UV Photodetectors Based on BiOCl Nanosheet Arrays: The Effects of Morphologies and Electrode Configurations

A facile chemical bath method is adopted to grow bismuth oxychloride (BiOCl) nanosheet arrays on a piece of Cu foil (denoted as BiOCl‐Cu) and isolated BiOCl nanosheets are collected by ultrasonication. A self‐supporting BiOCl film is obtained by the removal of Cu foil. Photodetectors (PDs) based on these BiOCl materials are assembled and the effects of morphologies and electrode configurations on the photoelectric performance of these PDs are examined. The BiOCl nanosheet PD achieves high responsivities in the spectral range from 250 to 350 nm, while it presents quite a small photocurrent and slow response speed. The BiOCl film PD yields low photocurrents and near‐unity on–off ratios, demonstrating poor photoelectric performance. The photocurrent of the BiOCl‐Cu PD with both electrodes on the BiOCl film is much higher than those of these above‐mentioned PDs, and the response times are fast. Meanwhile, the BiOCl‐Cu PD with separate electrodes on the BiOCl film and Cu foil achieves even higher photocurrents and presents a self‐powering characteristic, depicting the improved photodetecting performances induced by the specific morphology and distinct electrode configuration. These results would promote the applications of BiOCl nanostructures in the photoelectric devices.     

Relationship between fracture parameters from two parameter fracture model and from size effect model

This paper studies the relationship between the two parameter fracture model and the size effect model. An equivalency between two models is first established based on infinitely large size specimens. Based on this equivalency, relationships between material fracture parameters (K _Ic ^s , CTOD_c) and (G _f, c_f) are derived. Using these relationships, values of (K _Ic ^s , CTOD_c) and (G _f, c_f) can be predicted from each other. It is found that the relationship betweenCTOD _c andc _f theoretically depends on both specimen geometry and initial crack length. However this dependency is numerically insignificant, except for tensile plate with a short center notch. The obtained results may explain why both the two parameter fracture model and the size effect model can reasonably predict fracture behavior of quasi-brittle materials.     

Dynamic mix zone: location data sanitizing in assisted environments

Pervasive technology has been widely used in assistive environments and aware homes. The issue of how to preserve the privacy of patients being monitored has been attracting more public concerns. In assistive environments, location data of patients are collected through sensors for behavior patterns analysis, and they can also be shared among researchers for further research for early disease diagnosis. However, location information, even though de-identified, also introduces the risk of privacy leakage. A series of consecutive location samples can be considered as a trajectory of a single person, and this may leak private information if obtained by malicious users. This paper discusses this problem and proposes a location randomization algorithm to protect users’ location privacy. Two privacy metrics according to location privacy are defined and used to evaluate the proposed approach. A method using dynamic mix zones is proposed to confound trajectories of two or more persons.     

基于RFID技术的网络式汽车安防系统的设计

为了降低汽车的失窃率,满足人们对于智能化防盗的需求,设计出了一种融合射频识别技术和全球移动通信网络的汽车安防系统;系统以德州仪器公司的八位车用微控制器STM8AF51AA为控制核心,恩智浦公司的射频读卡芯片MF RC522能迅速识别车主的身份,实现无钥进入和无钥启动功能,热释电红外传感器和振动传感器完成现场监控功能,Simcom公司的GSM模块SIM300DZ实现短信或电话设防和解防,并通过AT命令远程控制汽车的状态;实践表明,与传统的汽车防盗系统相比,系统能唯一识别车主身份,安全性和可靠性提高,实现了智能化防盗和远程控制的统一。     

Diverse community: Demand differentiation in P2P live streaming

Peer-to-Peer (P2P) technology has become an attractive approach for enabling large-scale video streaming applications, but the factor of users’ subjective preferences is not paid enough attention in such networks. As users have various demand on video qualities, we can provide them with video streams at different resolutions without impairing their satisfaction. The adaptive streaming rate technique is a promising method. However, in providing adaptive streaming rate services, P2P live streaming design faces the following challenge: how to provide all users with uninterrupted video with their desired qualities in case that their demand dynamically changes? To shed more light on this problem, we first derive a model and formulate the problem as a resource demand vs supply problem. Then we present a framework to address the challenge via efficient bandwidth allocation and group cooperation. Through comprehensive simulations, we evaluate the effectiveness of the proposed framework, and conclude that it effectively helps existing solutions, such as Partial Participation Scheme (PPS), achieve better performance.     

Fast Algorithm for Walsh Hadamard Transform on Sliding Windows

This paper proposes a fast algorithm for Walsh Hadamard Transform on sliding windows which can be used to implement pattern matching most efficiently. The computational requirement of the proposed algorithm is about 1.5 additions per projection vector per sample, which is the lowest among existing fast algorithms for Walsh Hadamard Transform on sliding windows.     

新型锁相环在频率跟踪技术中的研究

在比较电力系统频率跟踪技术中软硬件同步优缺点的基础上,提出了一种基于FPGA的全数字锁相环(ADPLL)电路实现电力系统频率跟踪的技术;将FPGA技术运用于同步跟踪技术中,解决了软硬同步方法中的各个不足之处;全数字锁相环电路采用VHDL语言和FPGA设计,仿真波形和实验结果表明,该电路能够很好地跟踪电网频率的实时变化,相位误差仅为0.1%,频率测量误差仅为0.06%,实现了同频率同相位的锁定;速度快、精度高;对电网的谐波计算有较大的实际意义.     

BP算法在网络入侵动态取证中的设计与实现

计算机动态取证主要是用于计算机网络数据的采集和分析。为了实现入侵的动态取证,及时分析入侵企图,文中设计并实现了一个人侵动态取证系统。通过事先建立系统行为特征轮廓,利用BP神经网络技术分析系统行为,及时分析人侵企图,达到动态取证的目的。     

基于Struts框架的Web应用研究与实现

Struts是目前Java Web领域使用最广泛的框架,研究了MVC设计模式以及Struts框架中的主要组件。详细描述了将Struts框架应用到实际项目中的过程。实践表明：利用Struts框架可以提高Web开发效率以及系统的可扩展性和维护性。     

一个结合多方面定性空间信息的新方法

定性空间推理是人工智能领域中非常重要的研究内容.空间信息包含拓扑关系、大小关系、形状、距离等很多方面.以往多侧重于单一方面的研究,如何将孤立的各方面信息进行统一表示和推理是当前定性空间推理中的一个重要问题.提出利用结合操作来融合不同空间信息表示的新方法.利用结合操作,可以由原先完备互斥关系集合得到新关系,同时利用原有的复合表自动生成新关系的粗复合表.基于结合操作,给出2个理论模型:结合拓扑关系与大小关系模型、结合拓扑关系与远近关系模型.并提出了邻域划分图的概念,说明了邻域划分图与概念邻域图的关系.利用邻域划分图回答了Galton提出的问题:为什么LOS(视觉光线演算)的概念邻域图不同于标准的空间或时间关系的概念邻域图,这些关系的复合表中关系总是来自于概念邻域图.