网上购物系统数据库与数据仓库的比较分析

比较了数据库及数据仓库,通过网上购物系统平台的研究,分析了两者在数据信息处理中的异同,从而达到让网上购物更加完善、更加便捷地为用户服务的目的。     

一种基于特征点匹配的图像拼接方法研究

针对图像间因具有旋转及光线强度差异等现象而导致的拼接效果不佳及拼接速度慢的问题,提出一种基于特征点的配准算法;在特征点提取阶段,尺度不变的特征变换方法 (SIFT)具有对图像尺度缩放、旋转、放射变换以及亮度变化保持不变的优点,文章采用了改进的SIFT特征点提取算法;在特征点匹配阶段,采用改进的RANSAC算法对特征点匹配对提纯;最后用加权平均法实现拼接图像的融合;实验证明,该算法有效提高了图像拼接的效率和准确性,拼接精度可以达到亚像素级。     

FD—140型高灵敏测氡仪及其应用

FD—140型高灵敏测氡仪用于测量氡的浓度,测氡灵敏度可达15mBq/m~3 min。该仪器可用于普查与勘探铀矿床,也可用于找石油、煤、金、地下水和地震预报以及地质构造调查等方面。     

High-temperature sulfidation of Fe-Nb alloys

The sulfidation behavior of Fe-Nb alloys containing up to 30 w/o Nb was studied over the range of 600–900°C in 0.01 aim. S₂ vapor. All alloys were two-phase, consisting of an Fe-rich solid solution and Fe₂Nb, and followed the parabolic rate law at all temperatures. Scales consisted of two layers-an outer layer of FeS and an inner, complex layer which contained some FeS, FeNb₂S₄ (possibly some FeNb₃S₆), NbS₂, and intermetallic particles which were either completely or only partially sulfidized. Platinum markers were located always at the interface between the two layers, which corresponded to the original metal surface. Activation energies were 18±3 kcal/mol in close agreement with the 19.8 reported for pure iron. The sulfidation rate decreased markedly with increasing Nb content of the alloys. The decrease is attributed to increasing amounts of Fe₂Nb with increasing Nb, the net effect being that the diffusion path for outward iron diffusion through the inner layer is reduced as the Nb content increases. An analysis of the structure of NbS₂ reveals that it is easily intercalated with Fe between loosely bonded layers of S-Nb-S. The S-Nb-S layers are covalently bonded which results in very low diffusivities of either S or Nb in pure NbS₂. Although intercalated Fe tends to change the Van der Waal's type bonding between layers to more ionic or covalent, Fe diffuses readily between the layers in NbS₂. Intercalation of Fe also increases the concentration of sulfur defects in NbS₂, which in turn increases the diffusivity of sulfur. Nb was observed to be immobile. Thus, it is thought that either outward iron diffusion or inward sulfur diffusion in the inner layer is the rate-controlling step, in spite of the close agreement of activation energies with that of the sulfidation of pure iron.     

燃烧合成三元碳化合物Ti2AlC1-x

采用Ti，Al和C元素粉末为反应物原料，通过燃烧合成法首次成功地制备出了单相三元碳化合物Ti2AlC1-x。实验结果表明：若以“理想”晶体结构化学式Ti2AlC化学计量比为起始反应原料配比，燃烧产物主晶相为Ti2AlC2；以缺碳的非化学计量比(Ti2AlC1-x)为反应原料配比，即Ti：Al：C=3：1．5：1=2：1：0．7(摩尔比)，得到单相的燃烧产物Ti2AlC1-x。从热力学原理的角度探讨了不同原料摩尔配比对燃烧产物相组成的影响机理。     

基于Web services的WebGISVisA体系结构研究与实现*

针对目前网络地理信息系统体系结构难以实现Internet环境下的异构空间信息的互操作问题,深入分析其主要原因,在对现有网络地理信息系统的三层体系结构进行深入分析的基础上,提出一种基于Web services的网络地理信息系统体系结构(Web-based geographical information services visualization architecture,WebGISVisA).WebGISVisA体系结构通过Web services对各个地理信息系统组件进行包装,实现各个组件的跨平台操作,从技术上使得客户端和服务端达到了负载平衡,完成了WebGIS三维的虚拟现实,实现了在Internet下空间数据互操作和跨平台的功能,最大限度地达到数据共享.     

含硫氰酸盐、硫化物固体废物中总氰化合物测定方法

实验建立了含硫氰酸盐、硫化物固体废物中总氰化合物的测定方法,采用硝酸银滴定法、异烟酸-吡唑啉酮分光光度法分别测定总氰化合物含量高、低的样品。通过条件实验优化了前处理方式、称样量和干扰去除方法。该方法测定结果的相对标准偏差为0.43%～1.33%,加入标准物质回收率为91.5%～101.5%,精密度和准确度良好,符合测定要求。     

划痕法测Ni—P合金镀层结合力的研究

本文用划痕法测定了Ni-P合金镀层的结合力;观察了划痕侧面镀层的失效形式;分析了三种评定结合力的参数。结果指出,临界载荷L_C、平均应力σ_A用于评定Ni-P镀层的结合力是有条件的,而B-W公式存在的问题更多。     

An extension of Wagner's analysis of competing scale formation

Wagner's criterion to predict the minimum concentration of solute (N _B(min) ⁰ )necessary for the exclusive formation of its scale has been modified to incorporate both thermodynamic and kinetics requirements. The analysis presented here involves a receding alloy/scale interface for which the composition of the alloy at this interface is governed by thermodynamic equilibrium between the two competing scale phases and the base alloy. This is a more rigorous analysis than that of Wagner's, who assumed the alloy/scale interface to be immobile and the solute composition at the interface to be zero. A comparison is made between values of N _B(min) ⁰ found experimentally and those predicted by Wagner's and the present criterion for a number of alloy-gas systems. It is shown that the criterion developed in the present analysis can often provide a better approximation of the actual N _B(min) ⁰ .The expressions derived from the present analysis have been extended also in a semiquantitative manner to provide a criterion for the minimum amount of solute in the alloy required for the transition from internal to external scale formation.