High performance 14-bit pipelined redundant signed digit ADC

A novel architecture of a pipelined redundant-signed-digit analog to digital converter(RSD-ADC) is presented featuring a high signal to noise ratio(SNR), spurious free dynamic range(SFDR) and signal to noise plus distortion(SNDR) with efficient background correction logic. The proposed ADC architecture shows high accuracy with a high speed circuit and efficient utilization of the hardware. This paper demonstrates the functionality of the digital correction logic of 14-bit pipelined ADC at each 1.5 bit/stage. This prototype of ADC architecture accounts for capacitor mismatch, comparator offset and finite Op-Amp gain error in the MDAC(residue amplification circuit) stages. With the proposed architecture of ADC, SNDR obtained is 85.89 dB, SNR is 85.9 dB and SFDR obtained is 102.8 dB at the sample rate of 100 MHz. This novel architecture of digital correction logic is transparent to the overall system, which is demonstrated by using 14-bit pipelined ADC. After a latency of 14 clocks, digital output will be available at every clock pulse. To describe the circuit behavior of the ADC, VHDL and MATLAB programs are used. The proposed architecture is also capable of reducing the digital hardware. Silicon area is also the complexity of the design.     

Bayes estimation of the linear hazard-rate model

In life testing, the failure-time distributions are often specified by choosing an appropriate hazard-rate function. The class of life-time distribution characterized by a linear hazard-rate includes the one-parameter exponential and Rayleigh distributions. Usually the parameters of the linear hazard-rate model are estimated by the method of least squares. This work is concerned with Bayes estimation of the two-parameters from a type-2 censored sample. Monte Carlo simulation is used to compare the Bayes risk of the regression estimator with the minimum Bayes risk. Discrete mixtures of decreasing failure rate distributions are known to have decreasing failure rates. The authors prove that the result holds for continuous mixtures as well     

Shrunken estimators of Weibull shape parameter from type-IIcensored samples

A shrunken estimator of the Weibull shape parameter for failure censored samples is suggested. This shrunken estimator is compared with shrunken estimators previously given. Even for sample sizes of five and ten this shrunken estimator, based on failure data censored at only three and four, respectively, can be used with advantage when one has a reasonable guess for the shape parameter. This estimator has higher efficiency and nearness than other estimators     

Freezing-induced splashing during impact of molten metal droplets with high Weber numbers

The impact of molten tin droplets (0.6 mm diameter) on solid surfaces was observed for a range of impact velocities (10–30 m/s), substrate temperatures (25–200 °C) and substrate materials (stainless steel, aluminum and glass). The substrate was mounted on the rim of a rotating flywheel and the collision of single droplets with the moving substrate was photographed. Droplet impact Reynolds number ranged from 2.2 × 10⁴ to 6.5 × 10⁴ and Weber number from 8.0 × 10² to 7.2 × 10³. On a hot surface there was no splashing and droplets spread to form disk-like splats with smooth edges. Solidification around the edges of droplets spreading on cold surfaces created a solid rim that obstructed flow and triggered splashing. An analytical model was developed to predict the transition temperature at which splashing disappeared by assuming that the thickness of the solid layer had to equal that of the splat in the time the droplet spread to its maximum extent in order to obstruct liquid flow. The model predicted the transition temperature for aluminum and stainless steel surfaces, assuming that thermal contact resistance between the droplet and substrate varied between 10⁻⁶ and 10⁻⁷ m² K/W. The model also predicted that tin droplets would not splash on glass surfaces maintained at or above room temperature, and this was confirmed by experiments.     

Solar drying vs. open sun drying: A framework for financial evaluation

Initiatives towards large-scale dissemination of solar dryers for drying of agri-produce face severe competition from the largely prevalent practice of open sun drying in most of the developing countries. Therefore, solar drying systems must offer exceptionally attractive financial gains to enhance their acceptance among the potential users. A modest attempt to develop a simple framework to facilitate a comparison of the financial feasibility of solar drying as against open sun drying has been made in the present work. Results of some exemplifying calculations are presented and briefly discussed.     

