Polyhydrosilane Mediated Synthesis of One-Dimensional Gold Nanostructures

This work presents a solution-phase approach for the “one pot” synthesis of polysilane-gold nanorods. The process starts by the reduction of HAuCl₄ to Au^o with a solution of poly[diphenylsilane-co-methyl(H)silane] cooled to 4 °C. The formed small Au nanoparticles (5–15 nm diameter) serve further as seeds for the heterogeneous nucleation and anisotropic growth that takes place at 25 °C and yields crystalline needle-like polymer–gold nanostructures. The evolution of the small spherical nanoparticles to nanorods with length/width aspect ratios up to 10³ has been proved by UV–Vis spectroscopy, polarized light microscopy and AFM. Further insights on the growth mechanism were obtained by SEM, DLS and TEM.     

The effect of ripening and storage conditions on the distribution of tyramine,putrescine and cadaverine in Edam-cheese

The aim of the work was to describe the development of selected biogenic amines (histamine, tyramine, putrescine and cadaverine) in 4 layers of Dutch-type cheese (Edam-cheese) depending on 3 ripening/storage regimes during a 98-day period. Biogenic amines were analysed by means of ion-exchange chromatography. A further goal was to identify microbial sources of biogenic amines in the material analysed. Phenotype characterization and repetitive sequence-based PCR fingerprinting were used to identify the isolated bacteria. The highest content of tyramine, putrescine and cadaverine was determined in cheeses stored in a ripening cellar at a temperature of 10 °C during the whole observation period. Lower biogenic amines content was determined in samples which were moved into a cold storage device (5 °C) after 38 days of storage in a ripening cellar (10 °C). The lowest concentrations of biogenic amines were detected in cheeses which were moved into a cold storage device (5 °C) after 23 days of storage in a ripening cellar (10 °C). During the 98-day period, histamine was not detected in any of the regimes. Within the cheeses analysed, non-starter lactic acid bacteria Lactobacillus curvatus, Lactobacillus casei/paracasei and Lactobacillus plantarum were detected as the main producers of the biogenic amines tested. In starter bacteria Lactococcus lactis subsp. lactis and Lactococcus lactis subsp. cremoris the decarboxylase activity tested was not detected.     

Crosslinking and grafting ethylene vinyl acetate copolymer with accelerated electrons in the presence of polyfunctional monomers

In this study, we have studied the effects of polyfunctional monomers (PFMs) on physical properties of ethylene vinyl acetate (EVA) copolymer crosslinked with electron beam (EB) or peroxides. The PFMs used were triallylcyanurate, triallylisocyanurate, trimethylolpropane trimethacrylate, zinc diacrylate, and ethylene glycol dimethacrylate. Using PFMs has led to (1) optimum cure time t ₉₀ decrease from 19′25″ to 17′30″–18′45″, (2) scorch time increase from 2′ to maximum 3′45″, (3) increasing the crosslink density of peroxide or EB-cured systems by increasing the efficiency of productive radical reactions. The most efficient PFM for EVA copolymer blends has been triallylisocyanurate. Tensile strength and tear strength of samples crosslinked with EB for all irradiation doses are significantly better than those obtained for samples crosslinked with peroxides (differences up to 190%). The results show that EB irradiation gave the best results     

Ultra dispersed particles of Fe(III) compounds in the strongly basic crosslinked ionic polymer-precursors for new sorbents and catalysts

The Mössbauer spectroscopy and SEM investigation shows that crosslinked ionic polymers containing strongly basic functional groups adsorb Fe(III)-containing cations from sulphate solution through the formation in the polymer phase of high dispersed particles of jarosite mineral type compounds. Using different procedures the particles sizes and morphology, their repartition on the surface and in the volume of the polymer granule, the composition of the “polymer-inorganic compound” structural units were modified that is important for sorbents and catalysts obtaining. On heating in water medium in a boiling water bath, a part of the jarosite type compounds in the polymer phase is converted into ultra fine β-FeOOH particles in superparamagnetic state and the rest, in relatively massive and magnetically ordered β-FeOOH particles. The higher is the content of the Fe(III) in the polymer phase, the shorter is the duration of heating in water for the appearance of relatively massive particles of β-FeOOH. The particles of the jarosite type compounds and of the β-FeOOH are formed both on the surface and in the volume of the polymer granule. Upon heating in water, a part of the Fe(III)-containing particles have migrated from the volume of the polymer granule to the surface. Thermogravimetric investigation (in an N₂ atmosphere) shows that on heating of the Fe(III)-containing polymer sample up to 900 °C, complicated processes take place.     

Interactive visual supports for children with autism

Interventions to support children with autism often include the use of visual supports, which are cognitive tools to enable learning and the production of language. Although visual supports are effective in helping to diminish many of the challenges of autism, they are difficult and time-consuming to create, distribute, and use. In this paper, we present the results of a qualitative study focused on uncovering design guidelines for interactive visual supports that would address the many challenges inherent to current tools and practices. We present three prototype systems that address these design challenges with the use of large group displays, mobile personal devices, and personal recording technologies. We also describe the interventions associated with these prototypes along with the results from two focus group discussions around the interventions. We present further design guidance for visual supports and discuss tensions inherent to their design.     

The improvement of the resistance to Candida Albicans and Trichophyton interdigitale of some cotton textile materials by treating with oxygen plasma and chitosan

This paper presents the improvement of the resistance to fungi of some cotton textile materials by treating in the manufacturing process with oxygen plasma and chitosan. Thus, after the weaving and preliminary finishing, the fabrics were cleaned in oxygen plasma atmosphere and after dyeing, have been treated with chitosan solution with concentrations of 1 or 5 g/l, in order to confer them antimicrobial properties. The antimicrobial tests were performed with two fungi: Candida albicans and Tricophyton interdigitale. The obtained antimicrobial effect was considerably higher compared to that of the raw fabrics. The colour resistance of dyed fabrics was not significantly influenced by applying the treatment-based chitosan.