Thermogravimetric Determination of Carbon, Nitrogen, and Oxygen in Aluminum Nitride

A thermogravimetric method for the measurement of carbon, nitrogen, and oxygen in aluminum nitride is described. Since carbon oxidation occurs at lower temperatures than the oxidation of the aluminum compounds, thermogravimetric analyses in the respective temperature regimes can yield measurement of the oxygen, nitrogen, and carbon content. Thermogravimetric analyses were performed on mixtures of aluminum nitride and carbon with various concentrations in order to evaluate the accuracy of this method. The results were compared with those obtained by the hot gas extraction method. Errors produced by overlapping of the temperature ranges of the reactions were evaluated and experimental conditions were optimized to minimize error. This method can produce reliable results at elemental concentrations higher than a few percent. The absolute errors of the C/AI, N/Al, and O/Al atomic ratios were less then 0.02. The detection limit was evaluated to 0.2 wt% of each element. The applicability of the method to the study of the kinetics of the nitridation reaction was demonstrated.     

Rapid analysis of polymer homologues and additives with SFE/SFC-MS coupling

A rapid and easy analysis method for polymers is presented. The method involves sample preparation by SFE, separation of the extracted compounds by SFC and simultaneous quantitative detection by FID, as well as identification of unknowns by MS. The applications illustrate how structural research work and routine polymer analysis can be done with this time saving method.     

Different types of signal coupling in the visual cortex related to neural mechanisms of associative Processing and perception

The hypothesis of object representation by synchronization in the visual cortex has been supported by our recent experiments in monkeys. They demonstrated local synchrony among /spl gamma/ activities (30-90 Hz) and their perceptual modulation, according to the rules of figure-ground segregation. However, /spl gamma/-synchrony in primary visual cortex is restricted to few mm, challenging the synchronization hypothesis for larger cortical object representations. The restriction is due to randomly changing phase relations among locally synchronized patches which, however, form continuous waves of /spl gamma/-activity, traveling across object representations. The phase continuity of these waves may support coding of object continuity. Interactions across still larger distances, measured among cortical areas in human data, involve amplitude envelopes of /spl gamma/ signals. Based on models with spiking neurons we discuss potentially underlying mechanisms. Most important for /spl gamma/ synchronization are local facilitatory connections with distance-dependent delays. They also explain the occurrence of /spl gamma/ waves and the restriction of /spl gamma/-synchrony. Fast local feedback inhibition generates /spl gamma/ oscillations and supports local synchrony, while slow shunting inhibitory feedback supports figure-ground segregation. Finally, dispersion in inter-areal far projections destroys coherence of /spl gamma/ signals, but preserves their amplitude modulations. In conclusion, we propose that the hypothesis of associative processing by /spl gamma/ synchronization be extended to more general forms of signal coupling.     

Shortest path algorithms: A computational study with the C programming language

The main purpose of this study is to evaluate the computational efficiency of algorithms for calculating shortest paths when they are correctly coded by using the C programming language. The eight algorithms that we selected for this experiment are the most efficient, either measured in terms of worst-case bounds or marked as such from previous computational studies; they include the redistributive heap algorithm. We suggest computer implementations that use the full power of C. In particular, the network representation and the various data structures used to keep the scan eligible list may be managed by using only additions and no multiplications, while it is not possible with FORTRAN. These capabilities, unique to C, yield several interesting conclusions: one may expect to speed up a shortest path algorithm by a factor of 20%; in some cases, this factor may reach 30%. Interestingly, the level of programming difficulty required to achieve these benefits is not greater than that required by implementations using arrays.     

