Low-temperature processing of thin films based on rutile TiO2 nanoparticles for UV photocatalysis and bacteria inactivation

Using a low-temperature, simple, and economic processing technique, TiO₂ nanoparticles (rutile phase) are immobilized in an inorganic matrix and then deposited on glass for bacteria inactivation in water. Using this low thermal budget method (maximum processing temperature of 220 °C), thin films of immobilized TiO₂ nanoparticles are obtained so that practical water decontamination after UV radiation is possible by avoiding the additional step of catalyst separation from treated water. In order to validate the photocatalytic activities of these TiO₂ nanoparticles (prepared as thin films), they were tested for bacteria inactivation in water under UV–A radiation (λ > 365 nm), while extensive characterizations by dynamic light scattering, X-ray diffraction, ultra violet–visible absorption spectroscopy, fourier-transform infra red spectroscopy, and profilometry were also carried out. Despite previous reports on the low or lack of photocatalytic activity of rutile-phase TiO₂, inactivation of Escherichia coli in water was observed when thin films of this material were used when compared with the application of UV radiation alone. Physical characterization of the films suggests that size and concentration-related effects may allow the existence of photocatalytic activity for rutile-TiO₂ as long as they are exposed under UV–A radiation, whereas no effect on bacteria inactivation was observed for thin films in the absence of TiO₂ or radiation. In brief, a low thermal budget process applied to thin films based on TiO₂ nanoparticles has shown to be useful for bacteria inactivation, while possible application of these films on widely available substrates like polyethylene terephthalate materials is expected.     

An investigation on post-fire behavior of hybrid nanocomposites under bending loads

This work focuses on residual bending properties of hybrid nanocomposites after intense heat conditions. Carbon fiber/epoxy-nanoclay and carbon fiber/epoxy-graphene nanosheets were manufactured. The nanoparticles employed were Cloisite 30B nanoclay and surface modified graphene nanosheets. The epoxy system was RemLam M/HY956. For short beam samples exposed to 800 KW/m² heat flux, for a various period of time up to 120 s, the addition of nanoparticles (nanoclay and graphene nanosheets) increased the unburned thickness from 0.16 mm (original) to 2.63 mm and 2.74 mm, respectively. When the two-dimensional (plates) samples were tested, the improvement on heat performance was reduced. The unburned thickness improved close to 10% with the presence of nanoclay. The addition of graphene nanosheets leads to a decrease in unburned thickness of 12.8%. This result can be due to the good thermal protection properties of the graphene nanosheets. Using SEM analysis, it was observed that when the hybrid nanocomposites were subjected to a large heat flux, nanoparticles remained trapped inside the char layers. Finally, the proposed model seems to overestimate the residual bending response by 8%.     

Tannic acid incorporation in chitosan-based microparticles and in vitro controlled release

Chitosan, a natural polycationic polysaccharide, was coupled with two polyanionic polymers: Na-alginate and carboxymethylcellulose (CMC) and with tannic acid (TA) obtaining three species of self-assembled complexes: chitosan/alginate/TA (sample 1), chitosan/TA (sample 2) and chitosan/CMC/TA (sample 3). The microparticle formation was achieved by dropwise addition of one solution into other by using a coaxial airflow sprayer. These systems were characterized with regard to particle size distribution, thermal stability, tannic acid entrapment efficiency. Sample 2 showed quite a different behavior compared to the other two samples; the particle diameter is located in the nanometric region, the quantity of incorporated tannic acid is higher than in the other two samples and the material shows better thermal stability. The release of tannic acid from these complexes was studied in water (pH = 5.89), phosphates buffer (pH = 7.04) and acetate buffer (pH = 4.11). These studies revealed two distinct periods in tannic acid delivery process: an initial period, varying between 4 and 10 h, characterized by a high release rate with a delivered tannic acid amount of approximately 80% of the incorporated polyphenol and a second period, which starts after 20 to 30 h of delivery and it ends after approximately 120 h, when the release process takes place with low and constant rate and the kinetic curve is linear—characteristic for a zero order kinetic.     

Ratiometric coumarin-neutral red (CONER) nanoprobe for detection of hydroxyl radicals

Excessive production of reactive oxygen species can lead to alteration of cellular functions responsible for many diseases including cardiovascular diseases, neurodegenerative diseases, cancer, and aging. Hydroxyl radical is a short-lived radical which is considered very aggressive due to its high reactivity toward biological molecules. In this study, a COumarin-NEutral Red (CONER) nanoprobe was developed for detection of hydroxyl radical based on the ratiometric fluorescence signal between 7-hydroxy coumarin 3-carboxylic acid and neutral red dyes. Biocompatible poly lactide-co-glycolide (PLGA) nanoparticles containing encapsulated neutral red were produced using a coumarin 3-carboxylic acid conjugated poly(sodium N-undecylenyl-Nε-lysinate) (C3C-poly-Nε-SUK) as moiety reactive to hydroxyl radicals. The response of the CONER nanoprobe was dependent on various parameters such as reaction time and nanoparticle concentration. The probe was selective for hydroxyl radicals as compared with other reactive oxygen species including O(2)(?-), H(2)O(2), (1)O(2), and OCl(-). Furthermore, the CONER nanoprobe was used to detect hydroxyl radicals in vitro using viable breast cancer cells exposed to oxidative stress. The results suggest that this nanoprobe represents a promising approach for detection of hydroxyl radicals in biological systems.     

