无机添加剂的浓度及pH值对纺锤形α－Fe_2O_3晶貌的影响

本文以高浓度Ｆｅ３＋盐溶液为原料，采用沸腾回流的强迫水解法研究了无机添加剂浓度及反应液初始ｐＨ值对产物纺锤形α－Ｆｅ２Ｏ３晶貌的影响。结果表明，添加剂浓度和反应液初始ｐＨ值对纺锤形α－Ｆｅ２Ｏ３的轴比具有明显的影响，并且当添加剂浓度增加到一定值时，纺锤形α－Ｆｅ２Ｏ３出现解体。     

用于生产甲基丙烯酸的杂多酸催化剂的研究

以异丁烯为原料的两段直接氧化生产甲基丙烯酸最新工艺有许多优点。其技术关键在于研制出高效的甲基丙烯醛选择性氧化催化剂。本文报道P-Mo-As-Cu杂多化合物催化剂的组成、制备条件对催化剂活性的影响。经优化后获得高选择性、高活性的二段氧化催化剂，其甲基丙烯酸收率达60％以上。     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

超细铁粉和氧化铁颗粒的研究

用透射电镜和图像分析仪等研究了超细铁粉和γ-Fe_2O_3粉末的结构、形貌、粒子的平均尺寸以及粒度分布。研究结果表明,多数超细铁粉粒子近似呈球形,并且,铁粉粒子由两相组成,粒子的核心部分是金屑a-Fe,表面的包裹层为氧化物层,它由Fe_3O_4和7-Fe_O_3的混合物组成。氧化层的平均厚度大约占整个粒子直径的20％左右。羰基铁粉粒子(含氧化层)的平均直径为16nm。直径在4～24nm范围的粒子数占总粒子数的91％,而7-Fe_2O_3粉末既有雪茄状粒子,也有小球状粒子。分析表明,球状粒子的平均直径为113nm,雪茄状粒子的平均直径(按<长 宽>/2计算)为148nm。由于超细铁粉粒子很细,且有磁性,制备电镜试样时分散比较困难。本文比较了几种分散方法后,使用了一种较好的分散方法——超声喷管分散法。     

含淀粉聚乙烯膜的时控光降解研究

使用复合光降解剂，得到了可光降解的生物降解膜。对膜的光降解进行了考察，并对影响光降解的因素进行了讨论，结果表明，我们所制得的膜是一种较好的时控光降解膜。     

膨润土凝胶调剖剂XJF的研制及应用

介绍了调剖剂XJF的配方,讨论了影响调剖剂性能的配方因素(膨润土含量、HPAM溶液浓度、XJ用量及添加剂Fc的浓度),考察了封堵能力和应用范围,简介了在火烧山油田现场试验的结果。     

Real time frequency domain fiberoptic temperature sensor

The excited state phosphorescence lifetime of alexandrite crystals is used to monitor temperature in the physiological range from 15-45°C with precision and accuracy of 0.2°C. A 500-μm cubic alexandrite crystal bounded to the distal end of an optical fiber of similar core dimensions is excited with pulsed Ne-He laser light. This apparatus uses a sampler for data acquisition and frequency domain methods for data fitting. The instrument amplifies the AC components of the detector output and band limits the signal to 12.5 kHz. The fundamental frequency of the excitation is set to 195.13 Hz to obtain 64 harmonics. This band limited signal is sampled and averaged over few hundred cycles in the time domain. The frequency domain representation of the data is obtained by employing fast Fourier transform algorithms. The phase delay and the modulation ratio of each sampled harmonic are then computed. Five to 50 values of the phase and modulations are averaged before computing the sensor lifetime. The instrument is capable of measuring precise and accurate excited state lifetimes from subpicowatt luminescent signals in plastic optical fibers. A least squares fit yields the lifetimes of single exponentials. A component of zero lifetime is introduced to account for the backscatter excitation seen by the photodetector leaking through optical interference filters. The phosphorescence lifetimes measured reproducibly to about three parts in a thousand are used to monitor physiological temperature. Temperatures are computed employing empirical polynomials. The system drift is negligible over 15 h of continuous operation. The instrumentation and methods allow 1.3-s update times and 30-s full response times     

Protein C Osaka 10 with aberrant propeptide processing: loss of anticoagulant activity due to an amino acid substitution in the protein C precursor

We studied the molecular basis of protein C deficiency in a family with a history of thromboembolic disease. An approximately 50% reduction in anticoagulant activity despite normal levels of protein C amidolytic activity and antigen was detected in plasma from the proband. All the exons and intron/exon junctions of the protein C gene were studied using a strategy that combined polymerase chain reaction amplification with DNA sequencing of the amplified fragments. We identified a C-to-A change at nucleotide number 1387 of the protein C gene in the proband and his mother, and this mutant was designated protein C Osaka 10. The C-to-A change resulted in the substitution of Ser for Arg at position -1, which is the processing protease cleavage site. The mutant protein C was partially purified from plasma of the patient's mother using barium adsorption followed by ion-exchange column chromatography. It eluted at the same sodium chloride concentration as normal protein C, and thus gamma-carboxylation of the mutant protein appeared to be normal. The apparent molecular weight of this mutant protein C was the same as that of the normal protein on immunoblotting. Amino-terminal sequence analysis showed that the light chain of the mutant protein C had an additional Ser at position-1. Thus, the loss of anticoagulant activity of protein C Osaka 10 can be explained by alteration of the conformation of the Gla domain by the additional Ser in the mutant molecule.     

铝锂合金力学性能的各向异性

针对当前困扰铝锂合金实际应用的各向异性问题，概述关于铝锂合金中各向异性的表现规律，产生机理及对于降低各向异性所采用的方法等方面的研究现状和进展，对铝锂合金各向异性表现与微观组织结构的关系以及目前克服各向异性所采用方法的局限性进行分析。就此提出，若彻底解决这一问题则必须采用更先进的合金化方法及热加工工艺，研制新一代铝锂合金的观点和研究方向。