Frequency and Field Dependencies of Susceptibilities of High Tc Superconductor YBCO

The temperature dependence of the first and third harmonic susceptibilities has been measured on a melt-textured YBCO for different frequencies and amplitudes of the ac magnetic field. The behavior of the experimental curves has been compared with the results obtained from the model incorporating both the concepts of Collective Creep and critical state. The predictions of the model for fundamental and third harmonic susceptibilities were consistent with the experimental data.     

Bond strength and adaptation of pulp capping materials to dentin

This study evaluated the shear bond strength (SBS) and internal marginal adaptation of pulp‐capping materials to dentin. Flat occlusal deep dentin surfaces were produced and randomly assigned to two groups (sound or artificial caries‐affected dentin). The specimens in each group were assigned to one of seven subgroups according to the materials used: Biodentine, Theracal LC, Ultra‐Blend plus, Calcimol LC, ApaCal ART, EQUIA Forte, and Ionoseal. Buildups (3‐mm inner diameter and 2‐mm deep) were made over the dentin surfaces. The bonded specimens were tested under shear forces at a crosshead speed of 0.8 mm/min and fracture modes were determined using a stereomicroscope at 25× magnification. The materials were applied to the pulp floor of prepared Class I cavities and then the cavities were restored with composite resin. Restored molar teeth were subjected to 5,000 thermocycles and sectioned in a bucco–lingual direction. Resin replicas were made to determine the adaptation at the pulp floor with scanning electron microscopy. Significant differences were determined among both bond strengths and gap formations of the materials. EQUIA Forte applied to both dentin substrates had a significantly higher SBS than the other materials. The bond strength of each material was not influenced by the dentin condition. Biodentine (3.03%), EQUIA Forte (7.83%), and Theracal LC (13.37%) had lower gap formations compared to other materials but were not significantly different from each other.     

Synthesis of novel acrylic modified water reducible alkyd resin: Investigation of acrylic copolymer ratio effect on film properties and thermal behaviors

New four‐component water reducible acrylic modified alkyd resins that are based on 1,3‐propanediol and contain different ratios of acrylic copolymer (AC) were synthesized by using a novel four‐stage fatty acid method. The final content of solids in the water reducible acrylic modified alkyd resins was 60% by weight. After the modified alkyd resin films were cured at 150°C for 1 h, it was observed that the use of AC as the modifier component had improved their physical and chemical surface coating properties and thermal behaviors. Experimental results show that the optimum AC ratio is 40% of the equivalent amount of AC to alkyd resin. Low‐volatile organic compounds (VOC) content water reducible acrylic modified alkyd resins yielded soft and flexible films with high chemical/thermal resistance, suitable for manufacturing of surface coating binders. POLYM. ENG. SCI., 56:947–954, 2016. © 2016 Society of Plastics Engineers     

Importance and applications of DOE/optimization methods in PEM fuel cells: A review

Although proton exchange membrane (PEM) fuel cells are seen as one of the energy conversion technologies of the future due to their high energy conversion efficiency, low levels of emissions, low temperature operation, and compact systems, studies continue to reduce their cost, which is the biggest obstacle to commercialization. Design of experiment (DOE) methods are frequently used in optimization of PEM fuel cells to reduce their cost by decreasing experimental runs. This paper reviews the main gains subsuming the usage of several DOE and optimization methods in PEM fuel cell components, design, operation conditions, and model parameters. It firstly focuses on the Taguchi method and response surface methodology (RSM) known to be applied usually in PEM fuel cell studies. In addition to these known methods, other experimental design and optimization methods used in PEM fuel cells are discussed, and the results are summarized.     

Evaluation of the potential use of discard species for fish silage and assessment of its oils for human consumption

Waste or by-products contains a substantial amount of nutrients. Fish silage is an alternative way for assessment of fish discards and waste generated in the fish processing industries. The aim of the study was to evaluate the potential use of discard species (Equulites klunzingeri, marine fish and Carassius gibelio, freshwater fish) for fish silage and chemical quality of fish oil extracted from fish silages prepared with acid and fermented methods. Lipid quality of fish oils extracted from fish silages with LAB strains was evaluated in terms of thiobarbituric acid (TBA), peroxide value (PV), p-Anisidine (AV), totox values and fatty acid composition. The results showed that PV, TBA, AV and totox values of all extracted fish oils were within the acceptable limits for edible oils. Recovered fish oils from silage contained high level of polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), serving as a source of good quality fish oil for human consumption.     