Effect of illite and birnessite on thallium retention and bioavailability in contaminated soils

The influence of illite and birnessite (δ-MnO(2)) amendments on the retention and bioavailability of Tl in contaminated soils was investigated. The efficiency of both phases was evaluated using Tl uptake by white mustard (Sinapis alba L.), sequential extraction and sorption experiments. The obtained data demonstrate that the application of birnessite can effectively transform Tl from the labile (easily mobilizable) fraction to its reducible form, thus lowering Tl bioavailability in soil and subsequent accumulation by plants. The Mn oxide added to the soils reduced substantially Tl uptake; Tl levels in the plants decreased by up to 50%, compared to the non-amended soil. The effect of illite on the immobilization and uptake of Tl was less pronounced, and in the carbonate-rich Leptosol has not been proved at all, suggesting the importance of bulk soil mineralogy and nature of the soil sorption complex on the behavior of this amendment. Therefore, the general applicability of illite for Tl stabilization in soils seems to be limited and strongly dependent on soil composition. In contrast, the use of birnessite like soil additive might be an efficient and environment-friendly solution for soil systems contaminated with Tl.     

An evolutionary approach to cancer chemotherapy scheduling

In this paper, we investigate the employment of evolutionary algorithms as a search mechanism in a decision support system for designing chemotherapy schedules. Chemotherapy involves using powerful anti-cancer drugs to help eliminate cancerous cells and cure the condition. It is given in cycles of treatment alternating with rest periods to allow the body to recover from toxic side-effects. The number and duration of these cycles would depend on many factors, and the oncologist would schedule a treatment for each patient’s condition. The design of a chemotherapy schedule can be formulated as an optimal control problem; using an underlying mathematical model of tumour growth (that considers interactions with the immune system and multiple applications of a cycle-phase-specific drug), the objective is to find effective drug schedules that help eradicate the tumour while maintaining the patient health’s above an acceptable level. A detailed study on the effects of different objective functions, in the quality and diversity of the solutions, was performed. A term that keeps at a minimum the tumour levels throughout the course of treatment was found to produce more regular treatments, at the expense of imposing a higher strain on the patient’s health, and reducing the diversity of the solutions. Moreover, when the number of cycles was incorporated in the problem encoding, and a parsimony pressure added to the objective function, shorter treatments were obtained than those initially found by trial and error.

Morphological organization of the dorsal protuberance of Linepithema humile (Mayr, 1868) ant's larvae (Hymenoptera, Formicidae)

The Argentine ant Linepithema humile is an important invasive species because of the levels of infestation that it can reach; however, there is little information about its presence, histological organization, and function of the dorsal protuberance, which is found exclusively in their larvae. The objective of this study was to describe it in L. humile through scanning electron microscopy and transmission electron microscopy, bringing information about this structure. The epidermis of these larvae have cuticles covering the whole body, and is formed by a sequence of overlapping lamellas where the inner ones were thicker and presented lower electron density, whereas the outer ones were thinner and highly electron dense. Pores or pore-like channels were not observed. A thick and acellular region composed of granular material was found under the cuticular layer. Out of this region, the flattened epidermic cells formed an epithelial layer. For the dorsal protuberance region, these cells become prismatic, and similarly to the cuticle, presents significant thickening. These cells presented extended microvilli, as well as a great amount of lamellar rough endoplasmic reticulum. Under this epithelium was observed a concentration of fat body cells, more numerous in the dorsal protuberance region. This study indicated that the dorsal protuberance present in the first segment of L. humile larvae has apparently no secretory function because no pores were found. This fact allowed to conclude that in L. humile larvae the dorsal protuberance would have the function to make it easier for the worker ants to carry them within the colony.     

Excluded volume effect in polyacrylonitrile solutions

Summary The paper discusses the validity criteria of the theories on the excluded volume effect for high molecular weight (Z) polyacrylonitrile. The experimental data obtained for both the interpenetration function (Z) and the hydrodynamic function II(Z) satisfactorily approach the theoretical predictions of the renormalized two-parameter theory for high excluded volume.