话题发现与追踪技术研究

话题发现与追踪以新闻流为处理对象,采用基于事件的信息组织方式进行研究,一直是自然语言处理领域里的热点。该研究借鉴大量相关研究尤其是信息检索中的经典模型和方法,取得了很大成功。首先介绍了话题发现与追踪的主要研究内容、评价方法以及发展历史;然后对其多个研究内容提出一个统一研究框架,并对该框架中的关键技术进行了详细分析;最后指出该领域中的关键问题及难点,并对未来研究做出展望。     

LR-WPAN 802.15.4协议MAC的安全组件研究

介绍IEEE低速无线个人区域网(LR-WPAN)协议802.15.4安全体系中的安全模式、访问控制(ACL)入口及安全服务.提出工作在安全模式最高级别的AES-CCM组件输出,输入帧验证和加/解密的具体实施方法,并进行时间性能实验.工作环境资源受限情况下,可裁减和分级安全体系可满足不同应用中的安全需求.     

基于DSP智能家居控制系统设计

本文以凌阳16位微控制器SPCE061A为核心,配合各种外接监控设备,设计一套智能家居控制系统.采用高性能收发组件完成监控设备信息采集与传送.详细介绍了具有语音识别功能的新一代智能家居控制系统的硬件配置与软件流程,从而在实现系统功能的同时,将低成本、低功耗与友好人机界面有机结合起来.     

考虑天然气混氢的园区综合能源系统电制氢优化配置

电制氢和天然气混氢技术在促进可再生能源消纳、降低系统碳排放量方面具有良好的理论研究和工程应用前景。面向含高比例可再生能源的园区综合能源系统,提出一种计及天然气混氢及跨季节存储的电制氢优化配置方法。首先梳理了含氢园区综合能源系统的运行框架和能量流动关系,建立园区内部能源生产、转换与存储设备的数学模型,其次以设备的年化投资成本、园区综合能源系统的年度运行成本和碳交易成本最优为目标,提出电制氢优化配置模型。最后通过算例分析表明电制氢及天然气混氢技术的引入可提升可再生能源的消纳能力,降低系统的整体经济成本和碳排放量,并分析了电解槽投资成本、混氢体积分数上限以及经济性和低碳性成本权重系数变化对规划运行结果的影响。关键词：园区综合能源系统;电制氢;天然气混氢;碳交易;跨季节储氢;优化配置 中图分类号：TM732     

Blood cell counting based on U-Net++ and YOLOv5

Clinical information about a variety of disorders is available through blood cell counting, which is usually done by manual methods. However, manual methods are complex, time-consuming and susceptible to the subjective experience of inspectors. Although many efforts have been made to develop automated blood cell counting algorithms, the complexity of blood cell distribution and the highly overlapping nature of some red blood cells (RBCs) remain significant challenges that limit the improvement of analytical accuracy. Here, we proposed an end-to-end method for blood cell counting based on deep learning. Firstly, U-Net++ was used to segment the whole blood cell image into several regions of interest (ROI), and each ROI contains only one single cell or multiple overlapping cells. Subsequently, YOLOv5 was used to detect blood cells in each ROI. Specifically, we proposed several strategies, including fine classification of RBCs, adaptive adjustment for non-maximal suppression (NMS) threshold and blood cell morphology constraints to improve the accuracy of detection. Finally, the detection outcomes for each ROI were combined and superimposed. The results show that our method can effectively address the issue of high overlap and precisely segment and detect blood cells, with a 98.18% accuracy rate for blood cell counting.     

跨谱段SAR散射中心多维参数解耦和估计方法

微波光子雷达发射大带宽跨谱段的信号,为目标的精细电磁特性描述和准确识别提供基础的同时,也亟需与之相应的大带宽大转角情况下的电磁模型参数提取方法.相比窄带条件,跨谱段信号数据量大,所含物理量信息维度高且复杂,大转角情况下距离和方位向耦合.该文提出跨谱段SAR散射中心多维参数解耦和估计方法,首先结合极坐标格式算法(PFA)和属性散射中心模型构造2维解耦波数域散射中心模型,再结合坐标下降法(CDA)将复杂的高维耦合参数估计方法简化为循环迭代的1维参数估计方法,有效降低字典维度和估计复杂度,并引入Hooke-Jeeves算法提高估计精度.最后根据各个散射中心的参数估计结果对它们的结构和位置进行识别,对仿真数据的处理实验验证了该文方法的有效性.     

An optimized image watermarking algorithm based on SVD and IWT

The Journal of Supercomputing - With the wide spread of image information, it is an urgent problem to protect image property rights and crack down on piracy. Watermarking algorithm is an effective...     

合成介质对PEDOT催化染料敏化太阳电池光阴极性能的影响

采用聚3,4-乙烯二氧噻吩(PEDOT)/FTO为对电极,研究了合成介质对循环伏安法电聚合制备的PEDOT/FTO对电极性能的影响。通过SEM、CV、EIS、Tafel曲线,并首次采用SECM方法对所制备的对电极的电催化性能进行了表征。结果表明:在LiClO4水溶液和1-丁基-3-甲基四氟硼酸盐离子液体(IL)中制备的光阴极具有良好的电催化性能。J-V测试曲线表明,在LiClO4水溶液和IL中制备的光阴极所组装的DSSC器件的光电转化效率分别达6.4%和6.6%,接近于同等条件下以Pt对电极构建的DSSC器件的光电转化效率。     

Fabrication of Titanium Aluminides via Powder-Cored Wire Arc Additive Manufacturing: Microstructural and Mechanical Characterization

Herein, an innovative powder-cored wire arc additive manufacturing (PC-WAAM) process is proposed to fabricate γ-TiAl thin-walled intermetallic alloy. The metallography, phase composition, and mechanical properties at different thin-wall locations are characterized. The results show that the alternatively distributed layer-like microstructure composed of α₂ (Ti₃Al) and γ (TiAl) phases is obtained along the building direction. The content of α₂ phase exhibits the tendency of decreasing from the bottom to top region. This unique microstructure characteristic is closely related to the typical thermal cycling history during deposition. Moreover, the tensile strength and microhardness of the top region are lower than the middle and bottom region. In general, the current PC-WAAM technique shows promising capability of fabricating γ-TiAl intermetallic alloy with low cost. This work becomes a valuable reference for understanding the evolution mechanism of microstructure and paves the way for the flexible and customized additive manufacturing of γ-TiAl alloy.