Numerical Study on Effects of Fuel Mixture Fraction and Li-6 Enrichment on Neutronic Parameters of a Fusion–Fission Hybrid Reactor

This study presents the effects of mixture fractions of nuclear fuels (mixture of fissile–fertile fuels and mixture of two different fertile fuels) and ⁶Li enrichment on the neutronic parameters (the tritium breeding ratio, TBR, the fission rate, FR, the energy multiplication ratio, M, the fissile breeding rate, FBR, the neutron leakage out of blanket, L, and the peak-to-average fission power density ratio, Γ) of a deuterium–tritium (D–T) fusion neutron-driven hybrid blanket. Three different fertile fuels (²³²Th, ²³⁸U and ²⁴⁴Cm), and one fissile fuel (²³⁵U) were selected as the nuclear fuel. Two different coolants (pressurized helium and natural lithium) were used for the nuclear heat transfer out of the fuel zone (FZ). The Boltzmann transport equation was solved numerically for obtaining the neutronic parameters with the help of the neutron transport code XSDRNPM/SCALE4.4a. In addition, these calculations were performed by also using the MCNP4B code. The sub-limits of the mixture fractions and ⁶Li enrichment were determined for the tritium self-sufficiency. The considered hybrid reactor can be operated in a self-sufficiency mode in the cases with the fuel mixtures mixed with a fraction of equal to or greater than these sub-limits. Furthermore, the numerical results show that the fissile fuel breeding and fission potentials of the blankets with the helium coolant are higher than with the lithium coolant.     

Poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) based tissue engineering matrices

In this study, the aim was to produce tissue-engineered bone using osteoblasts and a novel matrix material, poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV). In order to prepare a porous PHBV matrix with uniform pore size, sucrose crystals were loaded in the foam and then leached leaving pores behind. The surface of the PHBV matrix was treated with rf-oxygen plasma to increase the surface hydrophilicity. SEM examination of the PHBV matrices was carried out. Stability of PHBV foams in aqueous media was studied. The pH decrease is an indication of the degradation extent. The weight and density were unchanged for a period of 120 days but then a significant decrease was observed for the rest of the study. Osteoblast cells were then isolated from rat bone marrow and seeded onto PHBV matrices. The metabolization and proliferation on the foams was determined with MTS assay which showed that osteoblasts proliferated on PHBV. It was also found that cells proliferated better on large pore size foams (300–500 m) than on the small pore size foams (75–300 m). Production of ALP was measured spectrophotometrically. The present study demonstrated that PHBV matrices are suitable substrates for osteoblast proliferation and differentiation.     

Highly conductive polymer materials based multi-walled carbon nanotubes as counter electrodes for dye-sensitized solar cells

Poly(3,4-ethylenedioxxythiophene) (PEDOT), polyaniline (PANI) and polythiophene (PTh) based multi-walled carbon nanotube (MWCNT) composites were successfully prepared using RF-rotating plasma grafting method. Morphological characterizations of composites were determined using scanning electron microscopy (SEM), which showed that conducting polymers (CPs) of PEDOT, PANI and PTh were coated on the surface of CNTs. The surface properties of the Carbon Nanotube (CNT) composites were also determined by using Infrared Spectra (FT-IR), X-ray Photon Spectra (XPS), and Scanning Electron Microscopy-Energy Dispersive X-ray Spectra (SEM-EDX) analysis. X-ray photon spectra results confirmed the formation of the composites. Composites of MWCNT were used in dye-sensitized solar cells (DSSCs) as counter electrodes and exhibited short-circuit photocurrent densities of 11.19, 10.70 and 8.54 mA/cm² for PANI/MWCNT, PTh/MWCNT and PEDOT/CNT, respectively.     

Recent developments in cold plasma-based enzyme activity (browning,cell wall degradation,and antioxidant) in fruits and vegetables

According to the Food and Agriculture Organization of United Nations reports, approximately half of the total harvested fruits and vegetables vanish before they reach the end consumer due to their perishable nature. Enzymatic browning is one of the most common problems faced by fruit and vegetable processing. The perishability of fruits and vegetables is contributed by the various browning enzymes (polyphenol oxidase, peroxidase, and phenylalanine ammonia-lyase) and ripening or cell wall degrading enzyme (pectin methyl-esterase). In contrast, antioxidant enzymes (superoxide dismutase and catalase) assist in reversing the damage caused by reactive oxygen species or free radicals. The cold plasma technique has emerged as a novel, economic, and environmentally friendly approach that reduces the expression of ripening and browning enzymes while increasing the activity of antioxidant enzymes; microorganisms are significantly inhibited, therefore improving the shelf life of fruits and vegetables. This review narrates the mechanism and principle involved in the use of cold plasma technique as a nonthermal agent and its application in impeding the activity of browning and ripening enzymes and increasing the expression of antioxidant enzymes for improving the shelf life and quality of fresh fruits and vegetables and preventing spoilage and pathogenic germs from growing. An overview of hurdles and sustainability advantages of cold plasma technology is presented.     

Investigation of polymerization parameters affecting dopamine selectivity of a polymeric membrane

Summary By means of electrochemical oxidative polymerization, poly (1,3-phenylenediamine) films on a gold electrode were prepared at a potential of 0.8 V. The permeation properties of polymeric films at the different thickness were investigated by cyclic and differential pulse voltammetry techniques. Voltammetric studies showed that polymeric film at the 1.2 mC thickness exhibited selective permeation for dopamine while rejecting ascorbic acid. Then, all the polymerization parameters affecting the permselective characteristics were systematically investigated and the optimal values were determined. Moreover, stability of polymeric membrane was examined. The results showed that polymeric membrane, owing to permselective character, could be used as a dopamine selective membrane. Received: 10 December 1999/Revised version: 12 March 2000/Accepted: 27 March 2000