A statistical model for the failure of glass plates due to nickel sulfide inclusions

Nickel Sulfide (NiS) inclusions can provoke the rupture of thermally treated glass due to a phase transformation with volume increase that stresses the surrounding glass. Starting from a Pareto statistics for the population of inclusion sizes, from an assumed kinetics of the phase transformation, a micro-mechanically motivated model provides the statistical characterization of the probability of spontaneous failure of glass during lifetime. A distinction based upon the composition of NiS is used to discuss the effects of the heat soak test (HST), where glass remains at high temperature for a certain time to speed-up the phase transformation and destroy those elements with critical inclusions. Three functions à la Weibull for the probability of spontaneous rupture during lifetime are theoretically derived for the case of no HST, short HST, and long HST. In particular, the probability of collapse for long HSTs depends upon the holding time in the oven. An explanatory example shows the potentiality of the model for optimizing the HST parameters toward a target probability of failure, but experimental campaigns are needed for a proper calibration.     

Quantitative Assessment of Affinity Selection Performance by Using DNA-Encoded Chemical Libraries

DNA-encoded chemical libraries are often used for the discovery of ligands against protein targets of interest. These large collections of DNA-barcoded chemical compounds are typically screened by using affinity capture methodologies followed by PCR amplification and DNA sequencing procedures. However, the performance of individual steps in the selection procedures has been scarcely investigated, so far. Herein, the quantitative analysis of selection experiments, by using three ligands with different affinity to carbonic anhydrase IX as model compounds, is described. In the first set of experiments, quantitative PCR (qPCR) procedures are used to evaluate the recovery and selectivity for affinity capture procedures performed on different solid-phase supports, which are commonly used for library screening. In the second step, both qPCR and analysis of DNA sequencing results are used to assess the recovery and selectivity of individual carbonic anhydrase IX ligands in a library, containing 360 000 compounds. Collectively, this study reveals that selection procedures can be efficient for ligands with sub-micromolar dissociation constants to the target protein of interest, but also that selection performance dramatically drops if 10⁴ copies per library member are used as the input.     

The photoinduced charge transfer mechanism in aligned and unaligned carbon nanotubes

Using time-resolved reflectivity measurements on unaligned and aligned bundled single-wall carbon nanotubes with a pump energy of 1.55 eV, quasi-resonant with the second Van Hove singularity of semiconducting tubes, a positive sign of the transient reflectivity is detected in unaligned nanotubes. In contrast a negative sign is detected in aligned nanotubes. This discovery addresses a long-standing question showing that in unaligned nanotubes the stronger intertube interactions favor the formation of short-lived free charge carriers in semiconducting tubes. A detailed analysis of the transient reflectivity spectral response shows that the free carriers in the photo-excited state of semiconducting tubes move towards metallic tubes in about 400 fs.     

Biodiesel production from Stichococcus strains at laboratory scale

BACKGROUND: This paper reports the results of an experimental campaign of autotrophic cultures of Stichococcus strains aiming at selecting the most promising strain for biofuel production. The strain selected—S. bacillaris 158/11—was cultivated in 1 L lab‐scale bubble column photobioreactors under fed‐batch and semi‐continuous conditions. A Bold basal medium supplemented with NaNO₃ as nitrogen source was adopted. Tests were carried out at 23 °C, 140 µE m^?2 s^?1, and air flow rate ranging between 0.4 and 4 vvm. Cultures were characterized in terms of pH, concentration of total nitrogen, total organic carbon, total inorganic carbon, biomass, lipid fraction and methyl‐ester distribution of transesterified lipids. RESULTS: S. bacillaris 158/11 proved to be the best strain to produce biodiesel. Methyl‐ester distribution was characterized by a large fraction of methyl palmitate, methyl linolenate, methyl linoleate, and methyl oleate along with phytol. The process photosynthetic efficiency—fraction of available light stored as chemical energy ‐ was about 1.5%. Specific biomass productivity was ～60 mg_DM L^?1 day^?1 under the semi‐continuous conditions tested. Total lipid productivity was 14 mg L^?1 day^?1 at a dilution rate of 0.050 L day^?1. CONCLUSION: S. bacillaris 158/11 is a potential strain for massive microalgae cultures for biofuel production. Higher biomass/total‐lipid productivity could be obtained in sunlight. Copyright © 2011 Society of Chemical Industry     

Optimized production of a high-performance hybrid biomaterial: biomineralized spider silk for bone tissue engineering

Silks have been widely used as biomaterials due to their biocompatibility, biodegradability, and excellent mechanical properties. In the present work, native spider silk was used as organic template for controlled nucleation of hydroxyapatite (HA) nano-coating that can act as biomimetic interface. Different bio-inspired neutralization methods and process parameters were evaluated to optimize the silk functionalization. The morphology and chemical composition were investigated by scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis and mechanical properties were studied through tensile tests. Results showed that the optimized protocol enabled a controlled and homogeneous nucleation of apatite nano-crystals while maintaining silk mechanical performances after mineralization. This study reports the optimization of a simple and effective bio-inspired nucleation process for precise nucleation of HA onto spider silk templates, suitable to develop high-performance hybrid interfaces for bone tissue engineering. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48739.     

