钢的连铸用保护渣的表征

在钢的连铸过程中,结晶器保护渣的性质强烈地影响着铸造的行为、钢的质量、以及连铸工艺的环境.本研究采用高温显微技术来研究保护渣的熔化行为,采用液滴测试方法来测定保护渣的熔化速率.结果表明:自由碳是控制保护渣熔化行为的主要因素.熔化速率随碳的反应能力的增加而增加,随着碳含量的减少而增加.     

高合金铁基烧结材料在轧钢导位中的应用研究

本文研究了高合金铁基烧结材料在轧钢导位中的应用。实验表明,通过粉末冶金液相烧结技术,可以获得具有优良综合性能的制品,材料密度ρ≥7.5 g/cm3,硬度≥55 HRC,抗弯强度≥1 000 MPa,冲击韧度αk≥3.9 J/cm2,满足了轧钢导位辊的工作要求。材料利用率可达95%以上、降低了制备成本。使用寿命是普通轧辊寿命的3~6倍,适用于线材和小型型材的轧钢生产。     

Cloud analysis by modeling the integration of heterogeneous satellite data and imaging

This paper presents a computer-aided cloud-analysis approach by effectively modeling the integration of heterogeneous satellite-observed data and remote sensing images. First, automatic cloud detection and tracking methods are proposed to identify the georeferenced cloud objects in satellite remote sensing images. Then, a data integration modeling mechanism is designed to collect meaningful properties of those detected clouds by integrating the heterogeneous satellite-observed data and imaging into a unified cloud database. Finally, based on the integrated global data schema, a two-phase data mining method employing the decision tree algorithm is implemented to analyze and forecast the meteorological activities of all the cloud objects. Experimental results have shown that the proposed data integration model can effectively extract and synthesize all the useful information from heterogeneous data sources to generate a unified view of knowledge, on the basis of which the evolvement trends of clouds can be analyzed properly.     

Performance evaluation of dynamically linearized and kinematically redundant planar manipulators

The objective of this research is to investigate the feasibility of a theoretical development which could lead to advanced manipulator concepts offering fast dynamic and control features. Specifically, the application of “dynamic linearization” to a kinematically redundant planar manipulator is studied. In comparing such a manipulator with a standard non-linear, non-redundant design it is shown that in addition to the expected merits in linearity, dexterity, and computational simplicity, savings in actuator energy consumption can also be realized using a relative simple trajectory optimization scheme.     

β放射性气体浓度计的新分度方法

本文介绍β放射性气体浓度计的一种新的分度方法——泄漏元件排气法。其特点是一只元件可分度放射性气体浓度计的许多读出数(甚至是几个量程),操作方便。     

Comments on `Hash-based and index-based join algorithms for cubeand ring connected multicomputers' by E.R. Omiecinski and E.T. Lin

The cost distributions of both the parallel hybrid-hash join and the parallel join-index join algorithms proposed in the above-named work (ibid., vol.1, p.329-43, Sept. 1989) are presented in more detail. The result shows that almost the entire relation may need to be retrieved from disk, though the join selectivity is low. A table of semi-join selectives and cube sizes is given to show the condition that the join-index method performs better than the hybrid-hash method, i.e., the really low selectivity for the join-index method. An error in one of the cost formulas is corrected, and a more efficient method on the final join in the join-index method is proposed     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

核电厂管系振动鉴定

本文介绍了核电厂管道振动鉴定概况,讨论了目前使用的管系振动的鉴定方法,给出了鉴定准则。