3-D Degradation analysis of railroad ballast

Degradation behaviour of aggregate particles of the size of railroad ballast (32–63 mm) is examined using Los Angeles (LA) milling and 3-D scanning techniques. Seven different rock types were tested at four stages of milling. For the analytical geometry and topography characterization, a new method based on Fourier and power spectra was used. The results are compared with those obtained using geometrical methods and traditional manual measurements. Diminishing of surface roughness and dimensions is evident. The change in roughness was 20–35% and for maximum dimensions of less than 10% in the case of hard rock types. The LA value was less than 15. For the weaker particles values of more than 40% and more than 20%, respectively, were obtained. The fractal dimension approached a value of 2 as a function of milling rates. Electronic Publication     

Dual-trap technique for reduction of low-frequency noise in force measuring optical tweezers

High-resolution long-time force measurements by optical tweezers are often limited by low-frequency (1/f) noise. A dual-trap technique is presented that can reduce such noise in the force signal. It incorporates a second trap (a reference trap) that probes the noise in the system and it is based upon the assumption that the low-frequency parts of the noise from the two traps are correlated. A subtraction of the low-frequency signal from the reference trap from the signal from the force measuring trap will therefore yield a net signal that is significantly less influenced by noise. It is shown that this dual-trap technique can reduce the noise in the force signal up to 60% depending on detection bandwidth.     

The effect of phosphate additives on the lubrication of rolling element bearings in a refrigerant environment

Chlorine free replacement refrigerants, HFC (hydrofluorocarbons) and HC (hydrocarbons), have shown less lubricating properties. Phosphate based additives were used to improve the lubricity with refrigerant R-134a, demonstrating positive effects. In the present paper, the ability to form lubricating film and wear of two additives, phosphate ester and acid phosphate, was investigated in a bearing test apparatus.The results show that phosphate additive in polyolester oil, in an R-134a environment, increases the lubricating film and reduce wear. Surface topography during the initial run-in changes to a more favorable profile with lower RMS angle and longer wavelengths that promote load-carrying capacity and film build-up.     

Use of local grid refinement and a Galerkin technique to study secondary migration in fractured and faulted regions

A simulator, which includes a full three dimensional, multi-component and three phase model for secondary oil migration is used to study flow through fractured and faulted regions. A control volume discretization is used to discretize the strongly coupled system of partial differential equations the model creates. Non-regular and non-matching local grid refinement (LGR) is used in critical areas to ensure the required accuracy. Two solution methods for solving the composite problem LGR create are studied. The simplest one uses the GMRES solver directly on the composite problem. The second method splits the composite problem into one coarse problem and one problem for each refined area. This method is a two level multigrid method which is based on a Galerkin technique. The CPU time and the number of iteration needed for convergence in both methods are presented and compared. Received: 23 February 1999 / Accepted: 17 June 1999     

Empirically Based Gamma-Distributed Random Wall Pressure Field in Silo

Measurements show that silo wall pressures exhibit large fluctuations in time and space during discharge of the silo. This observation is important for the design of the silo wall because spatial pressure variations may impose substantial bending moments in the silo wall that otherwise may be small or vanishing due to the carrying ability of the membrane forces in the silo wall. Information about the stochastic properties of this pressure variation cannot be obtained from any existing continuum model for the silo medium flowing within the confinement of the silo. Therefore the modeling must presently be tied to statistical analyses of the empirical evidence combined with simple mechanical principles. This paper analyzes the same data set as that analyzed by Munch-Andersen et al., but on the basis of a completely different and physically less disputable stochastic pressure field model than the one considered by them. It is shown that an explicitly constructed gamma distribution type of field in equilibrium with itself fits well to the measurements made in the Swedish Karpalund silo.     

Unexplained site variance in machine strength grading of Norway spruce structural timber

The aim of the study was to assess site effects in terms of unexplained site variance in machine strength grading of Norway spruce structural timber. The site effects were estimated for grading based on axial resonance frequency and timber length, and for grading based on dynamic modulus of elasticity. Timber was collected from 14 sites in Norway, and linear mixed models were developed based on 1188 boards. The study showed that strength grading based on axial resonance frequency and timber length leaves out effects of site that are related to altitude, latitude and site index. The variance could be reduced when the grading was based on dynamic modulus of elasticity. For both grading methods, the site effects were smaller for bending strength than for modulus of elasticity and density. Major parts of the site effects were explained by mass density, and simulations showed that it is possible to fulfil the requirements of the strength classes with a higher yield when the sorting is based on a combination of exclusion by mass density and exclusion by the frequency-based indicating property.     

