High Diversity Gain MIMO-Antenna for UWB Application with WLAN Notch Band Characteristic Including Human Interface Devices

Wireless Personal Communications - In this paper, a UWB–MIMO antenna with the WLAN band-notch (5.1–5.85 GHz) characteristic is offered. This antenna consists of two radiated...     

Generation of square and triangular wave with independently controllable frequency and amplitude using OTAs only and its application in PWM

This paper presents a self-generating square/triangular wave generator using only the CMOS Operational Transconductance Amplifiers (OTAs) and a grounded capacitor. The output frequency and amplitude of the proposed circuit can be independently and electronically adjusted. The proposed circuit validates its advantage by consuming less amount of power, which is about 71.3 µW. The theoretical aspects are authentically showcased using the PSPICE simulation results. The performance of the proposed circuit is also verified through pre layout and post layout simulation results using the 90 nm GPDK CMOS parameters. A prototype of this circuit has been made using commercially available IC CA3080 for experimental verification. Experimentation also gives the similar output as per the theoretical proposition. The designed circuit is also made applicable to perform pulse width modulation (PWM).     

A Distance Based Reliable Cooperative Spectrum Sensing Algorithm in Cognitive Radio

Spectrum sensing is the most critical task in cognitive radio (CR) which needs to be performed very precisely in order to efficiently utilize the underutilized spectrum and to provide sufficient protection to the primary users (PUs). To improve the sensing performance under fading, shadowing and hidden terminal problems more than one CR users collaboratively perform the spectrum sensing called as cooperative spectrum sensing (CSS). In conventional CSS the decision of each CR is fused at fusion center with equal weights. But due to variable distance of each CR from the PU all decisions are not equally reliable and therefore should be assigned different weights according to their reliability. In this paper we propose a new weighting scheme for CSS under Rayleigh faded channel. In proposed weighting scheme, based on the distance of each CR from the PU reliability of CR nodes is determined and correspondingly appropriate weights are assigned to different users. The CSS algorithm using new weighting scheme gives better performance than conventional CSS algorithm.     

Formulae for determining heterodyne system spurious frequencies that coincide with desired output frequency

In this paper, formulae to determine the lowest order and other higher order spurious frequencies that coincide with desired output signal frequencies of mixers have been derived. The proposed formulae give general expressions that are suitable for any order of heterodyne mixing. The formulae have been verified using a suitable example and compared with the simulation results obtained through the radio frequency simulation software of Advanced Design System. The formulae directly reveal the order of the troublesome spurious frequencies that the designers would encounter in heterodyne systems. In comparison with these direct formulae, the results of existing spurious analysis software are based on the maximum order of simulation carried out. Based on these simulations, the coinciding spurious components have to be manually sorted out. Proposed formulae are quick tools used by the microwave system and circuit designers for choosing and finalizing heterodyne frequencies in their designs without the need for any simulations.     

A new two-dimensional C-V model for prediction of maximum frequency of oscillation (fmax) of deep submicron AlGaN/GaN HEMT for microwave and millimeter wave applications

An analytical two-dimensional capacitance-voltage model for AlGaN/GaN high electron mobility transistor (HEMTs) is developed, which is valid from a linear to saturation region. The gate source and gate drain capacitances are calculated for 120 nm gate length including the effects of fringing field capacitances. We obtain a cut-off frequency (f_T) of 120 GHz and maximum frequency of oscillations (f_max) of 160 GHz. The model is very useful for microwave circuit design and analysis. Additionally, these devices allow a high operating voltage V_DS, which is demonstrated in the present analysis. These results show an excellent agreement when compared with the experimental data.     

Accurate and Scalable Simulation of Network of Heterogeneous Sensor Devices

Simulation is an important tool to study and analyze sensor networks. Prior work in sensor network simulation focuses on homogeneous devices. In this paper, we present a system that performs scalable and accurate simulation of a network of heterogeneous sensor devices, including both Stargate intermediate level devices and mote devices. We study accuracy, performance, and scalability of our system. The results show that we can achieve accurate functional behavior for both standalone Stargate simulation and ensemble simulation of a Stargate and motes. For motes, we have less than 4.06% cycle count error for all benchmarks and for Stargate, we have less than 10% error for most benchmarks, and less than 12.5% error for all benchmarks. We also achieve less than 3.6% error for all benchmarks when simulating an ensemble of Stargate and motes. Our system is also more scalable than prior work. We can simulate 160 sensor nodes in real time speed and 2,048 sensor nodes with ten times slowdown on a 16-node cluster.