A new pneumatic bearing dynamometer for power input measurement in stirred tanks

A turntable dynamometer has been constructed for the accurate measurement of power input and mixing applications in bench stirred tank reactors. The main feature of this device is a pneumatic bearing with complementary conical parts. The conical pneumatic bearing permitted to apply eccentric loads without affecting its stability. The static friction torque in the pneumatic bearing was very small, 4 × 10^?4 Nm, and can be neglected in the experimental ranges of measured torques, i.e. from 5 × 10^?3 to 2.21 Nm. In accordance with the instrumentation used, the deviations obtained with the apparatus are less than 10% at low torque readings. At moderate torques, deviations lower than 1% are routinely obtained. Several power input measurements show that the obtained data scatter is lower than 2.5%. The power input response in the turbulent regime is in agreement with dimensional analysis: the power input depends on the cube of the impeller speed. In addition, data obtained with a turbine impeller under ungassed conditions agree with the predictions of a published correlation, which takes into account several geometrical parameters.     

New approaches for error estimation and adaptivity for 2D potential boundary element methods

This work presents two new error estimation approaches for the BEM applied to 2D potential problems. The first approach involves a local error estimator based on a gradient recovery procedure in which the error function is generated from differences between smoothed and non‐smoothed rates of change of boundary variables in the local tangential direction. The second approach involves the external problem formulation and gives both local and global measures of error, depending on a choice of the external evaluation point. These approaches are post‐processing procedures. Both estimators show consistency with mesh refinement and give similar qualitative results. The error estimator using the gradient recovery approach is more general, as this formulation does not rely on an ‘optimal’ choice of an external parameter. This work presents also the use of a local error estimator in an adaptive mesh refinement procedure. This r‐refinement approach is based on the minimization of the standard deviation of the local error estimate. A non‐linear programming procedure using a feasible‐point method is employed using Lagrange multipliers and a set of active constraints. The optimization procedure produces finer meshes close to a singularity and results that are consistent with the problem physics. Copyright © 2002 John Wiley & Sons, Ltd.     

Nisin expression production from Lactococcus lactis in milk whey medium

BACKGROUND: Nisin is a commercially available bacteriocin produced by Lactococcus lactis ATCC 11454 and used as a natural agent in the biopreservation of food. In the current investigation, milk whey, a byproduct from dairy industries was used as a fermentation substrate for the production of nisin. Lactococcus lactis ATCC 11454 was developed in a rotary shaker (30 °C/36 h/100 rpm) using two different media with milk whey (i) without filtration, pH 6.8, adjusted with NaOH 2 mol L^?1 and without pH adjustment, both autoclaved at 121 °C for 30 min, and (ii) filtrated (1.20 µm and 0.22 µm membrane filter). These cultures were transferred five times using 5 mL aliquots of broth culture for every new volume of the respective media. RESULTS: The results showed that culture media composed of milk whey without filtration supplied L. lactis its adaptation needs better than filtrated milk whey. Nisin titers, in milk whey without filtration (pH adjusted), was 11120.13 mg L^?1 in the second transfer, and up to 1628‐fold higher than the filtrated milk whey, 6.83 mg.L^?1 obtained in the first^t transfer. CONCLUSIONS: Biological processing of milk byproducts (milk whey) can be considered a profitable alternative, generating high‐value bioproducts and contributing to decreasing river disposals by dairy industries. Copyright © 2008 Society of Chemical Industry     

An expert PID controller uses refined ziegler and nichols rules and fuzzy logic ideas

This article proposes a scheme for the on-line adjustment of three mode controller settings based on experimental measurements of closed-loop performance. It uses a recently developed heuristic tuning procedure to identify estimated process parameters. This method may give rise to conflicting estimates. Fuzzy Set theory is applied to manage the situation in terms of a fuzzy conjunction to combine the various estimates. PID control was chosen because of its wide use in the industrial environment due to driving simplicity and robustness. The article shows design, development, and computer simulation aspects.     

Effet de la pression sur la transition ruisselant-pulsé dans les réacteurs catalytiques à lit fixe arrosé

The effect of pressure on transition displacement between trickle and pulsed regimes (TPR: trickle-pulsed transition) in catalytic trickle bed reactors (CTBR) is not properly predicted by existing theoretical models and empirical correlations. Based on high pressure TPR data available to date, a modified Charpentier diagram is proposed to quantify directly the effect of pressure in non-foaming systems.