capabilities to climb real industrial ladders, such as those found in nuclear power plants and large scale manufacturing factories (e.g. aircraft, shipyard) and construction sites.     

An application of the 2-nitrobenzenesulfenyl method to proteomic profiling of human colorectal carcinoma: A novel approach for biomarker discovery

In the development of novel biomarkers, the proteomic approach is advantageous because using it the cancer-associated proteins can be directly identified. We previously developed a 2-nitrobenzenesulfenyl (NBS) method to improve quantitative proteome analysis. Here, we applied this method to proteomic profiling of colorectal carcinoma (CRC) to identify novel proteins with altered expression in CRC. Each pair of tumor and normal tissue specimens from 12 CRC patients was analyzed, and approximately 5000 NBS-labeled paired peaks were quantified. Peaks with altered signal intensities (>1.5-fold) and occurring frequently in the samples (>70%) were selected, and 128 proteins were identified by MS/MS analyses as differentially expressed proteins in CRC tissues. Many proteins were newly revealed to be CRC related; 30 were reported in earlier studies of CRC. Six proteins that were up-regulated in CRC (ZYX, RAN, RCN1, AHCY, LGALS1, and VIM) were further characterized and validated by Western blot and immunohistochemistry. All six were found to be CRC-localized, either in cancer cells or in stroma cells near the cancer cells. These results indicate that the proteins identified in this study are novel candidates for CRC markers, and that the NBS method is useful in proteome mining to discover novel biomarkers.     

Locomotion Control of MEMS Microrobot Using Pulse‐Type Hardware Neural Networks

This paper presents the locomotion control of a microelectromechanical system (MEMS) microrobot. The MEMS microrobot demonstrates locomotion control by pulse‐type hardware neural networks (P‐HNN). P‐HNN generate oscillatory patterns of electrical activity like those of living organisms. The basic component of P‐HNN is a pulse‐type hardware neuron model (P‐HNM). The P‐HNM has the same basic features as biological neurons, such as the threshold, the refractory period, and spatiotemporal summation characteristics, and allows the generation of continuous action potentials. P‐HNN has been constructed with MOSFETs and can be integrated by CMOS technology. Like living organisms, P‐HNN has realized robot control without using software programs or A/D converters. The size of the microrobot fabricated by MEMS technology was 4 × 4 × 3.5 mm. The frame of the robot was made of a silicon wafer, equipped with rotary actuators, link mechanisms, and six legs. The MEMS microrobot emulated the locomotion method and the neural networks of an insect by rotary actuators, link mechanisms, and the P‐HNN. We show that the P‐HNN can control the forward and backward locomotion of the fabricated MEMS microrobot, and that it is possible to switch its direction by inputting an external trigger pulse. The locomotion speed was 19.5 mm/min and the step size was 1.3 mm. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 43–50, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22473     

Mechanochemical solid-phase reaction between polyvinylidene fluoride and sodium hydroxide

Grinding a mixture of polyvinylidene fluoride (PVDF) and NaOH was conducted by a planetary ball mill at atmospheric condition to investigate mechanochemical reaction between the two substances. The grinding stimulates the reaction to form NaF and organic composites. Yield of fluorine converted from PVDF to NaF increases with an increase in grinding time and reaches 90% at 60 min or more. As for the organic phase, oxygen-bearing compounds are formed due to substitution of fluorine by OH base. The organic compounds are classified into water-soluble and insoluble ones, depending on their structures. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2249–2252, 2001