Catalytic hydrogenation of nitrile rubber using palladium and ruthenium complexes

The catalytic hydrogenation of acrylonitrile‐butadiene copolymer (nitrile rubber, NBR) using Pd(OAc)₂ or RuCl₂(PPh₃)₃ catalysts has been investigated in order to produce a totally saturated nitrile rubber. The hydrogenation of NBR is effective with both catalysts and achieved total conversion under the appropriate reaction conditions. In the case of palladium the effects of reaction parameters such as reaction temperature, pressure, time, catalyst concentration, and NBR concentration have been investigated. Even though both ruthenium‐ and palladium‐based catalysts are effective in the production of HNBR, the former requires harsh reaction conditions and has the drawback of gel formation under high conversion, motivating the migration to RuCl₂ (PPh₃)₃ as an alternative catalyst. The degree of hydrogenation was determined by IR and NMR spectroscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Chinongruppenhaltige Polymere als Träger zur Immobilisierung von Enzymen

Crosslinked poly(4-styrenesulfonic acid chloride) was reacted with 3-amino-4-hydroxyphenyl benzoate to give a reactive carrier after saponification and oxidation. Its binding ability was tested with α-chymotrypsin. The binding ability as well as the enzyme activity could be increased by introduction of spacers, e.g. ethylenediamine and hexamethylenediamine between the poly(styrene)-matrix and p-benzoquinone. Also crosslinked poly(vinyl alcohol) was reacted with p-benzoquinone to give a reactive carrier, which could also immobilize α-chymotrypsin. Some properties of the immobilized α-chymotrypsin as activity, pH-optimum and storage stability were investigated.     

Composition of the silk lipids of the spider Nephila clavipes

A detailed analysis of the lipids of spider silk is given for the first time. Extracts of the silk from the golden orb weaver, Nephila clavipes, were studied by gas chromatography, mass spectrometry, and chemical derivatizations. The major group of the lipids consisted of methyl-branched 1-methoxyalkanes (methyl ethers) with up to four methyl groups in the chain (chain length between C₂₈ and C₃₄), which are unique to spiders. The position of the methyl branches was determined by conversion into cyanides, which allowed easy location of methyl branches. The second-largest group included alkanes with a wide structural variety; 2-methyl-branched, even-numbered hydrocarbons predominated. A general numerical method for the estimation of retention indices of alkanes and their derivatives is presented. Further components of the web included alkanols and alkanediols, fatty acids, and glyceryl ethers. Some comments on the biosynthesis of these compounds are also given.     

Chemical analysis of volatiles emitted by Pinus svlvestris after induction by insect oviposition

Gas chromatography – mass spectrometry analyses of the headspace volatiles of Scots pine (Pinus sylvestris) induced by egg deposition of the sawfly Diprion pini were conducted. The odor blend of systemically oviposition-induced pine twigs, attractive for the eulophid egg parasitoid Chrysonotomyia ruforum, was compared to volatiles released by damaged pine twigs (control) that are not attractive for the parasitoid. The mechanical damage inflicted to the control twigs mimicked the damage by a sawfly female prior to egg deposition. The odor blend released by oviposition-induced pine twigs consisted of numerous mono- and sesquiterpenes, which all were also present in the headspace of the artificially damaged control twigs. A quantitative comparison of the volatiles from oviposition-induced twigs and controls revealed that only the amounts of (E)--farnesene were significantly higher in the volatile blend of the oviposition-induced twigs. Volatiles from pine twigs treated with jasmonic acid (JA) also attract the egg parasitoid. No qualitative differences were detected when comparing the composition of the headspace of JA-treated pine twigs with the volatile blend of untreated control twigs. JA-treated pine twigs released significantly higher amounts of (E)--farnesene. However, the JA treatment induced a significant increase of the amount of further terpenoid components. The release of terpenoids by pine after wounding, egg deposition, and JA treatment is discussed with special respect to (E)--farnesene.     

轻松三步添加USB功能

正对于当今的系统设计人员来说,通过一种快速且容易的方法把嵌入式系统连接到计算机已经成为系统设计的必要条件。而能使嵌入式应用与计算机通信的最常见方法是采用通用串行总线(USB),几乎可以在每一台台式电脑、笔记本电脑和平板电脑上发现通用串行总线。随着USB的普及,嵌入式开发人员面临着学习挑战,即如何使用USB协议以及如何把它集成到系统中。问题     

Wear Mechanism when Machining Compacted Graphite Iron

The industrial application of compacted graphite iron in the automotive industry is taking a rather long time due to its uneconomic machinability, because of a significant decrease in tool life. After six years of holistic research of the PTW in cooperation with foundries, manufactures and material scientists, the wear mechanism was understood and clarified: Sulphur in the microstructure of compacted graphite iron has direct influence on the formation of a manganese-sulphur layer on the cutting edge. For machining gray cast iron this layer protects the cutting edge against abrasive wear. Therefore the design of cutting tools for the machining of CGI must consider the absence of manganese-sulphur layer.     

Life time dependency on the pre-coating treatment of a thermal barrier coating under thermal cycling

A thermal barrier coating system consisting of the single crystalline Ni-based superalloy CMSX 4, a Pt aluminide bond coat and an EB-PVD processed ceramic top coat was thermally cycled in order to study the influence of three different treatments prior the deposition of the ceramic top coat. Besides the standard treatment, one type of treatment was annealing in vacuum, while the other was annealing in an O containing ArH atmosphere; in both cases for 4 h at 1080 °C.Compared to the standard treatment, annealing in vacuum almost doubled and annealing in ArH atmosphere almost tripled the cyclic life time of the ceramic coating. The improvement was related to the creation of a defined alumina scale before and during TBC deposition.