A Potent Mimetic of the Siglec-8 Ligand 6’-Sulfo-Sialyl Lewisx

Siglecs are members of the immunoglobulin gene family containing sialic acid binding N-terminal domains. Among them, Siglec-8 is expressed on various cell types of the immune system such as eosinophils, mast cells and weakly on basophils. Cross-linking of Siglec-8 with monoclonal antibodies triggers apoptosis in eosinophils and inhibits degranulation of mast cells, making Siglec-8 a promising target for the treatment of eosinophil- and mast cell-associated diseases such as asthma. The tetrasaccharide 6’-sulfo-sialyl Lewis^x has been identified as a specific Siglec-8 ligand in glycan array screening. Here, we describe an extended study enlightening the pharmacophores of 6’-sulfo-sialyl Lewis^x and the successful development of a high-affinity mimetic. Retaining the neuraminic acid core, the introduction of a carbocyclic mimetic of the Gal moiety and a sulfonamide substituent in the 9-position gave a 20-fold improved binding affinity. Finally, the residence time, which usually is the Achilles tendon of carbohydrate/lectin interactions, could be improved.     

Partial safety factors for laminated glass

Glass plies can be bonded together by polymeric interlayers to form laminated glass. Thanks to the capacity in finding alternative stress paths after partial breakage, it is commonly accepted that the more the layers are, the higher the safety level is. However, a negative aspect is that the tensile strength of glass carries a size effect in terms of surface area, which increases with lamination. Here we evaluate these competing factors by calibrating the partial safety factors to be used in semi-probabilistic (level-I) design, through comparison with probabilistic (level-III) methods in paradigmatic case-studies under wind, snow, and dead weight. Starting from a two-parameter Weibull distribution for glass strength, the “failure modes” approach determines the statistical distribution of strength for a multi-laminate as a function of the number of plies, which interferes with the statistics for actions. As a function of the target probability of failure for the assigned class of consequence, we introduce a new coefficient in the verification formula of level-I, to account for the effects of lamination with dependence upon the number of plies. We find that there is strong gain when passing from a monolith to a two-ply laminate, but the advantage fades by increasing the number of layers. Verification formulas of this type could avoid overconservative design.     

Aromatic volatile organic compounds absorption with phenyl-based deep eutectic solvents: A molecular thermodynamics and dynamics study

The suitability of phenyl-based deep eutectic solvents (DESs) as absorbents for toluene absorption was investigated by means of thermodynamic modeling and molecular dynamics (MD). The thermodynamic models perturbed-chain statistical associating fluid theory (PC-SAFT) and conductor-like screening model for real solvents (COSMO-RS) were used to predict the vapor–liquid equilibrium of DES–toluene systems. PC-SAFT yielded quantitative results even without using any binary fitting parameters. Among the five DESs studied in this work, [TEBAC][PhOH] consisting of triethyl benzyl ammonium chloride (TEBAC) and phenol (PhOH), was considered as the most suitable absorbent. Systems with [TEBAC][PhOH] had lowest equilibrium pressures of the considered DES–toluene mixtures, the best thermodynamic characteristics (i.e., Henry's law constant, excess enthalpy, Gibbs free energy of solvation of toluene), and the highest self-diffusion coefficient of toluene. The molecular-level mechanism was explored by MD simulations, indicating that [TEBAC][PhOH] has the strongest interaction of DES–toluene compared to the other DESs under study. This work provides guidance to rationally design novel DESs for efficient aromatic volatile organic compounds absorption.     

Surface modification of polyacrylonitrile staple fibers via alkaline hydrolysis for superabsorbent applications

The alkaline hydrolysis of polyacrylonitrile staple fibers was investigated for evaluation as superabsorbent materials. Studies were performed to analyze the hydrolysis of fibers and the quantification of the developed functional groups, such as carboxyl and amide groups as well as changes in the nitrile content by means of Micro‐ATR. Dyeing of the samples with methylene blue was carried out to monitor the carboxyl groups formed during the hydrolysis. A gradual decrease in the nitrile groups and built up of the carboxyl and the amide groups was observed during the hydrolysis. Microscopic investigation carried out to investigate the surface structure of hydrolyzed fibers. Hydrolysis led to surface nonhomogeneity and erosion that was dependent on the hydrolysis conditions. The fibers showed good water retention behavior, making them superabsorbent materials. The dyeing showed more intense coloration in the surface region of the modified fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3127–3133, 2004