Thermoplastic elastomer by radiation grafting. I. Evaluation of processability of natural rubber grafted methyl methacrylate

Processability of thermoplastic elastomer (TPE) prepared by radiation-induced grafting of methyl methacrylate (MMA) onto radiation vulcanized natural rubber latex (RVNRL) has been evaluated using a kneader and a hot roll mill at 150°C. It was found that mixing time and revolution rate (rpm) of the kneader have significantly affected the processability. The longer mixing time and the higher revolution rate result in better processability. In such processing conditions, however, the mechanical properties were found to be inferior because the molecular chain scissions occurred during the mixing. A considerable improvement of mechanical properties was obtained when the mixing was carried out without added process oils. Blends of the grafted vulcanized natural rubber latex (RVNRL-g-PMMA) and MMA grafted on unvulcanized natural rubber latex (NRL-g-PMMA) improved processability where the better processability could be achieved at a shorter mixing time and a lower revolution rate. In addition, a comparable value of mechanical properties was obtained.     

Evaporation processes of water molecules from graphene edge: DFT and MD study

The evaporation processes of water molecules adsorbed in the edge region of graphene have been investigated by means of direct MO–MD method. A large system composed of 29 water molecules and a graphene sheet (C₉₆H₂₄) was used as a model system. The edge carbon atom of graphene was terminated by hydrogen atom. The geometry optimization showed that the water molecules interact with the hydrogen atoms in the edge region of graphene. At low temperature (300 K), the water molecules were dissociated as water clusters from the graphene. On the other hand, in addition to the dissociation of water clusters, the isolated water molecule was also found as dissociation product at high temperature (500 K). The mechanism of water evaporation was discussed on the basis of theoretical results.     

PCR-RFLP identification of prohibited animal derived DNA in animal feed

A method for confirming identification of prohibited species tissue in animal feed has been developed on the basis of PCR-RFLP analysis. In Japan, to prevent the spread of BSE through animal feed, the use of animal protein in feed has been regulated. Species-specific PCR detection of prohibited species materials in feed has been used as one of a series of laboratory tests to ensure the proper implementation of the feed regulations. However, since the result of this PCR method is determined only by amplicon length, it is sometimes necessary to confirm whether or not the positive result is due to the effect of a non-specific reaction. For this purpose, DNA sequencing is the best way to confirm the test result but it is not suitable for routine analysis because of the required time and cost. In this study, we developed an easy and rapid method to confirm the species identification (mammals, ruminants and cattle) by using 4 restriction enzymes: SmlI, MboI, BlnI and Hpy188III. This PCR-RFLP method, which ensures identification of prohibited animal species in feed, is useful for enhancing the reliability of feed inspection for BSE prevention. This method will be added to the Official Methods of Feed Analysis.     

A Simple Pneumatic Loading System Controlling Stress and Strain Rates for One-Dimensional Compression of Clay

A simple but automated pneumatic loading system that can control the stress and strain rates for one-dimensional (1D) compression of clay was developed. The rate-dependency of stress-strain behaviour due to the viscous property of clay was investigated by 1D compression tests on standard-size specimens by various loading methods: 1) Standard Consolidation Tests (SCTs), stepwise increasing the axial stress two times every one day; 2) ordinary Constant-Rate-of-Strain (CRS) tests at different strain rates; 3) special CRS tests including unloading and reloading cycles with different stress amplitudes at strain rates of which the absolute value was either kept constant throughout respective tests or changed at the start of reloading; and 4) special CRS tests including a number of sustained loading (SL) during otherwise primary loading or unloading or reloading at constant strain rate. Sufficiently low strain rates were employed to ensure essentially fully drained condition. The followings were found. Despite that the newly developed pneumatic loading system is rather simple, 1D compression tests following such various loading histories as above can be performed on four types of clay rather accurately. The stress-strain behaviour of clay is significantly rate-dependent, exhibiting significant creep strains at SL stages. The creep strain rate is significantly different whether SL starts during otherwise primary loading or unloading or reloading, controlled by the magnitude and sign of the initial strain rate at the start of SL. The whole observed trends of rate-dependent stress-strain behaviour can be qualitatively explained by the non-linear three-component elasto-viscoplastic model extended to cyclic loading conditions.     

Thin reduced graphene oxide interlayer with a conjugated block copolymer for high performance non-volatile ferroelectric polymer memory

Polymer ferroelectric-gate field effect transistors (Fe-FETs) employing ferroelectric polymer thin films as gate insulators are highly attractive as a next-generation non-volatile memory. For minimizing gate leakage current of a device which arises from electrically defective ferroelectric polymer layer in particular at low operation voltage, the materials design of interlayers between the ferroelectric insulator and gate electrode is essential. Here, we introduce a new solution-processed interlayer of conductive reduced graphene oxides (rGOs) modified with a conjugated block copolymer, poly(styrene-block-paraphenylene) (PS-b-PPP). A FeFET with a solution-processed p-type oligomeric semiconducting channel and ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) insulator exhibited characteristic source–drain current hysteresis arising from ferroelectric polarization switching of a PVDF-TrFE insulator. Our PS-b-PPP modified rGOs (PMrGOs) with conductive moieties embedded in insulating polymer matrix not only significantly reduced the gate leakage current but also efficiently lowered operation voltage of the device. In consequence, the device showed large memory gate voltage window and high ON/OFF source–drain current ratio with excellent data retention and read/write cycle endurance. Furthermore, our PMrGOs interlayers were successfully employed to FeFETs fabricated on mechanically flexible substrates with promising non-volatile memory performance under repetitive bending deformation.     

