Nodal sensitivities as error estimates in computational mechanics

Summary This paper proposes the use of special sensitivities, called nodal sensitivities, as error indicators and estimators for numerical analysis in mechanics. Nodal sensitivities are defined as rates of change of response quantities with respect to nodal positions. Direct analytical differentiation is used to obtain the sensitivities, and the infinitesimal perturbations of the nodes are forced to lie along the elements. The idea proposed here can be used in conjunction with general purpose computational methods such as the Finite Element Method (FEM), the Boundary Element Method (BEM) or the Finite Difference Method (FDM); however, the BEM is the method of choice in this paper. The performance of the error indicators is evaluated through two numerical examples in linear elasticity.     

Role of embB in natural and acquired resistance to ethambutol in mycobacteria

The mycobacterial embCAB operon encodes arabinosyl transferases, putative targets of the antimycobacterial agent ethambutol (EMB). Mutations in embB lead to resistance to EMB in Mycobacterium tuberculosis. The basis for natural, intrinsic resistance to EMB in nontuberculous mycobacteria (NTM) is not known; neither is the practical implication of resistance to EMB in the absence of embB mutations in M. tuberculosis well understood. The conserved embB resistance-determining region (ERDR) of a collection of 13 strains of NTM and 12 EMB-resistant strains of M. tuberculosis was investigated. Genotypes were correlated with drug susceptibility phenotypes. High-level natural resistance to EMB (MIC, . or =64 microg/ml) was associated with a variant amino acid motif in the ERDR of M. abscessus, M. chelonae, and M. leprae. Transfer of the M. abscessus emb allele to M. smegmatis resulted in a 500-fold increase in the MICs. In M. tuberculosis, embB mutations were associated with MICs of > or =20 microg/ml while resistance not associated with an ERDR mutation generally resulted in MICs of < or =10 microg/ml. These data further support the notion that the emb region determines intrinsic and acquired resistance to EMB and might help in the reassessment of the current recommendations for the screening and treatment of infections with EMB-resistant M. tuberculosis and NTM.     

SOPHO—S的结构分析与线路传输技术

ＳＯＰＨＯ－Ｓ系列数字程控交换机是由飞利蒲公司生产的。本文分析了该系列交换机的总体结构，并了它的线路传输技术。     

DGPSL：A DISTRIBUTED GRAPHICS LIBRARY

ＤＧＰＳＬ：ＡＤＩＳＴＲＩＢＵＴＥＤＧＲＡＰＨＩＣＳＬＩＢＲＡＲＹＳｈｉＪｉａｏｙｉｎｇ；ＰａｎＺｈｉｇｅｎｇ；ＺｈｅｎｇＷｅｎｔｉｎｇＤＧＰＳＬ：ＡＤＩＳＴＲＩＢＵＴＥＤＧＲＡＰＨＩＣＳＬＩＢＲＡＲＹ￥ＳｈｉＪｉａｏｙｉｎｇ；ＰａｎＺｈｉｇｅｎｇ；...     

程序可视化系统ProVS的设计和实现

本文研究程序代码可视化技术，即从现存的程序生成某种可视化表示，增强程序的易读性、易理解性和易维护性。首先介绍ＰｒｏＶＳ的设计思想和实现技术，然后给出输出例子。     

给水流量控制系统仿真辅助设计

本文将给水流量系统规范化，给出静、动态数学模型，通过计算机仿真计算建立起设计参数Ｓ与系统特性间关系数据库，这些数据可用于控制系统辅助设计。本文还介绍了在Ｓ较小时自动补偿系统增益和时间常数的自适应控制方法并给出仿真结果。     

Optical bistability in reflective fiber gratings

Optical bistability in a nonlinearly reflective fiber grating through the mode coupling between the LP₀₁ and counter propagation LP₀₂ modes (i,e., the reflective LP₀₁&rlhar2;LP₀₂ mode converter) is investigated by using the coupled-mode theory. Both the transmissive and the reflective properties of this nonlinear device are analyzed, which show that the output-versus-input relation exhibits the optical bistability. The switching power and the bistable hysteresis performances are also discussed. In addition, the comparison between the nonlinearly reflective mode converter (LP₀₁&rlhar2;LP₀₂) and the nonlinear fiber Bragg grating reflector (i,e., the LP₀₁ and counter-propagation LP₀₁ modes) is also presented. It is shown that the former has much lower switching power than the latter     

A Linear Cross-Coupled Control System for High-Speed Machining

We present a linear cross-coupled controller to improve highspeed contouring accuracy independently of tracking accuracy in a biaxial machine tool feed drive servomechanism. Unlike conventional cross-coupled controllers, the cross-coupled controller presented here is a linear system, so it is very easy to perform the stability and steady-state error analysis, and to optimise the controller parameters. The proposed controller is evaluated experimentally on a CNC LOM machine and compared to an uncoupled controller and a conventional cross-coupled controller. Controller performance is evaluated for a circular contour at a feedrate of 30 m min _1 . The experimental results show that the proposed controller can greatly reduce the contour error at large feedrates. The linear cross-coupled controller is simple to implement and is practical.