Conductivity enhancement in carbon nanocone adhesive by electric field induced formation of aligned assemblies

We show how an alternating electric field can be used to assemble carbon nanocones (CNCs) and align these assemblies into microscopic wires in a commercial two-component adhesive. The wires form continuous pathways that may electrically connect the alignment electrodes, which leads to directional conductivity (～10(-3) S/m) on a macroscopic scale. This procedure leads to conductivity enhancement of at least 2-3 orders of magnitude in the case where the CNC fraction (～0.2 vol %) is 1 order of magnitude below the percolation threshold (～2 vol %). The alignment and conductivity are maintained on curing that joins the alignment electrodes permanently together. If the aligned CNC wires are damaged before curing, they can be realigned by an extended alignment period. This concept has implications in areas such as electronic packaging technology.     

Measurements of OVOCs and NMHCs in a Swiss highway tunnel for estimation of road transport emissions

Eighteen oxygenated volatile organic compounds (OVOCs) and eight nonmethane hydrocarbons (NMHCs) were measured continuously during a two-week campaign in 2004 in the Gubrist highway tunnel (Switzerland). The study aimed to estimate selected OVOC and NMHC emissions of the current vehicle fleet under highway conditions. For the measured OVOCs the highest EFs were found for ethanol (9.7 mg/km), isopropanol (3.2 mg/km), and acetaldehyde (2.5 mg/km), followed by acetone, benzaldehyde, and acrolein. Formaldehyde, the most abundant OVOC measured in other studies, was not measured by the method applied. Relative emissions of the measured OVOCs were estimated to contribute approximately 6 and 4% to the total road traffic VOC emissions from Switzerland and Europe, respectively. Results are compared with those from previous studies from the same tunnel performed in 1993 and 2002, and from campaigns in other tunnels. A continuous reduction in the emission factors (EFs) was determined for all measured compounds from 1993 until 2004. The relative contributions of light-duty vehicles (LDV) and heavy-duty vehicles (HDV) to the total emissions indicated that OVOCs were mainly produced by the HDVs, whereas LDVs dominated the production of the NMHCs.     

Lead Free Ammunition without Toxic Propellant Gases

Environmental and health considerations have encouraged the development of ammunition with substitutes for lead and other heavy metals. In general, the emission products from munitions containing nitro‐based propellants are highly complex mixtures of gases, vapors, and solid particles. The major combustion products are H₂O, CO, CO₂, H₂, and N₂. In addition, compounds including hydrogen cyanide (HCN), ammonia (NH₃), methane (CH₄), nitrogen oxides, benzene, acrylonitrile, toluene, furan, aromatic amines, benzopyrene, and various polycyclic aromatic hydrocarbons are detected in minor concentrations. Many of the identified chemical species have severe toxicological properties, and some of the compounds do even have mutagenic effects. Gun smoke emission is a concern because its exposure to humans may be substantial during military and civilian police training, as respiratory protection equipment is not routinely worn. In this work we study the compositions of some of the main decomposition products, experimentally as well as theoretically. The concept of frozen equilibrium at around 1500–2000 K appears to apply for CO, CO₂, and H₂. However, the trace species in the combustion mixtures appear theoretically to be present in negligible concentrations. Our measured results are many orders of magnitude higher than theoretical results in open space. We forecast that future development of gun powder will focus on reducing the amount of toxic trace species.     

Cognitive decline from estimated premorbid status predicts neurodegeneration in Alzheimer's disease.

This study investigated the relationship between premorbid and current cognitive function with respect to the clinical features of patients with various types of neurodegeneration in the form of Alzheimer's disease (AD), mild cognitive impairment (MCI), and subjective cognitive impairment (SCI), as compared with a healthy control group (C). Clinical features (MMSE, cognitive and depressive symptoms), genetics (apolipoprotein E; APOE) and measures of neurodegeneration (Aβ42, t-tau, and p-tau) were examined, as well as present cognitive function. Various methods of assessing premorbid cognitive function were compared, including a Swedish NART-analogous test (Irregularly Spelled Words; ISW), a Swedish lexical decision test (SLDT), a Hold test (Information in WAIS-R), Best current performance test, and combined demographic characteristics. Results showed that cognitive decline (premorbid minus current cognitive function) based on SLDT and ISW was a significant predictor for MMSE and Aβ42, whereas corresponding associations for present cognitive function and decline measures based on other methods were less powerful. Results also showed that specific verbal abilities (e.g., SLDT and ISW) were insensitive to AD and that these abilities indicated premorbid cognitive function in retrospect. In conclusion, cognitive decline from premorbid status reflects the disease processes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)