Ball Mill Synthesis of Bulk Quaternary Cu<Subscript>2</Subscript>ZnSnSe<Subscript>4</Subscript> and Thermoelectric Studies

In this work, quaternary chalcogenide Cu₂ZnSnSe₄ (CZTSe) was synthesized using a mechanochemical ball milling process and its thermoelectric properties were studied by electrical resistivity, Seebeck coefficient, and thermal conductivity measurements. The synthesis process comprises three steps viz., wet ball milling of the elemental precursors, vacuum annealing, and densification by hot pressing. The purpose of this is to evaluate the feasibility of introducing wet milling in place of vacuum melting in solid state synthesis for the reaction of starting elements. We report the structural characterization and thermoelectric studies conducted on samples that were milled at 300 rpm and 500 rpm. X-ray diffraction (XRD) analysis showed the existence of multiple phases in the as-milled samples, indicating the requirement for heat treatment. Therefore, the ball milled powders were cold pressed and vacuum annealed to eliminate the secondary phases. Annealed samples were hot pressed and made into dense pellets for further investigations. In addition to XRD, energy dispersive spectroscopy (EDS) studies were performed on hot pressed samples to study the composition. XRD and EDS studies confirm CZTSe phase formation along with ZnSe secondary phase. Electrical resistivity and Seebeck coefficient measurements were done on the hot pressed samples in the temperature range 340–670 K to understand the thermoelectric behaviour. Thermal conductivity was calculated from the specific heat capacity and thermal diffusivity values. The thermoelectric figure of merit zT values for samples milled at 300 rpm and 500 rpm are ～0.15 and ～0.16, respectively, at 630 K, which is in good agreement with the values reported for solid state synthesized compounds.     

Four-point probe characterization of 4H silicon carbide

We report on four-point probe measurements on SiC wafers as such measurements give erratic data. Current-voltage measurements on n-type SiC wafers doped to 3 × 10¹⁸ cm⁻³ are non-linear and single probe I-V measurements are symmetrical for positive and negative voltages. For comparison, similar measurements of p-type Si doped to 5 × 10¹⁴ cm⁻³ gave linear I-V, well-defined sheet resistance and the single probe I-V curves were asymmetrical indicating typical Schottky diode behavior. We believe that the reason for the non-linearity in four-point probe measurements on SiC is the high contact resistance. Calculations predict the contact resistance of SiC to be approximately 10¹² Ω which is of the order of the input resistance of the voltmeter in our four-point probe measurements. There was almost no change in two-probe I-V curves when the spacing between the probes was changed from 1 mm to 2 cm, further supporting the idea that the I-V characteristics are dominated by the contact resistance.     

Tracking-based baseline restoration circuit for acquisition of bio signals

Most bio signal waveforms have a baseline that may drift over a large range compared to the excursion of the signal component. A circuit is developed, based on the amplitude tracking technique, for fast estimation and removal of the baseline drift, for effective use of the input dynamic range of the signal acquisition setup     

A novel approach for coefficient quantization of low-pass finite impulse response filter using differential evolution algorithm

Evolutionary computational techniques have been employed judiciously in various signal processing applications of late. In this paper, such an attempt has been made to design a low-pass linear-phase multiplier-less finite duration impulse response (FIR) filter using differential evolution (DE) algorithm. This particular evolutionary optimization technique has been explored to search the impulse response coefficients of the FIR filter in the form of sum of power of two (SPT) in order to avoid the multipliers during design process. The performance of the designed low-pass filter has been studied thoroughly in terms of its frequency characteristics and primitive requirement of fundamental hardware blocks. The superiority of our design has been ascertained over a number of existing techniques by various means. Finally, the proposed filter of different lengths has been implemented on a field programmable gate array (FPGA) chip for evaluating the competency of this work. The percentage improvement in hardware complexity produced by our design has also been computed and clearly listed in this paper for convenience.