An in situ TEM study of phase formation in gold-aluminum couples

In the gold wire bonding of aluminum in microelectronic devices the presence of aluminum oxide on the metallization surface may be expected. Electron transparent couples containing an oxide layer at the interface were heated in a TEM to determine the effects of a passivation layer on intermetallic formation. Intermetallic phases were evidenced by changes in sample appearance and their structure was determined by electron diffraction. The presence of an oxide at the interface hindered second phase formation at temperatures at which they were usually expected to form. In aluminum rich couples, the formation of the AuAl₂ intermetallic was not observed to form until about 350°C with the oxide present. In a reverse configuration involving a gold rich couple, an amorphous oxide phase was observed between the Al and the advancing Au₂Al front. The movement of the reaction front appeared to be controlled by surface diffusion across this phase.     

Hydrogen gas pick-up mechanism of Al-alloy melt during Lost Foam Casting

The hydrogen gas pick-up problem that can occur during Lost Foam Casting was investigated with reduced pressure tests and real castings.The initial hydrogen concentration of the melt and the contact time between melt and polystyrene had a main effect on the hydrogen gas pick-up of Al melt. The hydrogen gas pick-up of Al alloy depended also on pouring temperature and a proper metal front temperature gave the minimum hydrogen pick-up. At a low pouring temperature, the hydrogen went into the melt mainly from entrapped liquid product of polystyrene but at high pouring temperature it was by the gas as well as the liquid product. The mold flask evacuation down to 710 torr decreased the gas porosity down by around 0.4 vol%. The permeability of coating thickness had a great effect because it affects the filling time and the easy removal of liquid polystyrene.     

Features of the procedures to obtain ultrafine zirconium dioxide by mechanochemical method

The results of investigation of mechanochemical reactions in the mixtures of hydroxides and carbonates of alkaline and alkaline earth metals with zirconium oxychloride and oxynitrate are presented. It is shown that one of the features of interaction between the components is the formation of the salts of alkaline and alkaline earth metals along with X-ray amorphous zirconium-containing compound. It is demonstrated that the mechanical activation of the mixture of yttrium carbonate and zirconium oxynitrate, followed by thermal treatment of this mechanically activated mixture, results in the formation of solid solution ZrO₂-Y₂O₃ in cubic modification.     

Generation of interfacial instabilities in charged electrified viscous liquid films

This study is concerned with the stability of a two-dimensional incompressible conducting liquid film surrounded by a passive conducting medium, when an electric field is applied in a direction parallel to the initially flat bounding fluid interfaces. Currents generate charges at the bounding interfaces which in turn affect the stress balances there. In the absence of an electric field, the viscous liquid film is stable (instability can be induced by the inclusion of van der Waals forces for ultra thin films). A complete model is presented, at arbitrary Reynolds number, which accounts for conductivity and permittivity contrasts between the fluid and surrounding medium, as well as surface tension. The linear stability of the system is considered for arbitrary Reynolds numbers and it is shown that the stable film can become unstable if, (i) σ _R ɛ _p >1, or (ii) σ _R ɛ _p <1 and (σ _R −1)(1−ɛ _p )<0, where σ _R is the ratio of outer to inner conductivity and ε _p is the ratio of inner to outer permittivity. Instability is possible only if the electric field is non-zero and the scalings near bifurcation points that can be used to construct nonlinear theories are calculated. Several asymptotic limits are also considered including zero Reynolds numbers and short or long waves. The instability criteria given above are constructed explicitly in the case of Stokes flow.     

Synthesis of LiFePO4 with fine particle by co-precipitation method

LiFePO₄ is a potential candidate for the cathode material of the lithium secondary batteries. A co-precipitation method was adopted to prepare LiFePO₄ because it is simple and cheap. Nitrogen gas was needed to prevent oxidation of Fe²⁺ in the aqueous solution. The co-precipitated precursor shows the high reactivity with the reductive gas, and the single phase of LiFePO₄ is successfully synthesized with the aid of carbon under less reductive conditions. LiFePO₄ fine powder prepared by co-precipitation method shows high rate capability, impressive specific capacity and cycle property.     

On the role of high-energy electrons in the formation of a plasma-beam discharge structure in a diode with a slit cathode

The spatial structure of visible emission from plasma of a transverse nanosecond pulsed electric discharge in a gas-filled diode with a hollow (slit) cathode has been experimentally studied. A relation is established between the regime of electron energy relaxation and the plasma-beam discharge structure formation. High values of the electron emission coefficient are observed in the experiment, which cannot be explained using the notion of electron emission from a cathode bombarded by fast heavy particles.     

High-strain-rate superplasticity of nanocrystalline aluminum alloy 1570

The structure and mechanical properties of nanocrystalline aluminum alloy 1570 obtained by means of severe plastic deformation have been studied. Being tested in a temperature range from 300 to 400°C, the alloy exhibits high-strain-rate superplasticity. At 400°C, the superplasticity is manifested in a very broad range of strain rates, extending from 5 × 10^?3 to 1 s^?1.     

Studying chaotic microwave oscillations in a TWO with depressed collector

Broadband chaotic oscillations were monitored in a depressed potential collector of a traveling-wave oscillator (TWO). This signal appears due to the oscillations of a virtual cathode, which is formed in the spent electron beam under the action of retarding fields existing in the multistage depressed collector.     

Optical properties of strain-compensated InAs/InGaAsN/GaAsN superlattices

The optical properties of heterostructures comprising InAs/InGaAsN quantum wells in strain-compensated GaAsN/InGaAsN superlattices have been studied. It is demonstrated that, using such superlattices of various design and thickness and with additional InAs monolayer spacers, it is possible to control the wavelength of room-temperature emission from InGaAsN quantum wells within 1.3–1.6 μm without deteriorating the output radiation characteristics, which opens additional prospects for the development of lasers on GaAs substrates for telecommunication applications.