Glass Formation and Properties in the System Calcia-Gallia-Silica

The glass-formation region of the calcia-gallia-silica system was determined. The glasses within this region were measured to have a density of 3 to 4 g/cm³, a refractive index of 1.6 to 1.73, an Abbe number between 35 and 58, a thermal expansion coefficient of 6.5 × 10⁻⁷/°C to 11.5 × 10⁻⁷/°C, softening temperatures between 730° and 790°C, and a Vickers microhardness of 5.2 to 7.3 GPa. Crystalline phases were identified along the glass-formation boundary. Infrared transmission spectra were used to explain glass structures and their effect on glass properties. The results suggest that the role of calcia in the glass structure is similar to that for calcia in calcium aluminosilicate glasses.     

Synthesis of nanostructured copper hexacyanidoferrate and its application in voltammeteric detection of salbutamol

Nanostructured copper hexacyanidoferrate has been synthesized and characterized using elemental analysis, atomic absorption spectroscopy, thermal and infrared spectral studies. The transmission electron microscopic studies of the synthesized material showed that it consisted of irregular oval and rod shaped particles with a size range 70–100 nm. Nanostructured copper hexacyanidoferrate modified glassy carbon electrode was characterized by cyclic voltammetery and nanostructured copper hexacyanidoferrate–carbon nanotube composite material modified glassy carbon electrode has been used for electrocatalytic oxidation of salbutamol. The electrode modified with composite material was found to reduce the peak potential of oxidation of salbutamol by nearly 90 mV.     

Studies on the effect of thiuram disulfide on NR vulcanization accelerated by thiazole-based accelerator systems

Thiuram disulfides form synergistic combinations with thiazole and thiazole-based accelerators, namely, N-cyclohexy-2-benzothiazole sulfenamide (CBS), 2-mercaptobenzothiazole(MBT), and 2-mercaptobenzothiazyl disulfide (MBTS). Unfortunately, widely used thiuram disulfides (TD) generate carcinogenic N-nitrosoamine. It is reported that the nitrosamines from N-methylpiperazine and dibenzylamine are free from this menace. So, some investigations were carried out with the binary combinations of each of bis(N-methylpiperazino)thiuram disulfide (MPTD), tetrabenzylthiuram disulnde (TBzTD), and tetramethyl-thiuram disulfide (TMTD) separately with CBS, MBT, and MBTS. It was observed that all the TD are activated by the CBS, MBT, or MBTS in the combinations studied. The intensity of activation is manifested in the enhancement of torque, modulus, tensile strength, cure rate, hardness, and decrease of elongation at break values and is very much dependent upon the ratio of the accelerators used. Considering the torque, modulus, tensile strength, and the elongation at break values, it apears that MPTD and TBzTD are capable of competing with the hitherto unbeaten TMTD as suitable accelerators for the vulcanization of rubber. Some investigations in respect to heat- and age-resistance behavior have also been carried out and the observed differences in the activities of various binary combinations have been explained through a mechanism. The results obtained with filled vulcanizates indicate that the binary systems comprising TD and MBTS provide fruitful results of which the TBzTD–MBTS combination seems to give the best cure and physical data for practical vulcanizates. © 1996 John Wiley & Sons, Inc.     

The effect of bismaleimide resin on curing kinetics of epoxy–amine thermosets

An analysis of the cure kinetics of several formulations composed of diglycidyl ether of bisphenol-A (DGEBPA) and aromatic diamines, methylenedianiline (MDA) and diaminodiphenyl sulfone (DDS), in the absence and presence of 4,4′-bismaleimidodiphenylmethane (BM) was performed. The dynamic differential scanning calorimetry (DSC) thermograms were analyzed with the help of ASTM kinetic software to determine the kinetic parameters of the curing reactions, including the activation energy, preexponential factor, rate constant, and 60 min ½ life temperature. The effects of substitution of one curing agent for another, their concentration, and the absence and presence of BM resin and its concentration on curing behavior, ethalpy, and kinetic parameters are discussed. © 1996 John Wiley & Sons, Inc.     

Sensitivity Optimization of MEMS Based Piezoresistive Pressure Sensor for Harsh Environment

Silicon - Silicon carbide piezoresistive pressure sensor is more suitable for harsh environment due to its wide bandgap, corrosion tolerance, excellent chemical inertness, high Young’s...