High-performance flat-panel solar thermoelectric generators with high thermal concentration

The conversion of sunlight into electricity has been dominated by photovoltaic and solar thermal power generation. Photovoltaic cells are deployed widely, mostly as flat panels, whereas solar thermal electricity generation relying on optical concentrators and mechanical heat engines is only seen in large-scale power plants. Here we demonstrate a promising flat-panel solar thermal to electric power conversion technology based on the Seebeck effect and high thermal concentration, thus enabling wider applications. The developed solar thermoelectric generators (STEGs) achieved a peak efficiency of 4.6% under AM1.5G (1 kW m(-2)) conditions. The efficiency is 7-8 times higher than the previously reported best value for a flat-panel STEG, and is enabled by the use of high-performance nanostructured thermoelectric materials and spectrally-selective solar absorbers in an innovative design that exploits high thermal concentration in an evacuated environment. Our work opens up a promising new approach which has the potential to achieve cost-effective conversion of solar energy into electricity.     

用仿生自组装法制备的新型生物复合材料及表征

通过仿生自组装法在室温下制备了纳米碳酸化羟基磷灰石/胶原（nCHAC）复合材料,并采用X射线衍射（XRD）、热分析（TGA）和透射电镜（TEM）进行了观察和分析.结果表明,该材料具有与天然骨相同的纳米尺度和胶原蛋白无机相,含有（2.8～14.7）w%的碳酸化HA成分;其显微结构是矿化的胶原纤维束,类似于天然骨的分级结构.揭示了碳酸化HA和胶原含量不同的复合材料中,具有微小差别的自组装单元.碳酸的百分含量影响矿物的晶体尺寸和胶原纤维的组装.因此,nCHAC复合材料是有前途的硬组织修复用材料,其所具有的特殊性能要归功于生物仿生制备出的nCHAC材料有与天然骨类似的成分和类似的微观结构.     

Crack growth characteristics of carbon nanotube-based polymer composites subjected to cyclic loading

This paper presents the characterization of crack growth in carbon nanotube (CNT)-based polymer composites under fatigue loading. Fatigue crack growth tests were performed on single-edge cracked plate specimens of CNT/polycarbonate composites at room temperature and liquid nitrogen temperature (77 K). An elastic–plastic finite element analysis was also conducted to determine the J-integral range. The crack growth rate data were expressed in terms of the J-integral range, and the effect of nanotube addition on the fatigue crack growth behavior was examined. In addition, possible mechanisms of the crack growth in the nanocomposites are discussed based on microscopic observations of the specimen fracture surfaces.     

Suppression by carotenoids of microtenoids of microcystin-induced morphological changes in mouse hepatocytes

Microcystin-LR is a liver tumor promoter in the okadaic acid class, a group of potent inhibitors of protein phosphatases 1 and 2A. Because of inhibition of protein phosphatases, microcystin-LR induces hyperphosphorylation of cellular proteins, including cytoskeletal proteins—cytokeratins 8 and 18—and causes morphological changes in mouse hepatocytes in primary culture. We studied the effects of carotenoids to antagonize microcystin-LR-induced morphological changes in hepatocytes. β-Carotene (100 nM to 100 μM), suppressed the morphological changes induced by 100 nM microcystin-LR in a dose-dependent manner. Other carotenoids tested exerted similar suppressive effects, although retinoids, such as all-trans retinol, all-trans retinoic acid, and 9-cis retinoic acid, were only weakly suppressive. The relative potency of the suppression correlated significantly with the number of conjugated double bonds in thetrans configuration. β-Carotene strongly suppressed the hyperphosphorylation of cellular proteins induced by microcystin-LR without significant changes in the basal phosphorylation level. Other antioxidants, such as α-tocopherol, did not protect the cells against microcystin-LR. Taken together, the antagonistic effects of carotenoids against microcystin-LR are difficult to explain by their antioxidant or provitamin A activities. Suppression of the hyperphosphorylation of cellular proteins may be a novel mechanism by which carotenoids inhibit tumor promotion.     

Synthesis of N-Doped ZnO by grinding and subsequent heating ZnO-urea mixture

Synthesis of nitrogen (N) doped zinc oxide (ZnO) has been attempted by a serial operation of co-grinding the mixture of ZnO and urea (CO(NH₂)₂), followed by calcining the ground product at 400 °C. The prepared ZnO sample has been characterized by X-ray diffraction (XRD) analysis, infrared spectroscopy (IR), Raman spectroscopy. All spectra from these techniques are completely different from those of the hand ground mixture sample, confirming the mechanochemical effect of N-doping. The prepared N-doped ZnO sample exhibits light absorbance in the visible light wavelength region, and has high photo-catalytic ability in an anti-bacterial test.