Quantile estimation based on nomination sampling

Nomination sampling is a sampling process in which every observation is the maximum of a random sample from some distribution. If all samples are taken from a single underlying CDF, F, data can be viewed as consisting of pairs (X_i,K_i) where K_i is the size of sample i and, given K_i=k_i, X_i is distributed according to CDF F^ki. R.A. Boyles and F.J. Samaniego (1986) developed a nonparametric maximum-likelihood estimator of F. In the present work, their approach is extended to obtain estimates of the quantiles of F and to study the limit theory and consistency properties of these estimates. These results generalize the results of T.R. Willemain (1980), who discussed the estimation of the median of F based on nomination samples     

Analysis of a solar water heating system with n-tanks in series

A straightforward analysis of a solar water heating system with n-tanks connected in series has been presented. The long-term performance of the system has also been studied. On the basis of numerical calculations made for four successive days, the following conclusions have been drawn:

1. (1) The fluctuation in temperature variation decreases with increase of the number of tanks connected in series.

2. (2) The variation becomes smooth after the second successive day, which is more desirable from the point of view of users.

     

Life cycle cost analysis of HPVT air collector under different Indian climatic conditions

In this communication, a study is carried out to evaluate an annual thermal and exergy efficiency of a hybrid photovoltaic thermal (HPVT) air collector for different Indian climate conditions, of Srinagar, Mumbai, Jodhpur, New Delhi and Banglore. The study has been based on electrical, thermal and exergy output of the HPVT air collector. Further, the life cycle analysis in terms of cost/kWh has been carried out. The main focus of the study is to see the effect of interest rate, life of the HPVT air collector, subsidy, etc. on the cost/kWh HPVT air collector. A comparison is made keeping in view the energy matrices. The study reveals that (i) annual thermal and electrical efficiency decreases with increase in solar radiation and (ii) the cost/kWh is higher in case of exergy when compared with cost/kWh on the basis of thermal energy for all climate conditions. The cost/kWh for climate conditions of Jodhpur is most economical.     

Analysis of different configurations of flat plate water collectors connected in series

This paper presents the analytical study of flat plate collector based on the computer‐based thermal models considering two different cases, case A (fully covered by glass) and case B (fully covered by photovoltaic (PV) module). These models are developed based on energy balance equations. An analytical expression for characteristic equation for photovoltaic–thermal flat plate collector has been derived as a function of design and climatic parameters. This paper shows the detailed analysis of energy, exergy and electrical energy by varying the number of collectors by considering four weather conditions (A, B, C and D type) for five different cities (New Delhi, Bangalore, Mumbai, Srinagar and Jodhpur) of India. It is observed that the collectors fully covered by PV module combine the production of hot water in addition to electricity generation and it is beneficial in terms of exergy, thermal energy and electrical energy gain. Copyright © 2008 John Wiley & Sons, Ltd.     

HEAT AND MASS TRANSFER RELATIONS FOR CROP DRYING

In present communication, an attempt has been made to study the heat and mass transfer for crops namely wheat and gram. The removal of moisture from the crop was determined under simulated conditions and it was used to develop heat and mass transfer relation using linear as well as multiple regression analysis. The observations were recorded for relative humidity, temperature of crop and air and for moisture evaporated. Experimental error in terms of per cent uncertainty was calculated for recorded data which is in the range of 20 - 30 per cent for forced convection and natural cooling, respectively.     

Crosstalk reduction in mixed-signal 3-D integrated circuits with interdevice layer ground planes

We show nearly 8 dB of crosstalk reduction using ground planes between active device layers in three-dimensional (3-D) integrated circuits. Our experimental work utilizes two planes of MOS transistors with tungsten or polysilicon ground planes designed to attenuate crosstalk. Theoretical simulations, using an electromagnetic solver, and the experimental results are consistent with analytical results. The key result verified is that a ground plane, whose footprint shadows the device area, is sufficiently large for effective attenuation. The interdevice layer ground plane provides an effective means to achieve crosstalk reduction in 3-D mixed-signal/RF integration because of simple fabrication and high coupling isolation.     

Simplified loss analysis and comparison of full-bridge,full-range-ZVS DC-DC converters

The loss of zero-voltage-switching (ZVS) of active switches has been a serious limitation of full-bridge (FBZVS) converters. Many techniques have been proposed in the past to extend the range of ZVS operation over the wider and also the full range of operation. However, in these techniques ZVS is achieved at the expense of additional conduction loss in active switches and losses in the auxiliary components. In this paper, the analysis for the additional losses in various full-range FBZVS DC-DC converters and their comparative evaluation is reported. Closed form expressions are derived for average value of device currents and losses. The loss curves for various topologies are plotted and compared. The analytical results are found to be consistent with the experimental efficiency tests performed on 500 W, 100 kHz prototype. It is concluded that a recently proposed new topology has the least penalty of additional losses.     

Electron microscopic observations of Bi and Tl bearing cuprate high temperature superconductors

The second generation of high temperature superconductors typified by Bi₂Sr₂Ca _n−1Cu _n O_2n+4 and Tl₂Ba₂Ca _n−1Cu _n O_2n+4 exhibits curious structural properties which have direct relevance to the superconducting behaviour particularly transition temperature (T _c ). The present paper reports on investigations of structural properties at microlevel in Bi-bearing HTCS. We have found curious structural characteristics which manifests itself in the form of transformation froma _p ×a _p ×c to (2)^1/2 a _p ×(2)^1/2 a _p ×c through the loss of calcium atoms and the formation of five-fold modulated phase alongb through the loss of Ca and Sr atoms. We have also found the evidence of high periodicities (n=4) Bi₂Sr₂Ca₃Cu₄O₁₂. The microstructural characteristics of HTCS showing the higherT _c (R=0) ∼ 120 K exhibits unusual characteristics.     

Bioactive Carbohydrates and Peptides in Foods: An Overview of Sources,Downstream Processing Steps and Associated Bioactivities

Bioactive peptides and carbohydrates are sourced from a myriad of plant, animal and insects and have huge potential for use as food ingredients and pharmaceuticals. However, downstream processing bottlenecks hinder the potential use of these natural bioactive compounds and add cost to production processes. This review discusses the health benefits and bioactivities associated with peptides and carbohydrates of natural origin and downstream processing methodologies and novel processes which may be used to overcome these.